RegNotify

EASA Regulations for Airbus A350

206 airworthiness directives and regulations affecting Airbus A350.

EASA AD 2023-0051

Doors — Main Landing Gear Doors / Axis Index Washer — Inspection

EASA Airworthiness Directive 2023-0051 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It mandates inspection of the axis index washers on the main landing gear doors to ensure correct installation. The directive addresses a potential safety issue related to inverted washers that could compromise the structural integrity of the landing gear door hinges.

Mar 10, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2022-0217R1

Hydraulic Power — Nose Landing Gear Pressure Return Lines — Replacement

EASA Airworthiness Directive 2022-0217R1 is a regulatory update addressing the replacement of low pressure hydraulic pipes in the nose landing gear pressure return lines on Airbus A350-941 and A350-1041 aeroplanes. The directive mandates the removal and replacement of affected hydraulic pipes identified by specific part numbers due to corrosion and ovality issues. This directive applies to all manufacturer serial numbers of the specified Airbus A350 models.

Mar 1, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2023-0026

Nacelles / Pylons — Pylons Rib 1 — Inspection

EASA Airworthiness Directive 2023-0026 is an airworthiness directive issued by EASA concerning Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection of the pylon rib 1 at the forward engine mount bolting area to detect excessively deep spot faces that could cause interference damage and reduce structural integrity. The directive applies specifically to certain manufacturer serial numbers as listed in the Airbus Service Bulletins A350-54-P006 and A350-54-P008.

Jan 30, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2023-0004

SUPERSEDED BY EASA AD 2024-0005

EASA Airworthiness Directive 2023-0004 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with the Airbus A350 Airworthiness Limitations Section Part 2 Variation 8.1, which contains damage tolerant airworthiness limitation items necessary for continued safe operation of these aircraft models.

Jan 6, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0263

Landing Gear — Main Landing Gear Bogie Pivot Pin — Greasing

EASA Airworthiness Directive 2022-0263 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses the main landing gear bogie pivot pin, specifically requiring updated greasing procedures to prevent damage to the High Velocity Oxygen Fuel coating on these parts. The directive aims to ensure continued airworthiness and prevent potential landing gear collapse.

Dec 21, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2022-0211

Flight Control and Guidance System — Integrated Modular Avionics / Core Processing Input Output Modules — Modification (Software Update); Flight Controls — Primary Flight Control System — Modification (Software Update)

EASA Airworthiness Directive 2022-0211 is an official regulatory update affecting Airbus A350-1041 aircraft. It mandates software updates to the Integrated Modular Avionics Core Processing Input Output Modules and the Primary Flight Control System to address potential structural integrity issues related to rudder oscillations.

Oct 17, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-1041

EASA AD 2022-0196

SUPERSEDED BY EASA AD 2024-0078

EASA Airworthiness Directive 2022-0196 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A350-941 and A350-1041 aeroplanes. It addresses the inspection and replacement of lower attachment studs, part number XP14-070-007800, in the aft galley complex to prevent potential galley module detachment. The directive applies to specific manufacturer serial numbers of these aircraft models.

Sep 20, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0186

Fuselage — Overhead Storage Compartment Crash Rods — Inspection

EASA Airworthiness Directive 2022-0186 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection of the overhead storage compartment crash rods to ensure their correct installation and structural integrity. The directive addresses a safety concern related to potential detachment of these crash rods during emergency landings.

Sep 13, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0183

Fuselage — Belly Fairing Upper Wing Panel Fasteners — Inspection

EASA Airworthiness Directive 2022-0183 is an airworthiness directive issued for Airbus A350-1041 aeroplanes. It mandates inspection of the belly fairing upper wing panel fasteners, specifically on access panels 195DT, 196DT, 195ET, and 196ET, to ensure the integrity of fasteners and prevent potential in-flight detachment. The directive addresses a safety concern related to missing or inappropriate fasteners that could affect aircraft control.

Aug 30, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-1041

EASA AD 2022-0157

Fuel — Engine / Auxiliary Power Unit Low Pressure Shut-Off Valves and Auxiliary Power Unit Isolation Valve — Inspection / Replacement

EASA Airworthiness Directive 2022-0157 is an airworthiness directive issued by EASA affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses potential fuel leakage risks associated with specific low pressure shut-off valves (LP SOV) and isolation shut-off valves (ISOV) on the engine and Auxiliary Power Unit (APU). The directive mandates inspection and replacement of affected valves to ensure continued airworthiness.

