EASA Regulations for Embraer ERJ 190

50 airworthiness directives and regulations affecting Embraer ERJ 190.

EASA AD BR-2012-08-03R1

Cockpit Door Passive Lock Striker - Quick Release Pin and Hinges / Replacement

EASA Airworthiness Directive BR-2012-08-03R1 is a Brazilian regulatory document issued by ANAC that mandates replacement of the cockpit door passive lock striker, quick-release pin, and hinges on specific Embraer ERJ 190 series aircraft models. It applies to ERJ 190-100 ECJ, STD, LR, IGW (except post-mod SB190-25-0270 freighter configuration), SR, and ERJ 190-200 STD, LR, and IGW airplanes as identified in Embraer Service Bulletins dated August 1, 2011. The directive aims to ensure continued airworthiness and safety of these aircraft by addressing a known issue with cockpit door hinges.

Jan 20, 2026

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2026-01-01

Engines Operation in Ground Freezing Fog - Operational Limitations Revision

The Brazilian Airworthiness Directive 2026-01-01 is a regulatory document issued by ANAC addressing operational limitations for Embraer ERJ190-300 and ERJ190-400 aircraft equipped with PW1900 family engines. It mandates restrictions on engine operation during ground freezing fog conditions to prevent compressor stalls in PW1100 engines. This directive aims to enhance flight safety by mitigating risks of multiple engine failures during critical flight phases.

Jan 9, 2026

Airworthiness DirectiveFlight OpsSafety MgmtEmbraer ERJ 190

EASA AD BR-2018-07-01R2

Landing Gear - Pintle Pins of the Main Landing Gear Shock Struts - Inspection

Brazilian Airworthiness Directive AD No. 2018-07-01R2 mandates inspection of the Pintle Pins on the Main Landing Gear Shock Struts for Embraer S.A. ERJ 190-100 and ERJ 190-200 series airplanes. This directive addresses corrosion and chromium layer chipping issues on the forward and rearward Pintle Pins that could lead to landing gear collapse during takeoff or landing. The AD requires detailed inspections and corrective actions as specified in Embraer Service Bulletin Nº 190-32-0065, revision 05.

Nov 27, 2025

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2025-10-01

Engine Feed Check Valve - Inspections / Functional Test

Brazilian Airworthiness Directive AD No. 2025-10-01 is issued by the Agência Nacional de Aviação Civil (ANAC) and applies to Embraer ERJ190-300 and ERJ190-400 aircraft equipped with Engine Feed Check Valve Part Number L85E38-003. The directive mandates inspections and functional tests of the engine feed check valves to address potential valve failures that could lead to engine flameout or fuel starvation. This AD ensures continued airworthiness and flight safety for affected aircraft registered in Brazil.

Oct 9, 2025

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190

EASA SIB BEA-2025-02

Fire Protection - Tube Replacement

The Special Airworthiness Bulletin BEA 2025-02 addresses corrosion issues found in the cargo compartment fire suppression system tubes of EMBRAER S.A. ERJ 190-400 aircraft. This bulletin provides information and recommendations regarding tube replacement to maintain fire protection system integrity. It is an informative bulletin and does not impose mandatory requirements or an Airworthiness Directive under RBAC 39.

Oct 9, 2025

Safety Information BulletinMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2020-01-02R3

[Correction] Nacelles / Pylons - Engine Inboard and Outboard Pylon Lower Link Lugs - Inspection / Repair

Brazilian Airworthiness Directive AD No. 2020-01-02R3 is a regulatory document issued by the Agência Nacional de Aviação Civil (ANAC) addressing inspection and repair requirements for engine inboard and outboard pylon lower link lugs on Embraer S.A. aircraft. The affected models include Embraer ERJ 170-100, ERJ 170-200, ERJ 190-100, ERJ 190-200, and ERJ 190-100 ECJ series airplanes. The directive mandates inspections, repairs, and modifications to prevent structural cracks that could compromise engine pylon integrity and aircraft safety.

Sep 23, 2025

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 170Embraer ERJ 190

EASA AD BR-E2025-07-03R1

SUPERSEDED BY ANAC BRAZIL AD 2025-10-01

Brazilian Emergency Airworthiness Directive E2025-07-03R1 is issued by the Agência Nacional de Aviação Civil (ANAC) and applies to Embraer ERJ190-300 and ERJ190-400 aircraft equipped with Engine Feed Check Valve Part Number L85E38-003. This directive mandates inspections and functional tests of the engine feed check valves to address potential valve failures that could lead to engine flameout or fuel starvation during flight.

