RegNotify

EASA Regulations for Airbus A350-941

125 airworthiness directives and regulations affecting Airbus A350-941.

EASA AD 2022-0119

Air Conditioning — Forward Cargo Compartment Bracket Surface Protection — Modification

EASA Airworthiness Directive 2022-0119 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A350-941 and A350-1041 aeroplanes. It addresses the need for surface protection modification on specific aluminium brackets in the forward cargo compartment to prevent potential ducting rupture affecting cockpit air distribution. This directive applies to all manufacturer serial numbers except those with certain Airbus production modifications already embodied.

Jun 21, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0112

Oxygen — Passenger Oxygen Masks — Replacement

EASA Airworthiness Directive 2022-0112 is an airworthiness directive affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses an unsafe condition related to passenger oxygen masks, specifically the emergency passenger oxygen container assemblies that may have breathing bags prone to sticking after exposure to high temperatures. The directive mandates replacement and re-identification of affected passenger oxygen masks to ensure safety during depressurization events.

Jun 17, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0098

Aircraft Flight Manual — Section Limitations / Normal Procedures — Amendment; Flight Controls — Master Minimum Equipment List — Amendment / Primary Flight Control Computers — Modification (Software Update)

EASA Airworthiness Directive 2022-0098 is an amendment affecting Airbus A350-941 and A350-1041 aeroplanes equipped with certain flight control software standards. It addresses issues related to the primary flight control computers (PRIM) software that could lead to loss of elevator control. The directive mandates updates to the Aircraft Flight Manual, Master Minimum Equipment List, and installation of a software update to ensure continued safe operation.

Jun 1, 2022
Airworthiness DirectiveFlight OpsMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0093

Fuselage — Fasteners at Frame 96 Stringer 6 and 7 on Right Hand Side — Inspection

EASA Airworthiness Directive 2022-0093 is an airworthiness directive issued by EASA concerning Airbus A350-941 aeroplanes with specific manufacturer serial numbers. It addresses inspection requirements for fasteners located at frame 96, stringers 6 and 7 on the right-hand side of the fuselage to ensure structural integrity.

May 25, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2022-0088

Hydraulic Power — Yellow Fire Shut Off Valve Grounding Wiring — Modification

EASA Airworthiness Directive 2022-0088 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes with manufacturer serial numbers from 0006 to 0044 inclusive. The directive addresses a modification related to the hydraulic power system, specifically the grounding wiring of the yellow engine fire shut off valve. It mandates changes to ensure the safety and reliability of the engine fire shut off valve wiring.

May 17, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2022-0080

SUPERSEDED BY EASA AD 2024-0161

EASA Airworthiness Directive 2022-0080 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes with specific manufacturer serial numbers. The directive addresses an unsafe condition related to the centre wing box fasteners on these aircraft models. It mandates replacement of certain fasteners and the application of additional head nut cap protection to ensure continued airworthiness.

May 9, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0079-E

SUPERSEDED BY EASA AD 2022-0098

EASA Airworthiness Directive 2022-0079-E is an emergency directive affecting Airbus A350-941 and A350-1041 aeroplanes equipped with the Flight Control and Guidance System X13 standard. It addresses a fault in the primary flight control computers that could cause both elevator actuators to be incorrectly flagged as faulty, potentially leading to loss of elevator control. The directive mandates operational and dispatch restrictions to mitigate this risk.

May 5, 2022
Airworthiness DirectiveFlight OpsSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0065

Fire Protection — Engine Fire Extinguishing Pipes — Inspection

EASA Airworthiness Directive 2022-0065 is an airworthiness directive addressing the inspection of engine fire extinguishing pipes on Airbus A350-941 and A350-1041 aeroplanes equipped with certain Rolls-Royce TRENT XWB engines. The directive mandates a one-time detailed inspection of the engine core zone fire extinguishing pipes to detect and remove any protective caps that may have been inadvertently left installed. This AD applies to specific engine serial numbers and aims to ensure proper engine fire extinguishing capability.

Apr 7, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0054

Aircraft Flight Manual — Performance Database — Amendment

EASA Airworthiness Directive 2022-0054 is an amendment addressing Airbus A350-941 and A350-1041 aeroplanes. It mandates updates to the Aircraft Flight Manual (AFM) performance database to correct landing distance data following potential wiring damage caused by passenger floor crossbeam deflections during rapid decompression. This directive supersedes a previous AD and ensures continued safe operation of affected Airbus A350 models.

Mar 23, 2022
Airworthiness DirectiveFlight OpsSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0045

SUPERSEDED BY EASA AD 2022-0054

EASA Airworthiness Directive 2022-0045 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses a potential unsafe condition related to wiring damage caused by passenger floor crossbeam deflections during rapid decompression. The directive mandates updating the Airplane Flight Manual (AFM) performance database to reflect revised landing performance data.

