RegNotify

EASA Regulations for Dassault Falcon 7X

37 airworthiness directives and regulations affecting Dassault Falcon 7X.

EASA AD 26-028

Air Conditioning — Air Conditioning Pack — Inspection

EASA Airworthiness Directive 26-028 is a proposed directive addressing the inspection of the air conditioning pack exhaust plenum on Dassault Aviation Falcon 7X aeroplanes, including those modified to Falcon 8X standard. The directive targets specific exhaust plenum parts with Part Numbers 6112C020 and 6146C770 due to reported damage. It mandates inspections to ensure the structural integrity of the affected components.

Feb 11, 2026
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2025-0228R1

Standard Practices and Structures — DECOMATIC Titanium Bolts — Replacement

EASA Airworthiness Directive 2025-0228R1 addresses the replacement of DECOMATIC titanium bolts used in the standard practices and structures of Dassault Aviation Falcon 2000, Falcon 7X, and Falcon 900EX aircraft. This directive focuses on ensuring the continued airworthiness and structural integrity of these aircraft models by mandating specific bolt replacements. It applies directly to operators and maintenance organizations responsible for these Dassault Falcon aircraft types.

Feb 6, 2026
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 2000Dassault Falcon 7XDassault Falcon 900EX

EASA AD 2026-0016

Flight Controls — Spoiler Electrical Control Unit — Replacement

EASA Airworthiness Directive 2026-0016 is an official regulatory document addressing the replacement of the Spoiler Electrical Control Unit (SPECU) on Dassault Aviation Falcon 7X aeroplanes, including those modified to Falcon 8X standard. The directive mandates the replacement of certain affected SPECUs to prevent hydraulic leakage and potential fire hazards. It applies to all serial numbers of Falcon 7X aircraft and specifies compliance requirements for operators.

Jan 26, 2026
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2025-0229

Time Limits / Maintenance Checks — Airworthiness Limitations Section — Amendment

EASA Airworthiness Directive 2025-0229 is an amendment concerning the Dassault Aviation Falcon 7X aeroplanes, including those modified with Dassault modification M1000 (Falcon 8X). It updates the Airworthiness Limitations Section (ALS) of the maintenance manual, specifically Chapter 5-40 (DGT 107838) Revision 14, to ensure continued airworthiness through mandatory maintenance tasks and life limit replacements.

Oct 20, 2025
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2025-0200

[Correction] Equipment / Furnishings — Passenger Seats — Modification

EASA Airworthiness Directive 2025-0200 is a correction issued by the European Union Aviation Safety Agency addressing passenger seat modifications on Dassault Aviation Mystère-Falcon 900, Falcon 900EX, Falcon 2000, Falcon 2000EX, and Falcon 7X aeroplanes. The directive targets specific single and double seat assemblies identified by part and serial numbers that have exhibited unsafe sliding without passenger input. It mandates modification or replacement of affected seats to ensure continued airworthiness and passenger safety.

Sep 30, 2025
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 2000Dassault Falcon 7XDassault Falcon 900EXDassault Mystère-Falcon 900

EASA AD 2025-0134

Equipment / Furnishings — Passenger Seats — Inspection

EASA Airworthiness Directive 2025-0134 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Dassault Aviation Falcon 900EX, Falcon 2000EX, Falcon 7X, and Falcon 6X aeroplanes. It addresses inspection requirements for certain B/E Aerospace UCT passenger seats with specific part numbers and serial numbers to ensure seat locking mechanisms function correctly. The directive mandates a one-time inspection and corrective actions to prevent seats from sliding unexpectedly during flight.

Jun 26, 2025
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 2000Dassault Falcon 6XDassault Falcon 7XDassault Falcon 900EX

EASA AD 2025-0122

SUPERSEDED BY EASA AD 2025-0229

EASA Airworthiness Directive 2025-0122 is issued for Dassault Aviation Falcon 7X aeroplanes, including those with the Falcon 8X modification. This directive mandates compliance with updated airworthiness limitations as specified in the Dassault Falcon 7X Maintenance Manual, Airworthiness Limitations Chapter 5-40, Revision 13. It ensures continued airworthiness by enforcing maintenance tasks and life limits on components.

