EASA Regulations & Airworthiness Directives

Browse 189 EASA regulations with AI-powered summaries.

Aircraft:AllAirbus A320286Airbus A321285Airbus A319253Airbus A350222Airbus A330220Airbus A318189Airbus A380182Boeing 737175Airbus A340141Airbus A350-941132Airbus BD-500 (A220 Series)123Airbus Helicopters AS 332119Airbus Helicopters EC 225116Airbus Helicopters SA 330116Boeing 787114Show all...
Filtered by: Airbus A318Clear filter

EASA PAD 26-113

Sep 23, 2026

Engine – High Pressure Turbine Front Seal – Inspection

EASA Airworthiness Directive Proposal 26-113 is a regulatory document addressing the inspection of the High Pressure Turbine (HPT) front seal on CFM INTERNATIONAL S.A. CFM56-5B and CFM56-7B engine models. These engines are commonly installed on Airbus A318, A319, A320, and A321 series aircraft, as well as Boeing 737-600, 737-700, 737-800, 737-900, and 737-900ER series aircraft. The directive proposes a one-time on-wing borescope inspection to detect potential misalignment and cracks in the HPT front seal to prevent uncontained part release and possible engine or aircraft damage.

Proposed AD
  • CFM International CFM56-5B
  • CFM International CFM56-7B
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321
  • Boeing 737

EASA AD 2026-0176

Sep 11, 2026

Electrical Systems Installation – Battery Retaining Rods – Identification / Replacement

EASA Airworthiness Directive 2026-0176 is an aviation safety regulation addressing battery retaining rods on Airbus A318, A319, A320, and A321 aeroplanes. It applies to specific battery retaining rods with Part Number D9241023700000 manufactured by SUDAERO or unknown suppliers, focusing on identification, inspection, and replacement to prevent battery displacement. The directive mandates inspections and corrective actions to ensure continued airworthiness of affected aircraft.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA PAD 26-102

Sep 9, 2026

Fuselage – Cockpit Floor Structure – Inspections

EASA Airworthiness Directive Proposal 26-102 is a proposed regulation targeting Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspections of the cockpit floor structure, specifically between cross beams Frame 8 and Frame 12, to detect mechanical damage such as cracks and missing fasteners. The directive aims to maintain structural integrity by addressing damage beyond corrosion in this critical fuselage area.

Proposed AD
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA PAD 26-093

Jul 31, 2026

Electrical Systems Installation – Battery Retaining Rods – Identification / Replacement

EASA Airworthiness Directive PAD No. 26-093 is a proposed directive addressing battery retaining rods on Airbus A318, A319, A320, and A321 aeroplanes. It focuses on identifying and replacing affected battery retaining rods with part number D9241023700000 that may have quality defects leading to potential battery displacement and electrical system failures. The directive applies to all manufacturer serial numbers of the specified Airbus models, including the A321-251NX and A321-271NX variants.

Proposed AD
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2026-0142

Jul 20, 2026

Wings – Main Landing Gear Support Rib 5 – Inspections

EASA Airworthiness Directive 2026-0142 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A318, A319, A320, and A321 aeroplanes with specific manufacturer serial numbers. The directive mandates inspections of the main landing gear support rib 5 due to identified quality issues that could lead to fatigue damage and potential structural failure. It applies to affected parts listed by part and serial numbers in the directive's appendix.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2026-0136

Jul 10, 2026

Flights Controls – Trimmable Horizontal Stabilizer Actuator Ballscrew Lower Splines – Inspection / Replacement

EASA Airworthiness Directive 2026-0136 is an airworthiness directive addressing corrosion issues in the trimmable horizontal stabilizer actuator (THSA) ballscrew lower splines on Airbus A318, A319, A320, and A321 aircraft. It applies to specific THSA part numbers that may suffer corrosion leading to potential loss of control of the airplane. The directive mandates inspections and possible replacement of affected parts to ensure continued airworthiness.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2026-0133

Jul 8, 2026

Fuselage – Centre Fuselage Forward Pressure Bulkhead – Inspection

EASA Airworthiness Directive 2026-0133 is an airworthiness directive addressing inspection requirements for the centre fuselage forward pressure bulkhead on Airbus A318, A319, A320, and A321 aeroplanes. It applies to various models and serial numbers except those with specific Airbus modifications embodied in production or service. The directive mandates repetitive rototest inspections of the forward pressure bulkhead hole C1 and provides an optional terminating modification.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2025-0274R1

Jul 7, 2026

Fire Protection – Fire Panel – Inspection

EASA Airworthiness Directive 2025-0274R1 is a regulatory update addressing fire panel inspections on Airbus A318, A319, A320, and A321 aircraft. It targets specific fire panel part numbers that have been linked to incidents of engine fire switch self-releasing, which could cause uncommanded in-flight engine shutdowns. The directive mandates inspections, replacements, and installation requirements to ensure continued airworthiness and safety.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2025-0158R2

Jul 7, 2026

Landing Gear – Main Landing Gear Door Actuators – Inspections

EASA Airworthiness Directive 2025-0158R2 is an updated regulatory requirement addressing inspections and corrective actions for main landing gear door actuators on Airbus A318, A319, A320, and A321 aircraft models. It targets actuators with specific part number 114122015 and serial numbers listed in Airbus Alert Operators Transmission A32N033-24, aiming to prevent landing gear extension issues caused by actuator assembly errors. The directive mandates repetitive inspections and eventual replacement or modification of affected parts to ensure continued airworthiness.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2026-0130

Jul 6, 2026

Electrical Systems Installation – Battery Retaining Rods – Identification / Replacement

EASA Airworthiness Directive 2026-0130 is an airworthiness directive addressing battery retaining rods on Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspections and potential replacement or reidentification of affected battery retaining rods with Part Number D9241023700000 to prevent battery displacement and associated electrical system failures.