Aug 4, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0156

Pneumatic — Bleed Gimbals at Wing to Pylon Interfaces — Modification

EASA Airworthiness Directive 2022-0156 is an airworthiness directive addressing a welding quality issue in the bleed gimbals at the wing to pylon interfaces on Airbus A350-941 and A350-1041 aeroplanes. The affected parts include specific bleed duct assemblies and bleed gimbals with certain part numbers manufactured before week 51 of 2016. This directive mandates inspection and replacement of affected parts to prevent hot bleed air leakage and potential structural damage.

Aug 2, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0129

Engine — Front Engine Mount Support Structure — Inspection

EASA Airworthiness Directive 2022-0129 is an airworthiness directive addressing the inspection of the front engine mount support structure on Rolls-Royce Trent XWB series engines, including Trent XWB-75, Trent XWB-79, Trent XWB-79B, Trent XWB-84, and Trent XWB-97 models. These engines are commonly installed on Airbus A350 aircraft. The directive mandates inspections of the low pressure compressor outlet guide vane outer mount ring assembly to prevent potential engine mount failure.

Jun 30, 2022
Airworthiness DirectiveMaintenanceSafety MgmtRolls-Royce Deutschland Ltd & Co Kg TRENT XWBAirbus A350

EASA AD 2022-0127

SUPERSEDED BY EASA AD 2023-0157

EASA Airworthiness Directive 2022-0127 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with the Airbus A350 Airworthiness Limitations Section Part 4 Revision 07, which includes system equipment maintenance requirements and life limits for components. This directive ensures continued airworthiness by requiring operators to follow updated maintenance tasks and replacement schedules.

Jun 28, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0125

SUPERSEDED BY EASA AD 2024-0005

EASA Airworthiness Directive 2022-0125 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with the Airbus A350 Airworthiness Limitations Section (ALS) Part 2 Revision 08, which includes damage tolerant airworthiness limitation items essential for continued airworthiness. This directive ensures operators maintain updated maintenance tasks to prevent unsafe conditions.

Jun 28, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0124

SUPERSEDED BY EASA AD 2024-0189

EASA Airworthiness Directive 2022-0124 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with updated safe life airworthiness limitations as specified in Airbus A350 Airworthiness Limitations Section Part 1, Revision 07. This directive ensures continued airworthiness by requiring operators to adhere to the latest maintenance and replacement schedules for life-limited parts.

Jun 28, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0126

Time Limits / Maintenance Checks — Certification Maintenance Requirements — ALS Part 3 — Amendment

EASA Airworthiness Directive 2022-0126 is an amendment concerning the Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with the updated Airbus A350 Airworthiness Limitations Section (ALS) Part 3 Revision 07 for certification maintenance requirements. This directive ensures continued airworthiness by enforcing new and more restrictive maintenance tasks.

Jun 28, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0119

Air Conditioning — Forward Cargo Compartment Bracket Surface Protection — Modification

EASA Airworthiness Directive 2022-0119 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A350-941 and A350-1041 aeroplanes. It addresses the need for surface protection modification on specific aluminium brackets in the forward cargo compartment to prevent potential ducting rupture affecting cockpit air distribution. This directive applies to all manufacturer serial numbers except those with certain Airbus production modifications already embodied.

Jun 21, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0112

Oxygen — Passenger Oxygen Masks — Replacement

EASA Airworthiness Directive 2022-0112 is an airworthiness directive affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses an unsafe condition related to passenger oxygen masks, specifically the emergency passenger oxygen container assemblies that may have breathing bags prone to sticking after exposure to high temperatures. The directive mandates replacement and re-identification of affected passenger oxygen masks to ensure safety during depressurization events.

Jun 17, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0098

Aircraft Flight Manual — Section Limitations / Normal Procedures — Amendment; Flight Controls — Master Minimum Equipment List — Amendment / Primary Flight Control Computers — Modification (Software Update)

EASA Airworthiness Directive 2022-0098 is an amendment affecting Airbus A350-941 and A350-1041 aeroplanes equipped with certain flight control software standards. It addresses issues related to the primary flight control computers (PRIM) software that could lead to loss of elevator control. The directive mandates updates to the Aircraft Flight Manual, Master Minimum Equipment List, and installation of a software update to ensure continued safe operation.

Jun 1, 2022
Airworthiness DirectiveFlight OpsMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041