Sign in Create account

EASA Regulations for Boeing 737-700C

27 airworthiness directives and regulations affecting Boeing 737-700C.

Get the next one by email

New ADs and bulletins for Boeing 737-700C, summarized like the ones below, every Monday.

EASA AD US-2024-06-01

Fuselage - Skin and Bear Strap at the Forward Galley Door Cutout - Inspection

Federal Aviation Administration Airworthiness Directive 2024-06-01 is a final rule addressing certain Boeing 737-600, -700, -700C, -800, -900, and -900ER airplanes. It mandates inspections of the fuselage skin and bear strap at the forward galley door cutout forward upper corner due to reported cracks caused by high operating stresses. The directive aims to ensure structural integrity and prevent potential rapid decompression.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2023-13-05

Fuselage - Skin Lap Splices - Inspection / Repair

The Federal Aviation Administration's Airworthiness Directive 2023-13-05 addresses fuselage skin lap splice cracking on all Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This directive requires inspections and repairs of specific skin lap splice areas at stations S-4, S-14, and S-24 to detect and mitigate cracking, buckling, wrinkling, or bulging. The AD aims to maintain the structural integrity of these aircraft by preventing fatigue-related damage in critical fuselage areas.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2023-09-04

Superseded by FAA AD 2025-25-04

FAA Airworthiness Directive 2023-09-04 is a final rule addressing certain Boeing 737-600, -700, -700C, -800, -900, -900ER series airplanes, and certain 737-8 and -9 models. It targets uncommanded escape slide deployments caused by excessive tension in the inflation cable and movement of the escape slide assembly within its compartment. The directive mandates inspection of all escape slide assemblies to identify affected parts and requires corrective actions as necessary.

Airworthiness Directive

Boeing 737600700700C800900900ER89

EASA AD US-2023-06-15

Fuselage - Left and Right Side Station 727 Frame Inner Chord and S—18A Web - Inspection

Fuselage - Left and Right Side Station 727 Frame Inner Chord and S–18A Web - Inspection is a Federal Aviation Administration (FAA) Airworthiness Directive (AD 2023–06–15) addressing certain Boeing 737–600, –700, –700C, –800, –900, and –900ER series airplanes. This AD mandates inspections of the left and right sides at station 727 frame inner chord and S–18A web for missing or incorrect shims, fastener issues, and cracking. It aims to ensure structural integrity by detecting and repairing fatigue cracks before they become critical.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2023-04-17

Fuel - Auxiliary Power Unit Fuel Line Shroud / Pressure Switch Wire Clamp - Inspection

The Federal Aviation Administration's Airworthiness Directive 2023-04-17 is a final rule addressing certain Boeing 737-8, 737-9, and 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates inspections of the auxiliary power unit (APU) fuel line shroud and the pressure switch wire clamp assembly to detect damage and incorrect fastener installation that could cause interference and potential fuel leaks. This directive aims to prevent flammable fluid leaks in ignition zones due to damaged APU fuel line shrouds.

Airworthiness Directive

Boeing 73789600700700C800900900ER

EASA AD US-2022-18-13

Fuselage - Aft Pressure Bulkhead - Inspection

Airworthiness Directive 2022-18-13 is a final rule issued by the Federal Aviation Administration (FAA) addressing certain Boeing 737-600, -700, -700C, -800, and -900 series airplanes. It mandates inspections and repairs of the aft pressure bulkhead center dome apex web lap splices due to susceptibility to widespread fatigue damage. The directive requires visual and eddy current inspections and corrective actions to maintain structural integrity.

Airworthiness Directive

Boeing 737600700700C800900

EASA AD US-2021-26-17

Equipment / Furnishings - Passenger Service Units and Life Vest Panels - Inspection / Modification

Airworthiness Directive 2021-26-17 is a final rule issued by the FAA addressing certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes without Boeing Sky Interior. It supersedes AD 2019-03-26 and focuses on inspection and modification of passenger service units (PSUs) and life vest panels to ensure correct lanyard assemblies and proper part number re-identification. The directive aims to prevent PSUs and life vest panels from detaching, which could cause passenger injuries and hinder evacuation.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2021-18-17

Auto Flight - Operational Program Software - Inspection

Airworthiness Directive 2021-18-17 is a final rule issued by the Federal Aviation Administration addressing certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It requires inspection and potential updating of the operational program software (OPS) of the flight control computers (FCCs) to correct issues with autopilot coupled instrument landing system (ILS) approaches where the airplane may not capture or track the glideslope correctly.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2021-21-09

Fuselage - Aft Pressure Bulkhead - Repetitive Inspections

The Federal Register document titled 'Fuselage - Aft Pressure Bulkhead - Repetitive Inspections' is a final rule Airworthiness Directive (AD 2021-21-09) issued by the FAA affecting The Boeing Company Model 737-600, -700, -700C, -800, and -900 series airplanes. This directive mandates repetitive inspections for cracking in the webs of the aft pressure bulkhead and corrective actions if necessary. It also includes inspections for existing repairs on newly included airplanes to ensure continued airworthiness.

Airworthiness Directive

Boeing 737600700700C800900

EASA AD US-2021-11-24

Fuel - Maintenance or Inspection Program - Revision

The Federal Aviation Administration's Final Rule titled 'Fuel - Maintenance or Inspection Program - Revision' is an airworthiness directive (AD 2021-11-24) applicable to certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This directive addresses updated airworthiness limitations related to fuel tank ignition prevention and the nitrogen generation system (NGS).