Aug 4, 2025

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2025-07-02

Airworthiness Limitations - Revision of Maintenance or Inspection Program

Brazilian Airworthiness Directive AD No. 2025-07-02 is a regulatory document issued by the Agência Nacional de Aviação Civil (ANAC) that applies to Embraer S.A. ERJ-190-300 and ERJ-190-400 airplane models. It mandates revisions to the maintenance or inspection programs to incorporate updated airworthiness limitations, including Certification Maintenance Requirements, Airworthiness Limitation Inspections, Fuel System Limitation Items, and Life Limited Items.

Jul 22, 2025

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2025-04-02

Aircraft Flight Manual - Amendment

The Brazilian Airworthiness Directive AD No. 2025-04-02 is an amendment issued by the Agência Nacional de Aviação Civil (ANAC) that applies to all Embraer S.A. ERJ 190-300 and ERJ 190-400 aircraft. This directive mandates updates to the Aircraft Flight Manual (AFM) procedures related to AVIONICS MAU 1A and MAU 3B failures and requires a software update to the Brake Control Module (BCM).

Apr 22, 2025

Airworthiness DirectiveFlight OpsMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2025-01-01

Computerized Aeroplane Flight Manual Takeoff Calculation Module - Revision

Brazilian Airworthiness Directive AD No. 2025-01-01 is a regulatory document issued by the Agência Nacional de Aviação Civil (ANAC) that applies to Embraer ERJ 190-300 and ERJ 190-400 airplane models. It addresses an inconsistency in the Computerized Airplane Flight Manual (CAFM) Takeoff Calculation Module affecting these aircraft. The directive mandates updates to the Airplane Flight Manual to ensure accurate takeoff performance calculations.

Jan 20, 2025

Airworthiness DirectiveFlight OpsSafety MgmtEmbraer ERJ 190

EASA AD BR-2023-06-01R2

Flight Controls - Aileron Control System Backlash - Inspection

Brazilian Airworthiness Directive AD No. 2023-06-01R2 addresses the inspection and potential replacement of bearings and bushings in the aileron control system backlash on Embraer ERJ 190-300 aircraft. This directive mandates inspections following Embraer Service Bulletin 190E2-27-0027, revision 03, to ensure the aileron control system operates within certification limits and prevents excessive vibration. The AD applies to all Embraer ERJ 190-300 airplanes registered in Brazil.

Jan 3, 2025

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2023-05-02R2

Flight Controls - Aileron Control System Backlash - Inspection

The Brazilian Airworthiness Directive AD No. 2023-05-02R2 is an updated regulatory document issued by ANAC addressing the inspection and maintenance of the aileron control system backlash on Embraer ERJ 190-400 aircraft. It mandates inspections and potential replacement of wing aileron bearings and bushings to ensure compliance with safety standards and prevent excessive control system backlash.

Jan 3, 2025

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190

EASA SIB BEA-2024-08

Hydraulic Power - Inspection of Hydraulic Tube and Supports

The Special Airworthiness Bulletin BEA 2024-08 is an informative document addressing the inspection of hydraulic tubes and supports on EMBRAER S.A. ERJ 190-300 and ERJ 190-400 aircraft models. It alerts the civil aviation community to reported broken hydraulic line supports in the wing region, caused by incorrect torque application during production. The bulletin provides guidance but does not impose mandatory requirements or an Airworthiness Directive.

Dec 6, 2024

Safety Information BulletinMaintenanceSafety MgmtEmbraer ERJ 190

EASA SIB BEA-2024-06R1

New Software for Air Management System (AMS)

Special Airworthiness Bulletin BEA 2024-06R1 informs the civil aviation community about a new software update for the Air Management System (AMS) affecting EMBRAER ERJ 170-100, 170-200, 190-100, and 190-200 airplane models. The bulletin addresses a potential dual bleed failure scenario linked to previous AMS software versions prior to Black Label 17.0. It provides guidance to prevent this issue through software updates and monitoring procedures.

Dec 5, 2024

Safety Information BulletinMaintenanceSafety MgmtEmbraer ERJ 170Embraer ERJ 190

EASA SIB BEA-2024-05

Indicating/Recording Systems: Load 7.5 version for PRIMUS EPIC field-loadable software system

BEA 2024-05 is a Special Airworthiness Bulletin addressing the PRIMUS EPIC field-loadable software system Load 7.5 version for EMBRAER S.A. ERJ 190-300 and ERJ 190-400 airplanes. It informs the civil aviation community about improvements and fixes in this software version, including safety-related corrections. The bulletin is informative and does not impose mandatory requirements or an Airworthiness Directive under RBAC 39 at this time.

