EASA Regulations & Airworthiness Directives

Browse 128 EASA regulations with AI-powered summaries.

Aircraft:AllAirbus A320286Airbus A321285Airbus A319253Airbus A350222Airbus A330220Airbus A318189Airbus A380182Boeing 737175Airbus A340141Airbus A350-941132Airbus BD-500 (A220 Series)123Airbus Helicopters AS 332119Airbus Helicopters EC 225116Airbus Helicopters SA 330116Boeing 787114Show all...
Filtered by: Airbus A350-941Clear filter

EASA AD 2019-0183

Jul 26, 2019

Electric and Electronic Common Installation — Cargo Lining Gutter Assemblies — Modification

EASA Airworthiness Directive 2019-0183 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It mandates a modification to the electric and electronic common installation, specifically the cargo lining gutter assemblies, to improve water drainage and prevent potential water spillage risks. This directive applies to all Airbus A350-941 aircraft except those with Airbus modification 111827 incorporated in production.

Airworthiness Directive
  • Airbus A350941

EASA AD 2017-0129R1

Jul 19, 2019

Integrated Modular Avionics — Internal Timer — Power Cycle (Reset)

EASA Airworthiness Directive 2017-0129R1 is an updated regulatory document addressing a potential unsafe condition in Airbus A350-941 aeroplanes related to the Integrated Modular Avionics internal timer. It applies to all Airbus A350-941 aircraft except those with Airbus modifications 112312 and 112313 incorporated during production. The directive mandates repetitive power cycle resets to prevent loss of communication between avionics systems and network, which could lead to partial or total loss of avionics functions.

Airworthiness Directive
  • Airbus A350941

EASA AD 2019-0175

Jul 19, 2019

Power Plant — Engine Mounts and Thrust Links Washers — Inspection / Replacement

EASA Airworthiness Directive 2019-0175 is an airworthiness directive affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the inspection and replacement of washers installed on engine mount primary pins and thrust links to prevent potential engine mount pin disengagement. The directive applies specifically to certain manufacturer serial numbers and references Airbus Alert Operators Transmission A71P016-19 for detailed instructions.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2019-0168

Jul 16, 2019

Superseded by EASA AD 2024-0186

EASA Airworthiness Directive 2019-0168 is an airworthiness directive issued for Airbus A350-941 and A350-1041 aeroplanes concerning the inspection of crew oxygen cylinder assemblies with part numbers 4441227-058-000 and 4441227-058-001. It addresses a design defect causing loss of retention of the regulator inlet filter retainer, which could lead to fire risk during ground operational testing. The directive mandates inspections and corrective actions to ensure continued airworthiness of affected oxygen cylinders.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2019-0076

Mar 29, 2019

Doors — Passenger Door Girt Bar Retention — Modification

EASA Airworthiness Directive 2019-0076 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses the passenger door girt bar retention system to prevent dislodgement issues that could impair the functionality of the emergency evacuation slides. This directive applies to all manufacturer serial numbers of the Airbus A350-941 model.

Airworthiness Directive
  • Airbus A350941

EASA AD 2019-0065

Mar 27, 2019

Fuselage — Rear Fuselage Cone Diagonal Struts — Replacement

EASA Airworthiness Directive 2019-0065 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It mandates the replacement of rear fuselage cone diagonal struts with new serviceable parts to ensure structural integrity. This directive applies to all serial numbers except those with Airbus modification 108588 incorporated during production.

Airworthiness Directive
  • Airbus A350941

EASA AD 2019-0020

Jan 31, 2019

Flight Controls — Slat Geared Rotary Actuators — Replacement

EASA Airworthiness Directive 2019-0020 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the replacement of slat geared rotary actuators (SGRA) with specific part numbers that have been found to have cracks due to manufacturing process issues. The directive mandates corrective actions to ensure continued safe operation of these aircraft.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2018-0290

Dec 21, 2018

Stabilizer — Vertical Stabilizer Tension Bolts — Modification

EASA Airworthiness Directive 2018-0290 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses corrosion protection issues in the vertical stabilizer tension bolts, specifically the section 19 holes of the Vertical Tail Plane tension bolts connection. The directive mandates modifications to improve corrosion protection to maintain structural integrity.