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2021-09-06

Superseded by FAA AD 2025-07-03

FAA Airworthiness Directive 2021-09-06 is a final rule superseding AD 2019-22-10 and applies to all Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It addresses cracking issues in the left- and right-hand side outboard chords of frame fittings and failsafe straps near station 663.75. The directive mandates repetitive inspections and repairs to ensure structural integrity and safety.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2021-08-04

Oxygen - Oxygen Mask Stowage Box Unit - Inspection / Replacement

Airworthiness Directive 2021-08-04 is a final rule issued by the Federal Aviation Administration addressing crew oxygen mask stowage box units on certain Boeing airplanes, including Model 737-700, -700C, -800, -900ER, Model 747-400F, and Model 767-200 and -300 series. The directive requires inspections and possible replacement or re-identification of affected oxygen mask stowage box units to prevent potential ignition sources or valve jams. This AD expands the applicability beyond the original scope of AD 2013-07-09 to include additional airplane models.

Airworthiness Directive

Boeing 737700700C800900ER
Boeing 747400F
Boeing 757
Boeing 767200300

EASA AD US-2021-02-14

Fuel - Side of Body Slot - Inspection

Federal Register Volume 86, Number 34 (February 23, 2021) is a final rule airworthiness directive issued by the FAA addressing certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. The directive mandates inspection of the side of body (SOB) slot for insufficient sealant due to unclear production drawing instructions, which could lead to fuel leaks and potential fire hazards. It requires a general visual inspection and corrective actions to ensure safety.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2021-02-13

Fuselage - Forward Galley Door Fuselage Skin / Bear Strap - Inspection

The Federal Aviation Administration's Airworthiness Directive 2021-02-13 is a final rule addressing certain Boeing 737-600, -700, -700C, -800, and -900 series airplanes. It mandates inspections of the fuselage skin and bear strap at the forward galley door area for cracks, prompted by reports of cracking in the bear strap between station 290 and 296. The directive aims to prevent potential structural integrity loss and uncontrolled decompression.

Airworthiness Directive

Boeing 737600700700C800900

EASA AD US-2020-18-13

NOT ADOPTED - EASA DECISION ATTACHED

The document titled NOT ADOPTED - EASA DECISION ATTACHED is a Federal Aviation Administration (FAA) final rule airworthiness directive (AD 2020-18-13) addressing certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates modifications to the fuel quantity indicating system (FQIS) to prevent ignition sources inside the center fuel tank caused by electrical faults. The directive also includes alternative actions for cargo-configured airplanes to mitigate the risk of fuel tank explosions.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2020-16-51

[Final Rule] Pneumatic - Engine Bleed Stage 5 Check Valves - Inspection

The Final Rule titled 'Pneumatic - Engine Bleed Stage 5 Check Valves - Inspection' is an airworthiness directive issued by the FAA for all Boeing 737-300, -400, -500, -600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates inspections and, if necessary, replacement of the engine bleed air 5th stage check valves on each engine due to reports of valves stuck open causing single-engine shutdowns. This directive addresses a critical safety risk related to potential dual-engine power loss.

Airworthiness Directive

Boeing 737300400500600700700C800900900ER

EASA AD US-2020-03-20

Superseded by FAA AD 2025-02-07

FAA Airworthiness Directive 2020-03-20 is a final rule addressing certain Boeing aircraft models including MD-11, MD-11F, 717-200, all 737-8 and 737-9, all 737-600/-700/-700C/-800/-900/-900ER series, certain 747-400 and 747-400F, certain 757 and 767, and all 777 airplanes. This directive requires revising the airplane flight manual to prohibit operations requiring less than 0.3 required navigational performance (RNP) within a specified geographic area for airplanes equipped with a Collins GLU-2100 multi-mode receiver (MMR) with certain software versions. The AD was issued due to reports of loss or degradation of GPS data affecting positional accuracy.

Airworthiness Directive

Boeing 717200
Boeing 73789600700700C800900900ER
Boeing 747400400F
Boeing 757
Boeing 767
Boeing 777
Boeing MD-11
McDonnell Douglas MD-11
McDonnell Douglas MD-11F

EASA AD US-2019-22-10

Superseded by FAA AD 2021-09-06

FAA Airworthiness Directive 2019-22-10 is a final rule affecting all Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates expanded repetitive inspections for cracking in the left- and right-hand side outboard chords of frame fittings and failsafe straps at station 663.75, around eight fasteners adjacent to stringer S-18A straps. This directive addresses structural integrity concerns to prevent potential loss of airplane control.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2019-20-02

Superseded by FAA AD 2019-22-10

FAA Airworthiness Directive 2019-20-02 is a final rule addressing all Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates repetitive inspections for cracking in the left and right side outboard chords of the station 663.75 frame fittings and failsafe straps adjacent to stringer S-18A straps, with required repairs if cracking is found. This directive aims to maintain structural integrity and prevent potential loss of airplane control.

Airworthiness Directive

Boeing 737600700700C800900900ER

EASA AD US-2019-11-06

Fuselage - Skin under the Drag Link Assembly - Inspection

Federal Aviation Administration Airworthiness Directive 2019-11-06 is a final rule addressing certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates repetitive inspections of the fuselage skin under the drag link assembly for cracks at specific fastener locations. The directive aims to ensure continued airworthiness by detecting and correcting skin cracks that could compromise structural integrity.

Airworthiness Directive

Boeing 737600700700C800900900ER