EASA Regulations & Airworthiness Directives

Browse 128 EASA regulations with AI-powered summaries.

Aircraft:AllAirbus A320286Airbus A321285Airbus A319253Airbus A350222Airbus A330220Airbus A318189Airbus A380182Boeing 737175Airbus A340141Airbus A350-941132Airbus BD-500 (A220 Series)123Airbus Helicopters AS 332119Airbus Helicopters EC 225116Airbus Helicopters SA 330116Boeing 787114Show all...
Filtered by: Airbus A350-941Clear filter

EASA AD 2018-0111R1

May 30, 2018

Water/Waste — Forward Fuselage Shrouded Pipe T-Boxes and Clamps — Replacement

EASA Airworthiness Directive 2018-0111R1 is an updated regulatory requirement addressing the replacement of potable water shrouded pipe T-Boxes and clamps on Airbus A350-941 aeroplanes. This directive applies to all serial numbers except those with Airbus modifications 111435 or 111440 incorporated during production. It mandates corrective action to prevent water ingress into the avionics bay caused by cracks and clamp torque loss.

Airworthiness Directive
  • Airbus A350941

EASA AD 2018-0045

Feb 22, 2018

Superseded by EASA AD 2018-0290

EASA Airworthiness Directive 2018-0045 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses corrosion protection issues related to the vertical stabilizer tension bolts on these aircraft. The directive mandates a modification to improve corrosion protection and maintain structural integrity of the vertical tail plane.

Airworthiness DirectiveSuperseded
  • Airbus A350941

EASA AD 2018-0036

Feb 7, 2018

Fuselage / Stabilizers — Interfay Sealant in Hybrid Joints — Modification

EASA Airworthiness Directive 2018-0036 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses the application of interfay sealant in hybrid joints on the fuselage and stabilizers to prevent corrosion and maintain structural integrity. The directive applies to all serial numbers except those with specific Airbus production modifications already embodied.

Airworthiness Directive
  • Airbus A350941

EASA AD 2018-0037

Feb 7, 2018

Superseded by EASA AD 2019-0206

EASA Airworthiness Directive 2018-0037 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It mandates repetitive inspections of the trimmable horizontal stabilizer fittings and bearing assembly attachment interface to detect damage or corrosion. The directive aims to ensure continued airworthiness by preventing potential loss of attachment of the stabilizer to the fuselage.

Airworthiness DirectiveSuperseded
  • Airbus A350941

EASA AD 2018-0031

Jan 31, 2018

Doors — Forward and Aft Cargo Door Frame Forks — Inspection

EASA Airworthiness Directive 2018-0031 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It mandates inspection of forward and aft cargo door frame forks, specifically parts with certain part numbers and serial numbers, due to paint peeling issues that could lead to corrosion. The directive aims to ensure continued airworthiness by requiring detailed inspections and corrective actions if necessary.

Airworthiness Directive
  • Airbus A350941

EASA AD 2018-0008

Jan 10, 2018

Wings — Main Landing Gear Trunnion Block Fuse Pin Retaining Pins — Inspection / Replacement

EASA Airworthiness Directive 2018-0008 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes with manufacturer serial numbers 0006 to 0040, excluding MSN 0025, 0032, 0033, 0036, 0038, and 0039. The directive addresses inspection and possible replacement of the main landing gear trunnion block fuse pin retaining pins to ensure continued airworthiness and safety.

Airworthiness Directive
  • Airbus A350941

EASA AD 2018-0004

Jan 9, 2018

Superseded by EASA AD 2019-0288

EASA Airworthiness Directive 2018-0004 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 aeroplanes. It mandates compliance with the Airbus A350 Airworthiness Limitations Section (ALS) Part 3 Revision 04, which contains certification maintenance requirements essential for continued airworthiness. This directive updates previous maintenance requirements to ensure safe operation of the affected aircraft.

Airworthiness DirectiveSuperseded
  • Airbus A350941