Airworthiness DirectiveSuperseded
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2025-0237R1

Jun 24, 2026

[Correction] Equipment / Furnishings – 80 VU Rack Attachments – Inspection / Repair

The document titled '[Correction] Equipment / Furnishings – 80 VU Rack Attachments – Inspection / Repair' is a correction notice related to Airbus S.A.S. aircraft models A318, A319, A320, and A321. It addresses inspection and repair procedures for the 80 VU rack attachments used in these aircraft. The correction ensures accurate maintenance guidelines for these specific equipment components.

Correction
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2026-0037

Feb 25, 2026

Equipment/Furnishings — Evacuation Slide/Inflation Hose Assemblies — Replacement

EASA Airworthiness Directive 2026-0037 is an official safety directive addressing evacuation slide inflation hose assemblies on Airbus A318, A319, A320, and A321 aircraft. It targets specific inflation hose assemblies and door evacuation slides identified by part and serial numbers that have been found to fail during emergency evacuations. The directive mandates the replacement of affected evacuation slides to ensure proper inflation and safe evacuation.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2026-0028

Feb 11, 2026

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 2 — Damage Tolerant Airworthiness Limitation Items — Amendment

EASA Airworthiness Directive 2026-0028 is an amendment concerning the Airbus A318, A319, A320, and A321 aircraft family. It addresses updates to the Airworthiness Limitations Section Part 2, specifically the Damage Tolerant Airworthiness Limitation Items. This directive mandates compliance with revised maintenance tasks and intervals to ensure continued airworthiness of these aircraft models.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA PAD 26-022

Feb 4, 2026

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 1, Safe Life Airworthiness Limitation Items — Amendment

EASA Airworthiness Directive 26-022 is a proposed amendment addressing the Time Limits and Maintenance Checks in the Airworthiness Limitations Section Part 1 for Airbus A318, A319, A320, and A321 aeroplanes. It applies to all manufacturer serial numbers of these models and updates the safe life airworthiness limitation items. The directive ensures continued airworthiness by mandating compliance with the latest Airbus ALS Part 1, Revision 11 issue 2.

Proposed AD
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA PAD 26-023

Feb 4, 2026

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 3, Certification Maintenance Requirements — Amendment

EASA Airworthiness Directive 26-023 is a proposed amendment affecting Airbus A318, A319, A320, and A321 aeroplanes. It updates the Airworthiness Limitations Section Part 3, Certification Maintenance Requirements, introducing new and more restrictive maintenance tasks and limitations. This directive applies to all manufacturer serial numbers of the specified Airbus A320 family models.

Proposed AD
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA PAD 26-024

Feb 4, 2026

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 4, System Equipment Maintenance Requirements — Amendment

EASA Airworthiness Directive 26-024 is a proposed amendment addressing time limits and maintenance checks for Airbus A318, A319, A320, and A321 aeroplanes. It updates the Airworthiness Limitations Section Part 4 concerning System Equipment Maintenance Requirements. This directive applies to all manufacturer serial numbers of the specified Airbus A320 family models.

Proposed AD
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA PAD 26-025

Feb 4, 2026

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 5, Fuel Airworthiness Limitations — Amendment

EASA Airworthiness Directive 26-025 is a proposed amendment affecting Airbus A318, A319, A320, and A321 aeroplanes. It updates the Airworthiness Limitations Section Part 5 related to Fuel Airworthiness Limitations, applying to all manufacturer serial numbers of these aircraft models. The directive mandates compliance with the latest Airbus ALS Part 5, Revision 10, to ensure continued airworthiness.

Proposed AD
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2026-0017

Jan 23, 2026

Equipment / Furnishings — Galley — Inspection

EASA Airworthiness Directive 2026-0017 is an inspection directive addressing forward-facing galley equipment on Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspections and corrective actions for specific galley part numbers to prevent damage such as delamination and corrosion that could lead to trolley detachment during emergency landings. The directive applies to all serial numbers of the affected aircraft models.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2025-0274

Dec 11, 2025

[Correction] Fire Protection — Fire Panel — Inspection

The document titled '[Correction] Fire Protection — Fire Panel — Inspection' is a correction notice related to the Airbus S.A.S. aircraft types A318, A319, A320, and A321. It addresses inspection procedures for the fire protection fire panel systems on these specific Airbus models. The correction aims to clarify or amend previous instructions to ensure proper maintenance and safety compliance.

Correction
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321

EASA AD 2025-0258

Nov 21, 2025

Landing Gear — Nose Landing Gear Sliding Tube — Inspection

EASA Airworthiness Directive 2025-0258 is an airworthiness directive addressing the nose landing gear sliding tube on Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspection of specific nose landing gear sliding tubes with part number 50-3752016-00 and certain serial numbers for overheat damage and cracks. The directive applies to all affected serial numbers listed and requires corrective actions if discrepancies are found.

Airworthiness Directive
  • Airbus A318
  • Airbus A319
  • Airbus A320
  • Airbus A321