EASA Regulations & Airworthiness Directives

Browse 136 EASA regulations with AI-powered summaries.

Filtered by: Airbus A340Clear filter

EASA AD 2026-0026

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 2 — Damage Tolerant Airworthiness Limitation Items — Amendment

EASA Airworthiness Directive 2026-0026 is an amendment concerning the Airbus A340 series, including models A340-211, -212, -213, -311, -312, -313, -541, -542, -642, and -643. It updates the Airworthiness Limitations Section Part 2 related to Damage Tolerant Airworthiness Limitation Items. This directive mandates compliance with revised maintenance tasks to ensure continued airworthiness of these aircraft.

Feb 10, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A340

EASA AD 2026-0014

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 3 — Certification Maintenance Requirements — Amendment

EASA Airworthiness Directive 2026-0014 is an amendment concerning the Time Limits and Maintenance Checks outlined in the Airworthiness Limitations Section Part 3, specifically addressing Certification Maintenance Requirements for the Airbus S.A.S. A340 aircraft. This directive updates maintenance protocols to ensure continued airworthiness and safety compliance for the Airbus A340 fleet. It provides revised instructions for maintenance checks and time limits applicable to this aircraft type.

Jan 20, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A340

EASA AD 25-194

Fuel — Fuel Low Pressure Shut-Off Valve — Leak Check

EASA Airworthiness Directive Proposal PAD No. 25-194 addresses fuel low pressure shut-off valve leak checks on Airbus A330 and A340 aeroplanes. It applies to specific models including A330-243, A330-243F, A330-341, A330-342, A330-343, A330-743L, A330-841, A330-941, and A340-211 through A340-643 series. The directive targets certain fuel low pressure shut-off valve part numbers to prevent fuel leaks that could lead to fire hazards.

Dec 16, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2025-0241

Navigation — Angle of Attack Backplate — Repair

EASA Airworthiness Directive 2025-0241 is an airworthiness directive affecting Airbus A330 and A340 aeroplanes, specifically those with Angle of Attack (AOA) backplates having Part Number A5341054920000. The directive addresses potential safety issues related to incorrect data in Airbus technical drawings used for reinstalling AOA backplates. It mandates inspections and corrective actions to ensure the accuracy and reliability of AOA sensor data on affected aircraft.

Oct 29, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2025-0202

Landing Gear — Nose Landing Gear Retraction Actuator — Inspection

EASA Airworthiness Directive 2025-0202 is an airworthiness directive addressing the nose landing gear retraction actuator on Airbus A330 and A340 aeroplanes. It applies to specific part numbers and serial numbers of the nose landing gear retraction actuator, requiring inspection due to potential disconnection risks. The directive targets all manufacturer serial numbers of affected A330 and A340 models.

Sep 18, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2025-0175

Aircraft Flight Manual — Sections Limitations and Normal Procedures — Amendment Master Minimum Equipment List — Amendment

EASA Airworthiness Directive 2025-0175 is an amendment affecting Airbus A330 and A340 aeroplanes, covering updates to the Aircraft Flight Manual (AFM) sections on limitations and normal procedures, as well as the Master Minimum Equipment List (MMEL). The directive addresses specific models including A330-201 through A330-343 and A340-211 through A340-643, requiring changes related to flight with landing gear down operations and associated system alerts.

Aug 8, 2025
Airworthiness DirectiveFlight OpsMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2025-0169

Flight Controls — Trimmable Horizontal Stabilizer Actuator / Electric Load Sensing Device — Modification

EASA Airworthiness Directive 2025-0169 is an official regulatory document addressing modifications to the flight controls, specifically the Trimmable Horizontal Stabilizer Actuator (THSA) and Electric Load Sensing Device (ELSD) on Airbus A330 and A340 aeroplanes. This directive applies to various Airbus A330 models up to manufacturer serial number 1919 (excluding MSN 1915) and all Airbus A340-211, -212, -213, -311, -312, and -313 models. The AD mandates modifications to improve safety related to the THSA's secondary load path and the installation and activation of the ELSD.

Jul 31, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2025-0058R1

Time Limits / Maintenance Checks — Airworthiness Limitation Section Part 4, System Equipment Maintenance Requirements — Amendment

EASA Airworthiness Directive 2025-0058R1 is an amendment addressing maintenance requirements for Airbus A340-211, A340-212, A340-213, A340-311, A340-312, and A340-313 aeroplanes. It mandates compliance with updated System Equipment Maintenance Requirements as specified in Airbus A340 Airworthiness Limitations Section Part 4 Variation 8.1. This directive ensures continued airworthiness by enforcing new or more restrictive maintenance tasks and life limits for components.

Mar 19, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A340

EASA AD 2025-0060R1

Time Limits / Maintenance Checks — Airworthiness Limitation Section Part 5, Fuel Airworthiness Limitations — Amendment

EASA Airworthiness Directive 2025-0060R1 is an amendment addressing the Airworthiness Limitation Section Part 5 related to Fuel Airworthiness Limitations for Airbus A340-313 aeroplanes. It updates maintenance requirements and life limits for fuel system components to ensure continued airworthiness. This directive applies to all Airbus A340-313 serial numbers and revises previous instructions to incorporate new or more restrictive tasks.

