RegNotify

EASA Regulations for Airbus A318

185 airworthiness directives and regulations affecting Airbus A318.

EASA AD 2023-0029

Equipment / Furnishings — Galley / Container End Stop — Replacement

EASA Airworthiness Directive 2023-0029 is issued for Airbus A318, A319, A320, and A321 aeroplanes equipped with certain affected galleys or stowage units. The directive addresses the replacement and modification of galley/container end stops and waste compartment doors to prevent potential failures that could lead to container detachment or release of waste bins during critical flight phases. This AD applies to various galley part numbers and serial numbers identified in the Aircraft Inspection Report.

Feb 1, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2023-0014

Doors — On-board Entrance Stairs / Motoreductor Units — Replacement

EASA Airworthiness Directive 2023-0014 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It addresses the replacement of specific motoreductor units installed on the on-board entrance stairs to ensure continued safe operation. The directive applies to motoreductor units with part numbers 4255417, 4394656, or 4339747 installed on these aircraft models.

Jan 18, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2023-0009

Fuselage — Cockpit Lateral Window Frames — Inspection

EASA Airworthiness Directive 2023-0009 mandates repetitive special detailed inspections of the cockpit lateral window frame vertical stiffeners on Airbus A318, A319, A320, and A321 aircraft, excluding certain modified configurations. The directive addresses potential cracks that could compromise fuselage structural integrity. It applies to all manufacturer serial numbers except those with specific Airbus modifications embodied in production or service.

Jan 16, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2023-0008

SUPERSEDED BY EASA AD 2024-0031

EASA Airworthiness Directive 2023-0008 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates compliance with updated airworthiness limitations related to damage tolerant items as specified in Airbus ALS Part 2 Variation 9.2. This directive ensures continued airworthiness by requiring operators to follow revised maintenance tasks and limitations.

Jan 16, 2023
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0266

Electric and Electronic Common Installation — Cockpit Panel Bracket — Inspection

EASA Airworthiness Directive 2022-0266 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates detailed inspections of the 10VU rack side fittings on cockpit panel brackets to detect cracks that could affect primary flight and navigation displays. The directive applies to all manufacturer serial numbers except those with Airbus modification 157335 embodied in production.

Dec 22, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2006-0135-CN

CANCELLED: Hydraulic Power — Ram Air Turbine — Speed Limitation

EASA Airworthiness Directive 2006-0135-CN is a cancellation notice affecting Airbus A318, A319, A320, and A321 aeroplanes equipped with Hamilton Sundstrand Ram Air Turbine (RAT) Part Numbers 762308, 762308A, or 766352. This document cancels the previous AD 2006-0135 which imposed speed limitations during flight tests with the RAT deployed due to a risk of RAT imbalance and potential structural damage. The cancellation reflects that all affected counterweights have been recovered and the original unsafe condition is no longer present.

Nov 23, 2022
Airworthiness DirectiveSafety MgmtMaintenanceAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0213R1

Doors — Passenger Door / External Handle Mechanism — Cleaning / Lubrication

EASA Airworthiness Directive 2022-0213R1 is an updated regulatory requirement addressing the cleaning and lubrication of the passenger door external handle mechanism on Airbus A318, A319, A320, and A321 aircraft. The directive targets specific affected doors where corrosion protection compound caused sticky mechanisms, potentially impairing door operation and emergency evacuation. This AD applies to all manufacturer serial numbers of the listed Airbus models.

Nov 8, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0147

SUPERSEDED BY EASA AD 2024-0196

EASA Airworthiness Directive 2022-0147 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It addresses potential defects in certain overheat detection system (OHDS) sensing elements manufactured before 31 January 2021, which may fail to detect thermal bleed leak events properly. The directive mandates inspection and possible replacement of these affected parts to ensure continued airworthiness.

Aug 17, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0032R1

SUPERSEDED BY EASA AD 2023-0093

EASA Airworthiness Directive 2022-0032R1 is an amendment addressing the braking and steering control units (BSCU) on Airbus A318, A319, A320, and A321 aeroplanes. It focuses on BSCUs with Part Number E21327307, which have shown failures leading to loss of anti-skid function, alternate braking mode, and nose wheel steering. The directive updates operational procedures and maintenance requirements to mitigate these risks.

Jul 29, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0151

SUPERSEDED BY EASA AD 2024-0068

EASA Airworthiness Directive 2022-0151 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspections of the horizontal upper stiffeners of the lateral cockpit window frame at fuselage frame 4 to detect cracks that could compromise fuselage structural integrity. The directive applies to specific Airbus models and serial numbers, excluding certain configurations with specific Airbus modifications.