Airworthiness Directive
  • Airbus A350941

EASA AD 2018-0271

Dec 12, 2018

Superseded by EASA AD 2019-0115

EASA Airworthiness Directive 2018-0271 is an airworthiness directive issued for Airbus A350-941 aeroplanes with specific manufacturer serial numbers. It addresses the issue of baby bassinet inserts installed on stowages and partitions that were found loose due to missing application of a self-securing fixation device. The directive mandates repetitive inspections to ensure the tightness of these inserts to prevent potential detachment and injury.

Airworthiness DirectiveSuperseded
  • Airbus A350941

EASA AD 2018-0245R1

Dec 5, 2018

Superseded by EASA AD 2019-0168

EASA Airworthiness Directive 2018-0245R1 is an amendment addressing safety concerns on Airbus A350-941 and A350-1041 aeroplanes related to the crew oxygen cylinder assemblies with part number 4441227-058-000. The directive mandates operational checks and replacement of affected oxygen cylinder assemblies to prevent potential ignition or fire during ground operational testing. This directive applies to all manufacturer serial numbers of the specified Airbus A350 models.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2018-0244

Nov 13, 2018

Flight Controls — Flap / Slat Torque Shafts — Inspection / Replacement

EASA Airworthiness Directive 2018-0244 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It mandates inspection and potential replacement of flap and slat torque shaft junctions to ensure proper torque of nuts and prevent uncommanded slat or flap movements. The directive references Airbus Service Bulletin A350-27-P022 for detailed inspection and corrective actions.

Airworthiness Directive
  • Airbus A350941

EASA AD 2018-0246

Nov 13, 2018

Pneumatic — Engine Bleed Air System — Modification Aircraft Flight Manual — Amendment

EASA Airworthiness Directive 2018-0246 is an airworthiness directive affecting Airbus A350-941 and A350-1041 aeroplanes, excluding those with Airbus modification 113759 embodied in production. This directive addresses an issue with the engine bleed air system related to the Auxiliary Power Unit (APU) bleed leak alert and requires an amendment to the Aircraft Flight Manual (AFM).

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2018-0213R1

Nov 9, 2018

Superseded by EASA AD 2019-0301

EASA Airworthiness Directive 2018-0213R1 is an amendment addressing a technical issue in the inboard aileron electro-hydrostatic actuators on Airbus A350-941 and A350-1041 aeroplanes. The directive requires updates to the Aircraft Flight Manual and installation of specific software modifications to prevent potential loss of inboard aileron control. This directive applies to all serial numbers except those with Airbus modifications 113758 and 113759 incorporated during production.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2018-0220

Oct 12, 2018

Wings — Wing Rib Foot to Wing Lower Cover Clearance — Inspection / Temporary Operational Restrictions

EASA Airworthiness Directive 2018-0220 is an airworthiness directive issued by EASA affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses a potential unsafe condition related to the clearance between wing rib feet and the wing lower cover, which could lead to fuel tank ignition under certain conditions. The directive mandates inspections and temporary operational restrictions to ensure continued airworthiness.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2018-0145R3

Jul 24, 2018

Flight Controls — Elevators and Rudder Servocontrols — Replacement / Modification

EASA Airworthiness Directive 2018-0145R3 is an updated regulatory requirement addressing flight controls on Airbus A350-941 and A350-1041 aeroplanes. It mandates the replacement or modification of certain elevators and rudder servocontrols identified as affected parts due to potential uncommanded actuator movements. This directive applies to all manufacturer serial numbers of the specified Airbus A350 models.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2018-0154

Jul 19, 2018

Fire Protection — Engine Fire Extinguishing Pipes — Inspection

EASA Airworthiness Directive 2018-0154 is an airworthiness directive addressing Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection of engine fire extinguishing pipes in the engine fan case zone and engine core zone to ensure protective caps have been removed. This directive aims to prevent failure of the fire extinguishing system in case of an engine fire.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2018-0141

Jul 3, 2018

Superseded by EASA AD 2020-0027

EASA Airworthiness Directive 2018-0141 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the inspection and possible replacement of Electro-Hydrostatic Actuators (EHA) installed on the inboard ailerons, elevators, and rudder due to potential insulation resistance degradation. The directive mandates a one-time insulation check of affected EHAs and corrective actions based on the inspection results.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2018-0123

Jun 4, 2018

Fuselage — Tail Cone Balancer Fitting Anchor Nuts and Fasteners — Modification

EASA Airworthiness Directive 2018-0123 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses corrosion protection issues related to the tail cone balancer fitting anchor nuts and fasteners on these aircraft. The directive mandates a modification to improve corrosion resistance on specific parts of the tail cone structure.

Airworthiness Directive
  • Airbus A350941