EASA Regulations & Airworthiness Directives

Browse 128 EASA regulations with AI-powered summaries.

Aircraft:AllAirbus A320286Airbus A321285Airbus A319253Airbus A350222Airbus A330220Airbus A318189Airbus A380182Boeing 737175Airbus A340141Airbus A350-941132Airbus BD-500 (A220 Series)123Airbus Helicopters AS 332119Airbus Helicopters EC 225116Airbus Helicopters SA 330116Boeing 787114Show all...
Filtered by: Airbus A350-941Clear filter

EASA AD 2020-0163R2

Sep 10, 2020

Superseded by EASA AD 2021-0053

EASA Airworthiness Directive 2020-0163R2 is an updated safety directive addressing Airbus A350-941 and A350-1041 aeroplanes. It mandates inspections and corrective actions related to the slat transmission shafts and slat power control unit torque sensing units to prevent slat system jams during landing. The directive aims to ensure continued airworthiness by requiring health checks, detailed inspections, and cleaning procedures on affected components.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2020-0166

Jul 27, 2020

Fuselage — Seat Track Extremities — Inspection / Repair

EASA Airworthiness Directive 2020-0166 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection and potential repair of seat track extremities located between specific fuselage frames to address a structural deficiency. The directive applies to aircraft identified by manufacturer serial numbers as specified in Airbus Service Bulletin A350-53-P061.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2020-0090R1

Jul 21, 2020

Superseded by EASA AD 2020-0203

EASA Airworthiness Directive 2020-0090R1 is an amendment addressing safety concerns on Airbus A350-941 and A350-1041 aeroplanes related to inadvertent liquid spillage on the ENG START panel or Electronic Centralized Aircraft Monitoring Control Panel. This directive mandates modifications and operational changes to prevent uncommanded engine in-flight shutdowns caused by liquid contamination. It applies to all affected A350 aircraft except those with specific water-resistant modifications.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2020-0139R1

Jul 3, 2020

Superseded by EASA AD 2025-0073

EASA Airworthiness Directive 2020-0139R1 is an updated directive addressing the inspection and potential repair of horizontal tail plane lateral load fitting bushings on Airbus A350-941 and A350-1041 aeroplanes. It applies to all serial numbers except those with Airbus modifications 110669 or 114806 incorporated. The directive mandates repetitive detailed inspections and corrective actions to prevent structural failure due to bushing migration and associated corrosion or fatigue damage.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2020-0123

May 29, 2020

Superseded by EASA AD 2023-0068

EASA Airworthiness Directive 2020-0123 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes, except those with Airbus modification 109799 incorporated in production. The directive addresses an unsafe condition related to the rotation of certain fasteners in the centre wing box, which could lead to fuel vapour leakage inside the cabin. This directive mandates the replacement of affected fasteners with improved friction material fasteners to ensure continued airworthiness.

Airworthiness DirectiveSuperseded
  • Airbus A350941

EASA AD 2020-0109

May 15, 2020

Fuselage — Frame 98 Flange Feet between Stringers 15 and 17 — Inspection / Modification

EASA Airworthiness Directive 2020-0109 is an airworthiness directive issued by EASA affecting Airbus A350-941 aeroplanes, except those with Airbus modification 114295 incorporated in production. It mandates inspection and potential modification of the fuselage frame 98 flange feet between stringers 15 and 17 to ensure structural integrity. The directive addresses potential fatigue and damage tolerance issues in the rear cone of the fuselage.

Airworthiness Directive
  • Airbus A350941

EASA AD 2020-0091

Apr 22, 2020

Superseded by EASA AD 2021-0206

EASA Airworthiness Directive 2020-0091 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with updated safe life airworthiness limitations specified in the Airbus A350 Airworthiness Limitations Section Part 1, Revision 04 including Variation 4.3. The directive ensures continued airworthiness by requiring operators to adhere to new or more restrictive maintenance tasks and life limits for components.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2020-0071

Mar 25, 2020

Fuselage — Rear Cone Diagonal Struts — Inspection

EASA Airworthiness Directive 2020-0071 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A350-941 aeroplanes with specific manufacturer serial numbers. It mandates inspection of the fuselage rear cone diagonal struts located at frame 102 in section 19 to ensure proper locking of the diagonal struts. The directive aims to prevent potential structural integrity issues that could affect the horizontal tail plane attachments or rear cone joints.

