RegNotify

EASA Regulations for Embraer EMB-505 (Phenom 300)

11 airworthiness directives and regulations affecting Embraer EMB-505 (Phenom 300).

EASA AD BR-2025-04-01

Stabilizers - Horizontal Stabilizer Backlash - Inspection / Replacement

Brazilian Airworthiness Directive AD No. 2025-04-01 issued by the Agência Nacional de Aviação Civil (ANAC) mandates inspection and possible replacement of horizontal stabilizer components on Embraer EMB-505 aircraft. The directive addresses potential invalid horizontal stabilizer backlash test results that could compromise flight safety. It requires compliance with Embraer Service Bulletin 505-27-0034, revision 02, dated December 6, 2024.

Apr 14, 2025
Airworthiness DirectiveMaintenanceSafety MgmtEmbraer EMB-505 (Phenom 300)

EASA AD BR-2023-02-01R3

Flight Controls - Aileron Autopilot Servo Mount Clutch Retaining Bolt - Replacement

Brazilian Airworthiness Directive AD No. 2023-02-01R3 is a regulatory document issued by the Agência Nacional de Aviação Civil (ANAC) that applies to all Embraer S.A. EMB-505 model airplanes. It mandates the replacement of the aileron autopilot servo mount clutch retaining bolt and washer to address corrosion issues that could impair aileron control and affect flight safety. The directive includes detailed compliance intervals and part numbers for replacement components.

Oct 25, 2024
Airworthiness DirectiveMaintenanceSafety MgmtEmbraer EMB-505 (Phenom 300)Embraer EMB-505

EASA AD BR-2023-05-03R2

Equipment / Furnishings - Monuments Structural Reinforcements / Replacement of Fasteners

Brazilian Airworthiness Directive AD No. 2023-05-03R02 is issued by the Agência Nacional de Aviação Civil (ANAC) and applies to Embraer S.A. EMB-505 aircraft as specified in Embraer Service Bulletin SB505-25-0046, revision 03. This directive mandates structural reinforcement installation on monuments and replacement of floor support fasteners to address safety concerns. The AD ensures compliance with Brazilian aviation regulations for all aircraft registered in Brazil.

May 17, 2024
Airworthiness DirectiveMaintenanceSafety MgmtEmbraer EMB-505 (Phenom 300)Embraer EMB-505

EASA AD BR-2023-07-01

[Correction] Equipment / Furnishings - Refreshment Center and Forward Cabinet - Modification

Brazilian Airworthiness Directive 2023-07-01 is an official correction and directive issued by the Agência Nacional de Aviação Civil (ANAC) affecting Embraer S.A. EMB-505 aircraft. It mandates the installation of structural reinforcements on the LH Refreshment Center and LH Forward Cabinet to ensure these components can withstand emergency landing loads. This directive applies to all EMB-505 airplanes as specified in Embraer Service Bulletin No. 505-25-0044.

Jan 25, 2024
Airworthiness DirectiveMaintenanceSafety MgmtEmbraer EMB-505 (Phenom 300)Embraer EMB-505

EASA AD BR-2023-04-01

Garmin G3000 Avionics System - Software Update

Brazilian Airworthiness Directive AD No. 2023-04-01 is a regulatory document issued by the Agência Nacional de Aviação Civil (ANAC) that applies to Embraer EMB-505 aircraft equipped with the Garmin G3000 avionics system. The directive mandates a software update to address an issue with inadvertent barometric pressure setting changes affecting the altimeter readings on the Primary Flight Displays. This update is essential for maintaining safe flight operations and compliance with Brazilian aviation regulations.

Apr 4, 2023
Airworthiness DirectiveMaintenanceSafety MgmtEmbraer EMB-505 (Phenom 300)Embraer EMB-505

EASA SIB BEA-2023-01

Rotary Switches Pull-to-Turn Feature inspection

The Special Airworthiness Bulletin BEA Nº 2023-01 provides guidance on inspecting the pull-to-turn feature of rotary switches on various Embraer aircraft models, including EMB-135/145, EMB-390 KC, EMB-500/505, EMB-545/550, and ERJ-170/190 families. This bulletin is informative and not mandatory, addressing concerns about the functionality of the pull-to-turn feature on switches such as Fuel Pump Power and APU Control Master. It aims to ensure the proper operation of these switches to prevent inadvertent activation or deactivation of critical systems.

Feb 27, 2023
Safety Information BulletinMaintenanceSafety MgmtEmbraer EMB-500 (Phenom 100)Embraer EMB-505 (Phenom 300)Embraer EMB-545Embraer EMB-550Embraer EMB-135Embraer EMB-145Embraer ERJ 170Embraer ERJ 190

EASA AD BR-2020-09-01

Stabilizers - Control Surface Mass-balance Weights and Attachments - Inspection / Replacement

Brazilian Airworthiness Directive 2020-09-01 is an official regulatory document issued by the Agência Nacional de Aviação Civil (ANAC) applicable to all Embraer EMB-505 airplanes. It mandates inspection, cleaning, weighting, and replacement of mass-balance weights and attachments on stabilizers' control surfaces including elevators, ailerons, and rudder to address corrosion issues. The directive also requires updating the approved maintenance or inspection program to include these tasks as airworthiness limitations.

Sep 7, 2020
Airworthiness DirectiveMaintenanceSafety MgmtEmbraer EMB-505 (Phenom 300)Embraer EMB-505

EASA AD BR-2020-05-03

Aircraft Flight Manual - Operational Envelope Temperature / Minimum Airspeed Limitation - Amendment

The Aircraft Flight Manual - Operational Envelope Temperature / Minimum Airspeed Limitation - Amendment is a Brazilian Airworthiness Directive (AD No. 2020-05-03) issued by ANAC that applies to Embraer EMB-500 and EMB-505 aircraft equipped with PW617F-E, PW617F1-E, or PW535E engines. It addresses operational limitations related to static air temperatures below -54°C to ensure safe aircraft operation within the approved flight envelope.

Jun 2, 2020
Airworthiness DirectiveFlight OpsSafety MgmtEmbraer EMB-500 (Phenom 100)Embraer EMB-505 (Phenom 300)Embraer EMB-500Embraer EMB-505

EASA AD BR-2020-01-01

SUPERSEDED BY ANAC AD 2020-09-01

Brazilian Emergency Airworthiness Directive EAD No. 2020-01-01 is issued by the Agência Nacional de Aviação Civil (ANAC) and applies to all Embraer EMB-505 aircraft, regardless of serial number. This directive addresses corrosion issues found in the mass-balance weights of control surfaces including elevators, ailerons, and rudder. It mandates inspections, replacements as necessary, and updates to maintenance programs to ensure continued airworthiness and flight safety.

Jan 10, 2020
Airworthiness DirectiveMaintenanceSafety MgmtEmbraer EMB-505 (Phenom 300)Embraer EMB-505

EASA AD BR-2019-11-06

SUPERSEDED BY ANAC BRAZIL EMERGENCY AD 2019-11-08

SUPERSEDED BY ANAC BRAZIL EMERGENCY AD 2019-11-08 is a regulatory document indicating that the current directive has been replaced by the ANAC Brazil Emergency Airworthiness Directive issued on November 8, 2019. The document does not provide specific details about affected aircraft, engines, or parts due to corrupted content. It serves as a notice of supersession rather than a standalone directive.

Nov 11, 2019
Airworthiness DirectiveSafety MgmtEmbraer EMB-505 (Phenom 300)