Sep 4, 2024

Safety Information BulletinMaintenanceSafety MgmtEmbraer ERJ 190

EASA AD BR-2024-08-01

SUPERSEDED BY ANAC BRAZIL AD 2025-04-02

Brazilian Airworthiness Directive 2024-08-01 is issued by the Agência Nacional de Aviação Civil (ANAC) and applies to all Embraer S.A. ERJ 190-300 and ERJ 190-400 aircraft, regardless of serial number. The directive addresses a critical failure in the MAU 3B and MAU 1A avionics units that can lead to loss of normal braking during landing, posing a safety risk. It mandates revisions to the Aircraft Flight Manual (AFM) procedures to mitigate this risk.

Aug 20, 2024

Airworthiness DirectiveFlight OpsSafety MgmtEmbraer ERJ 190Embraer ERJ 190-300Embraer ERJ 190-400

EASA AD BR-2024-07-01

Kidde Aerospace & Defense - Overheat Detection System Sensing Elements - Inspection

Brazilian Airworthiness Directive AD No. 2024-07-01 issued by ANAC mandates inspection and possible replacement of Kidde Aerospace & Defense Overheat Detection System sensing elements on Embraer ERJ 190-100 ECJ aircraft as identified in Embraer Service Bulletin 190LIN-36-0013 revision 03. The directive addresses defective sensing elements produced before January 31, 2021, which may fail to detect thermal bleed leaks and pose fire risks. It applies to all affected aircraft registered in Brazil.

Jul 29, 2024

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190Embraer ERJ 190-100 ECJ

EASA AD BR-2024-02-01

Kidde Aerospace & Defense - Overheat Detection System Sensing Elements - Inspection / Replacement

Brazilian Airworthiness Directive AD No. 2024-02-01 issued by the Agência Nacional de Aviação Civil (ANAC) mandates inspection and possible replacement of Kidde Aerospace & Defense Overheat Detection System (ODS) sensing elements on Embraer S.A. ERJ 190-300 and ERJ 190-400 aircraft. The directive addresses potential failures in ODS sensing elements produced before January 31, 2021, which could lead to undetected thermal bleed leaks and pose fire risks. It requires operators to inspect specific bleed lines and wing anti-ice and bleed system sensing elements to ensure flight safety.

Feb 5, 2024

Airworthiness DirectiveMaintenanceSafety MgmtEmbraer ERJ 190Embraer ERJ 190-300Embraer ERJ 190-400

EASA SIB BEA-2024-01

FFE Ltd: Fire Suppression — Toilet Compartment Fire Extinguishers

FFE Ltd: Fire Suppression — Toilet Compartment Fire Extinguishers is a Special Airworthiness Bulletin (BEA 2024-01) issued to inform owners and operators about inspection recommendations for certain Toilet Compartment Fire Extinguishers FE-36 installed on Embraer ERJ 170, ERJ 190, EMB-135, EMB-145, EMB-545, and EMB-550 aircraft. The bulletin addresses fire extinguishers manufactured by FFE Ltd. with specific part numbers and serial numbers produced before June 12, 2023. It highlights a potential manufacturing defect that may cause leakage and loss of fire suppression capability.

Jan 31, 2024

Safety Information BulletinMaintenanceSafety MgmtEmbraer EMB-545Embraer EMB-550Embraer EMB-135Embraer EMB-145Embraer ERJ 170Embraer ERJ 190

EASA AD BR-2023-01-01R1

Aeroplane Flight Manual - Section 2 Limitations - Amendment

The Brazilian Airworthiness Directive AD No. 2023-01-01R1 - EMBRAER / 39-1540 is an amendment issued by the Agência Nacional de Aviação Civil (ANAC) affecting Embraer S.A. airplanes models ERJ190-300 and ERJ 190-400. It addresses flight manual limitations related to stall warning system activation and angle of attack limiter engagement under certain gust conditions. This directive updates operational requirements to enhance flight safety for these aircraft.

Jan 18, 2024

Airworthiness DirectiveFlight OpsSafety MgmtEmbraer ERJ 190Embraer ERJ190-300Embraer ERJ190-400