Jul 26, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2017-0237R1

Flight Controls — Trimmable Horizontal Stabilizer Actuator — Modification

EASA Airworthiness Directive 2017-0237R1 is a regulatory update addressing the trimmable horizontal stabilizer actuator (THSA) on Airbus A318, A319, A320, and A321 aircraft. It focuses on modifications related to the Electrical Load Sensing Device (ELSD) installation and activation to ensure proper detection of primary load path failures in the THSA. This directive applies to all manufacturer serial numbers of the specified Airbus A320 Family models.

Jun 8, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0102

SUPERSEDED BY EASA 2024-0046

EASA Airworthiness Directive 2022-0102 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates compliance with updated airworthiness limitations and maintenance tasks specified in the Airbus Airworthiness Limitations Section Part 4 Revision 08. The directive ensures continued airworthiness by requiring replacement of life-limited parts and performance of maintenance tasks within specified intervals.

Jun 8, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0091

SUPERSEDED BY EASA AD 2024-0030

EASA Airworthiness Directive 2022-0091 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates compliance with updated maintenance tasks and airworthiness limitations as specified in the Airbus Airworthiness Limitations Section (ALS) Part 3 Revision 08. This directive ensures continued airworthiness by requiring operators to follow the latest approved maintenance program revisions.

May 20, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0236-CN

CANCELLED: Equipment / Furnishings — Emergency Escape Slide / Raft Inflation Reservoir — Pressure Check

EASA Airworthiness Directive Cancellation Notice 2020-0236-CN is a cancellation notice issued by the European Union Aviation Safety Agency for Airbus A318, A319, A320, and A321 aeroplanes. It addresses the emergency escape slide and raft inflation reservoir pressure check requirements previously mandated due to a manufacturing defect in rupture disk assemblies. The cancellation removes the need for repetitive pressure checks on affected parts following updated risk assessments and corrective actions by the manufacturer.

May 16, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0085

SUPERSEDED BY EASA AD 2024-0031

EASA Airworthiness Directive 2022-0085 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates compliance with updated airworthiness limitations related to damage tolerance maintenance tasks as specified in Airbus's Airworthiness Limitations Section Part 2 Revision 09. This directive applies to all serial numbers of the listed Airbus models and ensures continued safe operation through mandatory maintenance requirements.

May 12, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0082

SUPERSEDED BY EASA AD 2024-0066

EASA Airworthiness Directive 2022-0082 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates compliance with updated safe life airworthiness limitations as specified in Airbus's Airworthiness Limitations Section Part 1 Revision 08. This directive ensures the continued airworthiness of these aircraft models by enforcing maintenance and replacement tasks for life-limited components.

May 10, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD US-2022-04-08

Fire Protection / Doors — Cargo Door Seals — Replacement / Operational Limitation / Placard Installation

Federal Aviation Administration Airworthiness Directive 2022-04-08 is a final rule addressing Airbus SAS Model A318, A319, A320, and A321 series airplanes. It focuses on fire protection related to cargo door seals, specifically requiring replacement of certain forward and aft cargo compartment door seals and installation of placards. The directive also mandates operational limitations for certain routes via revisions to the airplane flight manual.

Mar 28, 2022
Airworthiness DirectiveMaintenanceSafety MgmtFlight OpsAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2022-0030

SUPERSEDED BY EASA AD 2024-0210

EASA Airworthiness Directive 2022-0030 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates repetitive special detailed inspections of the inner cap and web horizontal flange at frame 68 stringer 22 to detect cracks that could compromise fuselage structural integrity. The directive applies to specific Airbus models except those with certain production modifications or service bulletin embodiments.

Feb 25, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2021-0002R1

Stabilizers — Rudder — Inspection

EASA Airworthiness Directive 2021-0002R1 is an updated regulatory requirement addressing inspection and repair of rudders on Airbus A318, A319, A320, and A321 aircraft. It applies to rudders modified according to specific Airbus Service Bulletins and aims to ensure structural integrity by mandating inspections and corrective actions. The directive covers all manufacturer serial numbers of the affected aircraft models.

Feb 16, 2022
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2021-0279

Equipment / Furnishings — Doghouse Placard — Installation

The document titled Equipment / Furnishings — Doghouse Placard — Installation is a regulatory communication concerning the installation of doghouse placards on Airbus S.A.S. aircraft models A318, A319, A320, and A321. It addresses specific equipment and furnishing requirements related to these aircraft types. The document provides guidance on proper placard installation to ensure compliance with safety and operational standards.

Dec 15, 2021
OtherMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321