RegNotify

EASA Regulations for Airbus A350-941

126 airworthiness directives and regulations affecting Airbus A350-941.

EASA AD 2020-0090R1

SUPERSEDED BY EASA AD 2020-0203

EASA Airworthiness Directive 2020-0090R1 is an amendment addressing safety concerns on Airbus A350-941 and A350-1041 aeroplanes related to inadvertent liquid spillage on the ENG START panel or Electronic Centralized Aircraft Monitoring Control Panel. This directive mandates modifications and operational changes to prevent uncommanded engine in-flight shutdowns caused by liquid contamination. It applies to all affected A350 aircraft except those with specific water-resistant modifications.

Jul 21, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0139R1

SUPERSEDED BY EASA AD 2025-0073

EASA Airworthiness Directive 2020-0139R1 is an updated directive addressing the inspection and potential repair of horizontal tail plane lateral load fitting bushings on Airbus A350-941 and A350-1041 aeroplanes. It applies to all serial numbers except those with Airbus modifications 110669 or 114806 incorporated. The directive mandates repetitive detailed inspections and corrective actions to prevent structural failure due to bushing migration and associated corrosion or fatigue damage.

Jul 3, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0144

Doors — Forward and Aft Cargo Door Retaining Rings — Inspection

EASA Airworthiness Directive 2020-0144 is an airworthiness directive issued for Airbus A350-941 and A350-1041 aeroplanes. It mandates inspections of the forward and aft cargo door retaining rings to detect potential damage that could compromise structural integrity. The directive also provides an optional modification to terminate repetitive inspections.

Jun 29, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0123

SUPERSEDED BY EASA AD 2023-0068

EASA Airworthiness Directive 2020-0123 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes, except those with Airbus modification 109799 incorporated in production. The directive addresses an unsafe condition related to the rotation of certain fasteners in the centre wing box, which could lead to fuel vapour leakage inside the cabin. This directive mandates the replacement of affected fasteners with improved friction material fasteners to ensure continued airworthiness.

May 29, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2020-0109

Fuselage — Frame 98 Flange Feet between Stringers 15 and 17 — Inspection / Modification

EASA Airworthiness Directive 2020-0109 is an airworthiness directive issued by EASA affecting Airbus A350-941 aeroplanes, except those with Airbus modification 114295 incorporated in production. It mandates inspection and potential modification of the fuselage frame 98 flange feet between stringers 15 and 17 to ensure structural integrity. The directive addresses potential fatigue and damage tolerance issues in the rear cone of the fuselage.

May 15, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2020-0091

SUPERSEDED BY EASA AD 2021-0206

EASA Airworthiness Directive 2020-0091 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with updated safe life airworthiness limitations specified in the Airbus A350 Airworthiness Limitations Section Part 1, Revision 04 including Variation 4.3. The directive ensures continued airworthiness by requiring operators to adhere to new or more restrictive maintenance tasks and life limits for components.

Apr 22, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0071

Fuselage — Rear Cone Diagonal Struts — Inspection

EASA Airworthiness Directive 2020-0071 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A350-941 aeroplanes with specific manufacturer serial numbers. It mandates inspection of the fuselage rear cone diagonal struts located at frame 102 in section 19 to ensure proper locking of the diagonal struts. The directive aims to prevent potential structural integrity issues that could affect the horizontal tail plane attachments or rear cone joints.

Mar 25, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2020-0060

Exhaust — Pressure Relief Latch Access Doors — Modification

EASA Airworthiness Directive 2020-0060 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses a safety issue related to the pressure relief latch access doors and thrust reversers on these aircraft. The directive mandates modifications to improve thermal protection and prevent potential fire hazards.

Mar 16, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2020-0027R1

Flight Controls — Aileron, Elevator and Rudder Electro-Hydrostatic Actuators — Inspection / Replacement

EASA Airworthiness Directive 2020-0027R1 is an updated regulatory requirement addressing inspection and replacement of Electro-Hydrostatic Actuators (EHAs) for the aileron, elevator, and rudder flight controls on Airbus A350-941 and A350-1041 aircraft. The directive mandates insulation resistance checks and corrective actions for affected EHAs to ensure continued safe operation of these flight control components.

Feb 21, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0031

SUPERSEDED BY EASA AD 2022-0112

EASA Airworthiness Directive 2020-0031 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses an unsafe condition related to passenger oxygen masks that may stick and fail to fully inflate after exposure to high ground temperatures. The directive mandates replacement of affected passenger oxygen masks to ensure continued airworthiness.