May 28, 2025
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2025-0092

Flight Controls — Maintenance and Avionics Interface Computer Software — Modification / Airplane Flight Manual — Amendment

EASA Airworthiness Directive 2025-0092 is an airworthiness directive affecting Dassault Aviation Falcon 7X aeroplanes that have embodied modification M1000, also known as Falcon 8X. This directive mandates modifications to the flight controls maintenance and avionics interface computer software, along with amendments to the Airplane Flight Manual. The directive aims to enhance safety by addressing issues related to the inboard slats extension system during landing.

Apr 23, 2025
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2024-0224

SUPERSEDED BY EASA AD 2026-0016

EASA Airworthiness Directive 2024-0224 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Dassault Aviation Falcon 7X aeroplanes, including those modified to Falcon 8X standard. It addresses issues related to the Spoiler Electrical Control Unit (SPECU) with Part Number 051243-01, which may cause hydraulic leakage and potential fire hazards. The directive mandates replacement of affected SPECUs to ensure continued airworthiness and safety.

Nov 26, 2024
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2023-0003R1

Navigation — EASy Avionics Architecture / Modification; Aircraft Flight Manual — Amendment; Master Minimum Equipment List — Implementation; Operational Suitability Manual — Flight Crew — Implementation

EASA Airworthiness Directive 2023-0003R1 is an updated regulatory document addressing the Falcon 7X aeroplanes equipped with the EASy avionics architecture. It mandates modifications to the aircraft flight manual, implementation of the Master Minimum Equipment List, and updates to the Operational Suitability Manual for flight crews to enhance avionics reliability and safety. The directive applies to all Falcon 7X aircraft except those with certain later avionics modifications embodied in production.

Sep 26, 2024
Airworthiness DirectiveFlight OpsMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2024-0076

Wings — Ailerons — Inspection

EASA Airworthiness Directive 2024-0076 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Dassault Aviation Falcon 7X aeroplanes, including those modified as Falcon 8X. It mandates inspections of specific ailerons identified by part numbers and serial numbers to detect excessive trailing edge thickness that could compromise structural integrity. The directive provides detailed inspection and corrective action instructions based on Dassault Service Bulletins 7X-593 Revision 2 and 7X-594 Revision 1.

Mar 19, 2024
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7XDassault Falcon 8X

EASA AD 2024-0072

Information Systems — Electronic Display Unit — Replacement

EASA Airworthiness Directive 2024-0072 is an airworthiness directive addressing the replacement of electronic display units (EDU) on Dassault Aviation Falcon 900EX, Falcon 2000EX, and Falcon 7X aircraft. The directive targets CMA-1310 EDUs with specific part numbers and modification statuses that have been found to have lithium-polymer battery swelling issues. It mandates replacement with modified units to ensure continued safe operation.

Mar 15, 2024
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 2000Dassault Falcon 7XDassault Falcon 900EXDassault Falcon 2000EX

EASA AD 2024-0021

SUPERSEDED BY EASA AD 2024-0076

EASA Airworthiness Directive 2024-0021 is issued for Dassault Aviation Falcon 7X aeroplanes, including those modified as Falcon 8X in production. It mandates inspection of specific ailerons with certain part numbers and serial numbers due to potential excessive trailing edge thickness that could compromise structural integrity. The directive provides detailed inspection and corrective action instructions based on Dassault Service Bulletins 7X-593 Revision 1 and 7X-594.