Mar 19, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A340

EASA AD 2025-0053

Doors — Forward Passenger/Crew Doors — Inspection

The document titled 'Doors — Forward Passenger/Crew Doors — Inspection' is an airworthiness directive applicable to AIRBUS S.A.S. A330 and A340 aircraft models. It addresses inspection requirements for the forward passenger and crew doors to ensure continued airworthiness and safety. The directive provides guidance on inspection procedures specific to these aircraft types.

Mar 5, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2023-0167R1

Landing Gear — Main Landing Gear Axles — Inspection

EASA Airworthiness Directive 2023-0167R1 is a regulatory document addressing inspection requirements for main landing gear axles with Part Number 55-2117042-00 installed on Airbus A330 and A340 aeroplanes. It applies to specific serial numbers of these axles that may have coating defects leading to corrosion and potential failure. The directive mandates repetitive inspections and corrective actions to ensure continued airworthiness of affected aircraft.

Feb 27, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2025-0041

Flight Controls — Trimmable Horizontal Stabilizer Actuator — Modification

The Flight Controls — Trimmable Horizontal Stabilizer Actuator — Modification is an airworthiness directive issued by AIRBUS S.A.S. affecting multiple aircraft types including the A318, A319, A320, A321, A330, and A340. This document addresses modifications related to the trimmable horizontal stabilizer actuator system to ensure continued safe flight control operations. It applies specifically to the listed Airbus aircraft models equipped with the affected actuator components.

Feb 18, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321Airbus A330Airbus A340

EASA AD 2024-0247

SUPERSEDED BY EASA AD 2025-0041

EASA Airworthiness Directive 2024-0247 is issued for Airbus A318, A319, A320, A321, A330, and A340 aeroplanes. It addresses issues related to Trimmable Horizontal Stabilizer Actuators (THSA) that have erroneous accumulated life data in their release certificates. This directive applies to specific THSA parts identified by Collins Aerospace and Airbus documentation.

Dec 18, 2024
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321Airbus A330Airbus A340

EASA AD 2020-0273-CN

CANCELLED: Oxygen — Oxygen Supply Solenoid Valve — Inspection / Replacement

EASA Airworthiness Directive Cancellation Notice 2020-0273-CN cancels the previous EASA AD 2020-0273 which applied to Airbus A330 and A340 aeroplanes. The cancelled directive addressed inspection and replacement requirements for oxygen supply solenoid valves with specific part numbers and manufacturing years. This cancellation applies to all manufacturer serial numbers of the affected Airbus A330 and A340 models.

Dec 17, 2024
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340

EASA SIB 2017-16R1

Maintenance of Emergency Evacuation Systems

EASA Safety Information Bulletin 2017-16R1 is a revision addressing the maintenance of emergency evacuation systems specifically for Airbus A330 and A340 aircraft. It highlights issues with damaged aspirators in Goodrich (UTAS) escape slides, part number 7A1509 series, caused by improper folding procedures. The bulletin provides updated references and maintenance recommendations to ensure proper slide performance during emergency evacuations.

Dec 17, 2024
Safety Information BulletinMaintenanceSafety MgmtAirbus A330Airbus A340

EASA AD 2024-0214

Time Limits / Maintenance Checks — Safe Life Airworthiness Limitations Items — ALS Part 1 — Amendment

EASA Airworthiness Directive 2024-0214 is an amendment addressing the Airbus A340 series, including models A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642, and A340-643. This directive updates the Safe Life Airworthiness Limitations Items in the Airbus A340 Airworthiness Limitations Section (ALS) Part 1, Revision 13. It mandates compliance with revised maintenance tasks and life limits to ensure continued airworthiness.

Nov 14, 2024
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A340

EASA AD 2024-0198

Oxygen — Chemical Oxygen Generators — Replacement

EASA Airworthiness Directive 2024-0198 is an official regulatory document addressing the replacement of chemical oxygen generators in various Airbus aeroplanes, including models A310, A300, A318, A319, A320, A321, A330, and A340. The directive targets specific oxygen generators with part numbers E63320-00, E63340-00, and E63440-00 that have known activation failures. It mandates replacement of these affected parts to ensure continued airworthiness and safety.

Oct 18, 2024
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A300-600Airbus A300-600ST (Beluga)Airbus A310Airbus A318Airbus A319Airbus A320Airbus A321Airbus A330Airbus A340Airbus A300

EASA AD 2024-0197

Oxygen — SafeLav Gaseous Oxygen Container — Replacement

EASA Airworthiness Directive 2024-0197 is issued for Airbus A318, A319, A320, A321, A330, and A340 aeroplanes concerning the SafeLav gaseous oxygen container (SLGOC). The directive addresses a production deficiency in certain SLGOC batches that may cause oxygen flow activation failure due to a missing heat treatment on the actuation pin. This AD applies to specific part numbers and serial numbers of SLGOCs installed on these aircraft models.

Oct 18, 2024
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321Airbus A330Airbus A340

EASA AD 2024-0143

Stabilizers — Maintenance Instructions — Amendment

EASA Airworthiness Directive 2024-0143 is an amendment addressing maintenance instructions for stabilizers on Airbus A330 and A340 aeroplanes. It applies to all manufacturer serial numbers of specified A330 and A340 models. The directive prohibits the use of certain maintenance manual instructions that incorrectly recommend oxygen for pressure testing, which could lead to safety hazards.

Jul 19, 2024
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A330Airbus A340