Feb 18, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0028

Exhaust — Thrust Reverser Hinge Nut — Inspection / Replacement

EASA Airworthiness Directive 2020-0028 is an airworthiness directive addressing Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection and replacement of thrust reverser hinge nuts on both engines to ensure continued airworthiness and safety. The directive references Airbus Service Bulletin A350-78-P013 and Goodrich Service Bulletin RA35078-059 for detailed instructions.

Feb 14, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0020-E

SUPERSEDED BY EASA AD 2020-0090

EASA Airworthiness Directive 2020-0020-E is an emergency directive affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the risk of un-commanded engine in-flight shutdowns caused by liquid spillage on the ENG START panel or ECAM Control Panel in the flight deck. The directive mandates amendments to the Airbus A350 Airplane Flight Manual to include procedures for handling liquid spillage in the cockpit.

Feb 6, 2020
Airworthiness DirectiveFlight OpsSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0301

Flight Controls — Aileron and Elevator Electro-Hydrostatic Actuators — Modification Aircraft Flight Manual — Amendment

EASA Airworthiness Directive 2019-0301 is an amendment addressing flight control issues on Airbus A350-941 and A350-1041 aeroplanes. It focuses on the modification of electro-hydrostatic actuators (EHA) for inboard ailerons and elevators, specifically parts with P/N CA67001-025, CB36001-003, and CA67006-025. The directive mandates updates to the Aircraft Flight Manual and installation of modifications to ensure continued airworthiness.

Dec 12, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0288

SUPERSEDED BY EASA AD 2022-0126

EASA Airworthiness Directive 2019-0288 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with the Airbus A350 Airworthiness Limitations Section Part 3 Revision 05 and variation 5.3, which include certification maintenance requirements essential for continued airworthiness.

Nov 28, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0181R1

Fuselage — Forward and Aft Cargo Door Latch Fitting External Lugs — Inspection / Modification

EASA Airworthiness Directive 2019-0181R1 is an updated regulatory requirement affecting Airbus A350-941 aeroplanes, specifically addressing the forward and aft cargo door latch fitting external lugs. The directive mandates inspections and potential modifications to aluminium latch fittings to ensure structural integrity. It applies to all serial numbers except those with Airbus modifications 107020 and 107049 incorporated during production.

Nov 12, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2019-0265

Wings — Main Landing Gear Forward Pintle Bearing Lock Washer Tabs and Nuts — Inspection

EASA Airworthiness Directive 2019-0265 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspections of the main landing gear forward pintle bearing lock washer tabs and nuts to ensure proper installation and locking. The directive addresses a potential unsafe condition related to incorrect lock washer tab engagement that could lead to main landing gear collapse.

Oct 25, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0210

SUPERSEDED BY EASA AD 2024-0220

EASA Airworthiness Directive 2019-0210 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection of cabin oxygen containers and adjacent panel fasteners to ensure proper installation and prevent oxygen mask deployment failure. The directive applies to specific manufacturer serial numbers as listed in Airbus Alert Operators Transmission A35P015-19.

Aug 26, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0206

SUPERSEDED BY EASA AD 2021-0141

EASA Airworthiness Directive 2019-0206 is an airworthiness directive issued for Airbus A350-941 and A350-1041 aeroplanes, excluding those with certain production modifications. It addresses inspection and maintenance requirements for the trimmable horizontal stabilizer fittings and bearing assembly attachment interface to prevent potential corrosion and structural issues.

Aug 20, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0183

Electric and Electronic Common Installation — Cargo Lining Gutter Assemblies — Modification

EASA Airworthiness Directive 2019-0183 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It mandates a modification to the electric and electronic common installation, specifically the cargo lining gutter assemblies, to improve water drainage and prevent potential water spillage risks. This directive applies to all Airbus A350-941 aircraft except those with Airbus modification 111827 incorporated in production.

Jul 26, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2017-0129R1

Integrated Modular Avionics — Internal Timer — Power Cycle (Reset)

EASA Airworthiness Directive 2017-0129R1 is an updated regulatory document addressing a potential unsafe condition in Airbus A350-941 aeroplanes related to the Integrated Modular Avionics internal timer. It applies to all Airbus A350-941 aircraft except those with Airbus modifications 112312 and 112313 incorporated during production. The directive mandates repetitive power cycle resets to prevent loss of communication between avionics systems and network, which could lead to partial or total loss of avionics functions.

Jul 19, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941