Jan 17, 2024
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7XDassault Falcon 8X

EASA AD 2023-0216

Pneumatic — Bleed Air Leak Detectors — Operational Check

EASA Airworthiness Directive 2023-0216 is an operational check requirement for the bleed air leak detectors installed on Dassault Aviation Falcon 7X and Falcon 8X aeroplanes. It specifically addresses left-hand and right-hand pylon Bleed Air Leak Detectors with part numbers 04-90022-9100C and 04-90022-9250C. The directive mandates inspection and possible replacement of affected parts to ensure continued airworthiness.

Dec 18, 2023
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7XDassault Falcon 8X

EASA AD 2023-0208

Power Plant Mounts — Yoke Washer — Replacement

EASA Airworthiness Directive 2023-0208 is an airworthiness directive affecting Dassault Aviation Falcon 7X aeroplanes, including Falcon 8X models with specific manufacturer serial numbers. It addresses the replacement of double countersink washers installed on engine 1 and engine 3 forward yokes. The directive mandates inspection and potential replacement of these washers to ensure continued airworthiness.

Nov 22, 2023
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7XDassault Falcon 8X

EASA AD 2023-0207

SUPERSEDED BY EASA AD 2025-0228

EASA Airworthiness Directive 2023-0207 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Dassault Aviation Falcon 7X, Falcon 900EX, and Falcon 2000EX aeroplanes. It addresses the replacement of certain Decomatic Titanium bolts that were improperly heat treated during manufacturing, potentially compromising structural integrity. The directive applies to specific serial numbers of these aircraft models, including variants known as Falcon 8X, F900LX, F2000LXS, and F2000S.

Nov 21, 2023
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 2000Dassault Falcon 7XDassault Falcon 900EXDassault Falcon 2000EXDassault Falcon 8XDassault Falcon F900LXDassault Falcon F2000LXSDassault Falcon F2000S

EASA AD 2023-0063

SUPERSEDED BY EASA AD 2024-0033

EASA Airworthiness Directive 2023-0063 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Dassault Aviation Falcon 7X aeroplanes, including those modified with Dassault modification M1000 (Falcon 8X). It mandates compliance with updated airworthiness limitations and maintenance tasks as specified in the Dassault Falcon 7X Aircraft Maintenance Manual, Airworthiness Limitations Section, Revision 11. The directive ensures continued airworthiness by enforcing replacement of life-limited parts and adherence to maintenance intervals.

Mar 20, 2023
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X

EASA AD 2022-0161-E

Aeroplane Flight Manual — Amendment

EASA Airworthiness Directive 2022-0161-E is an emergency directive affecting Dassault Aviation Falcon 7X aeroplanes, including those modified to Falcon 8X standard. It mandates an amendment to the Aeroplane Flight Manual to address a potential unsafe condition related to the inboard slats during landing. The directive ensures flight crews are informed and can safely operate the aircraft despite the slats possibly remaining retracted.

Aug 4, 2022
Airworthiness DirectiveFlight OpsSafety MgmtDassault Falcon 7XDassault Falcon 8X

EASA AD 2022-0145

SUPERSEDED BY EASA AD 2023-0003

EASA Airworthiness Directive 2022-0145 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Dassault Aviation Falcon 7X aeroplanes, including those modified to Falcon 8X standard except those with mod M2091. It addresses a potential unsafe condition in the Falcon 7X EASy avionics architecture that could lead to misleading data on display units and increased pilot workload.

Jul 12, 2022
Airworthiness DirectiveSafety MgmtMaintenanceDassault Falcon 7XDassault Falcon 8X

EASA AD 2022-0142

SUPERSEDED BY EASA AD 2023-0063

EASA Airworthiness Directive 2022-0142 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Dassault Aviation Falcon 7X aeroplanes, including those modified to Falcon 8X standard. It mandates compliance with updated airworthiness limitations specified in the Dassault Falcon 7X Aircraft Maintenance Manual, Airworthiness Limitations Section, Revision 10. The directive ensures continued airworthiness by enforcing maintenance tasks and life limits for components.

Jul 7, 2022
Airworthiness DirectiveMaintenanceSafety MgmtDassault Falcon 7X