Mar 16, 2022
Airworthiness DirectiveFlight OpsSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0031

Pneumatic — Overheat Detection System Sensing Elements — Inspection — Master Minimum Equipment List — Temporary Operational Restrictions

EASA Airworthiness Directive 2022-0031 addresses the inspection and operational restrictions related to the Pneumatic Overheat Detection System sensing elements installed on Airbus A350-941 and A350-1041 aeroplanes. The directive targets specific overheat detection system parts produced before 31 January 2021 that may fail to detect thermal bleed leaks. It mandates updates to the Master Minimum Equipment List and temporary operational restrictions until inspections and necessary replacements are completed.

Feb 25, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0015

Wings — Wing Upper and Lower Covers — Inspection / Repair

EASA Airworthiness Directive 2022-0015 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes with specific manufacturer serial numbers. The directive addresses inspection and repair requirements for the wing upper and lower covers due to potential missing Heavy Expanded Copper Foil (HECF) patches. This AD applies to certain Airbus A350 aircraft to ensure continued airworthiness and safety.

Jan 26, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0014

Equipment / Furnishings — Cockpit Seats — Inspection / Modification

EASA Airworthiness Directive 2022-0014 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A350-941 and A350-1041 aeroplanes. It addresses the inspection and modification requirements for cockpit seats, specifically the Captain, First Officer, and 3rd Occupant seats. The directive aims to ensure continued airworthiness by mitigating risks associated with potential seat failures.

Jan 25, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2022-0013

Equipment / furnishings — Escape Slide-Raft at Passenger Doors 3 — Inflatable Free Aisle Restrictor — Modification / Replacement

EASA Airworthiness Directive 2022-0013 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 aeroplanes. It addresses the escape slide-raft at passenger doors 3 equipped with the inflatable free aisle restrictor system. The directive mandates modification or replacement of specific affected escape slide-raft parts to ensure proper functionality during emergency evacuations.

Jan 25, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941

EASA AD 2022-0011

SUPERSEDED BY EASA AD 2022-0250

EASA Airworthiness Directive 2022-0011 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses issues related to the lightning strike edge glow sealant protection on the upper and lower wing skin cover edges to prevent potential ignition sources inside wing fuel tanks. The directive mandates inspections and modifications to ensure continued airworthiness and safety of the affected aircraft.

Jan 21, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2021-0275

Flight Controls — Slat Transmission Shafts / Slat Power Control Unit Torque Sensing Units — Inspection / Modification

EASA Airworthiness Directive 2021-0275 is an airworthiness directive addressing Airbus A350-941 and A350-1041 aeroplanes. It focuses on inspection and modification requirements for slat transmission shafts and slat power control unit torque sensing units, specifically targeting affected slat PCUs with part numbers 4785A0000-04 and 4785A0000-05. The directive aims to ensure continued safe operation by mandating inspections, health checks, and eventual replacement of affected parts.

Dec 10, 2021
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2021-0220

Flight Controls — Drive Struts on Flap Tracks 1 and 2 — Inspection / Replacement

EASA Airworthiness Directive 2021-0220 is an airworthiness directive issued by EASA affecting Airbus A350-941 and A350-1041 aeroplanes with specific manufacturer serial numbers. It addresses inspection and replacement requirements for drive struts on flap tracks 1 and 2 to ensure continued airworthiness. The directive mandates inspection of load-sensing drive struts and replacement of drive struts to prevent potential flap detachment.

Oct 1, 2021
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2021-0206

SUPERSEDED BY EASA AD 2022-0124

EASA Airworthiness Directive 2021-0206 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with updated safe life airworthiness limitations as specified in the Airbus A350 Airworthiness Limitations Section (ALS) Part 1, Revision 06. This directive ensures the continued airworthiness of these aircraft by enforcing replacement of life-limited parts and updating maintenance programs accordingly.

Sep 15, 2021
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2021-0207

SUPERSEDED BY EASA AD 2022-0125

EASA Airworthiness Directive 2021-0207 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with updated Damage Tolerant Airworthiness Limitation Items as specified in Airbus A350 Airworthiness Limitations Section (ALS) Part 2 Revision 07. This directive ensures continued airworthiness by requiring operators to follow new and more restrictive maintenance tasks.

Sep 15, 2021
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2021-0208

SUPERSEDED BY EASA AD 2022-0127

EASA Airworthiness Directive 2021-0208 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with updated maintenance requirements and life limits as specified in Airbus A350 Airworthiness Limitations Section Part 4 Revision 6 and Variation 6.1. This directive ensures the continued airworthiness of these aircraft by enforcing system equipment maintenance tasks and replacement of life-limited parts.

Sep 15, 2021
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041