EASA Regulations for Gulfstream Aerospace Corporation GV

4 airworthiness directives and regulations affecting Gulfstream Aerospace Corporation GV.

EASA AD US-2021-26-02

NOT ADOPTED - EASA DECISION ATTACHED

The document titled NOT ADOPTED - EASA DECISION ATTACHED is an EASA decision regarding the suspension of adoption of FAA Airworthiness Directive 2021-26-02. This FAA AD applies to Gulfstream Aerospace Corporation Model GV and GV-SP aeroplanes and addresses the omission of a life limit for a main landing gear trunnion pin in the maintenance manual. EASA decided not to adopt the FAA AD due to more conservative life cycle limits required during their validation process for safe-life landing gear components.

Feb 7, 2023

Agency DecisionMaintenanceSafety MgmtGulfstream Aerospace Corporation GVGulfstream GVGulfstream GV-SP

EASA AD US-2023-02-02

NOT ADOPTED - EASA DECISION ATTACHED

The Federal Aviation Administration's Final Rule titled 'Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes' establishes a new airworthiness directive (AD 2023-02-02) applicable to all Gulfstream Model GV and GV-SP airplanes, including marketing designations G500, G550, and G500-5000. This directive addresses the omission of a life limit for the main landing gear (MLG) trunnion pin part number 1159SCL566-17 in the airworthiness limitations section of the maintenance manual.

Feb 7, 2023

Airworthiness DirectiveMaintenanceSafety MgmtGulfstream Aerospace Corporation GVGulfstream GVGulfstream GV-SP

EASA AD US-2022-16-04

[Correction] Stabilizers - Horizontal Stabilizer Lower Skin, Bonded Doublers and Stringers - Inspection / Repair

Correction to Airworthiness Directive 2022-16-04 issued by the Federal Aviation Administration (FAA) addresses inspection and repair of the horizontal stabilizer lower skin, bonded doublers, and stringers on Gulfstream Aerospace Corporation Model GV and GV-SP airplanes, including G500, G550, and G500-5000 variants. The correction fixes errors in revision levels and table references in the original directive's regulatory text without changing the substantive requirements.

Aug 30, 2022

Airworthiness DirectiveMaintenanceSafety MgmtGulfstream Aerospace Corporation GVGulfstream Aerospace Corporation GV-SPGulfstream Aerospace Corporation G500Gulfstream Aerospace Corporation G550Gulfstream Aerospace Corporation G500-5000

EASA AD US-2021-06-04

Fuselage - Floor Beam Support Link Lower Bushing - Inspection / Airworthiness Limitations Section Revision

The Federal Aviation Administration's Airworthiness Directive 2021-06-04 is a final rule addressing all Gulfstream Aerospace Corporation Model GV airplanes. It mandates inspections of the right butt line 6 floor beam inboard support links and bushings for corrosion to prevent potential failure. This directive responds to corrosion issues that could compromise the pressure vessel floor integrity and lead to loss of airplane pressurization.

Mar 31, 2021

Airworthiness DirectiveMaintenanceSafety MgmtGulfstream Aerospace Corporation GVGulfstream GV