Airworthiness Directive
  • Airbus A350941

EASA AD 2020-0060

Mar 16, 2020

Exhaust — Pressure Relief Latch Access Doors — Modification

EASA Airworthiness Directive 2020-0060 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses a safety issue related to the pressure relief latch access doors and thrust reversers on these aircraft. The directive mandates modifications to improve thermal protection and prevent potential fire hazards.

Airworthiness Directive
  • Airbus A350941

EASA AD 2020-0027R1

Feb 21, 2020

Flight Controls — Aileron, Elevator and Rudder Electro-Hydrostatic Actuators — Inspection / Replacement

EASA Airworthiness Directive 2020-0027R1 is an updated regulatory requirement addressing inspection and replacement of Electro-Hydrostatic Actuators (EHAs) for the aileron, elevator, and rudder flight controls on Airbus A350-941 and A350-1041 aircraft. The directive mandates insulation resistance checks and corrective actions for affected EHAs to ensure continued safe operation of these flight control components.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2020-0031

Feb 18, 2020

Superseded by EASA AD 2022-0112

EASA Airworthiness Directive 2020-0031 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses an unsafe condition related to passenger oxygen masks that may stick and fail to fully inflate after exposure to high ground temperatures. The directive mandates replacement of affected passenger oxygen masks to ensure continued airworthiness.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2020-0028

Feb 14, 2020

Exhaust — Thrust Reverser Hinge Nut — Inspection / Replacement

EASA Airworthiness Directive 2020-0028 is an airworthiness directive addressing Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection and replacement of thrust reverser hinge nuts on both engines to ensure continued airworthiness and safety. The directive references Airbus Service Bulletin A350-78-P013 and Goodrich Service Bulletin RA35078-059 for detailed instructions.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2020-0020-E

Feb 6, 2020

Superseded by EASA AD 2020-0090

EASA Airworthiness Directive 2020-0020-E is an emergency directive affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the risk of un-commanded engine in-flight shutdowns caused by liquid spillage on the ENG START panel or ECAM Control Panel in the flight deck. The directive mandates amendments to the Airbus A350 Airplane Flight Manual to include procedures for handling liquid spillage in the cockpit.

Airworthiness DirectiveSuperseded
  • Airbus A3509411041

EASA AD 2019-0301

Dec 12, 2019

Flight Controls — Aileron and Elevator Electro-Hydrostatic Actuators — Modification Aircraft Flight Manual — Amendment

EASA Airworthiness Directive 2019-0301 is an amendment addressing flight control issues on Airbus A350-941 and A350-1041 aeroplanes. It focuses on the modification of electro-hydrostatic actuators (EHA) for inboard ailerons and elevators, specifically parts with P/N CA67001-025, CB36001-003, and CA67006-025. The directive mandates updates to the Aircraft Flight Manual and installation of modifications to ensure continued airworthiness.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2019-0181R1

Nov 12, 2019

Fuselage — Forward and Aft Cargo Door Latch Fitting External Lugs — Inspection / Modification

EASA Airworthiness Directive 2019-0181R1 is an updated regulatory requirement affecting Airbus A350-941 aeroplanes, specifically addressing the forward and aft cargo door latch fitting external lugs. The directive mandates inspections and potential modifications to aluminium latch fittings to ensure structural integrity. It applies to all serial numbers except those with Airbus modifications 107020 and 107049 incorporated during production.

Airworthiness Directive
  • Airbus A350941

EASA AD 2019-0265

Oct 25, 2019

Wings — Main Landing Gear Forward Pintle Bearing Lock Washer Tabs and Nuts — Inspection

EASA Airworthiness Directive 2019-0265 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspections of the main landing gear forward pintle bearing lock washer tabs and nuts to ensure proper installation and locking. The directive addresses a potential unsafe condition related to incorrect lock washer tab engagement that could lead to main landing gear collapse.

Airworthiness Directive
  • Airbus A3509411041

EASA AD 2019-0210

Aug 26, 2019

Superseded by EASA AD 2024-0220

EASA Airworthiness Directive 2019-0210 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection of cabin oxygen containers and adjacent panel fasteners to ensure proper installation and prevent oxygen mask deployment failure. The directive applies to specific manufacturer serial numbers as listed in Airbus Alert Operators Transmission A35P015-19.

Airworthiness Directive
  • Airbus A3509411041