EASA Regulations for Boeing 737-700C

27 airworthiness directives and regulations affecting Boeing 737-700C.

EASA AD US-2019-11-03

Flight Controls - Main Slat Track Assemblies - Identification / Replacement

Federal Aviation Administration Airworthiness Directive 2019-11-03 is a final rule addressing certain Boeing 737-700C, -800, and -900ER series airplanes. It mandates inspection and maintenance record checks of main slat track assemblies to identify those affected by hydrogen embrittlement due to incorrect manufacturing. The directive aims to prevent potential failure of the main slat track assemblies that could lead to slat departure and compromise flight safety.

Jun 11, 2019

Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-700CBoeing 737-800Boeing 737-900ER

EASA AD US-2019-03-26

SUPERSEDED BY FAA AD 2021-26-17

FAA Airworthiness Directive 2019-03-26 is a final rule addressing certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates modifications to passenger service units (PSUs) and life vest panels to prevent detachment during accidents by replacing and installing new lanyards and inspecting torsion spring assemblies. This directive aims to enhance passenger safety by ensuring PSUs remain securely attached during emergencies.

Apr 2, 2019

Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-600Boeing 737-700Boeing 737-700CBoeing 737-800Boeing 737-900Boeing 737-900ER

EASA AD US-2019-03-07

Wings - Krueger Flap Bullnose Attachment Hardware - Inspection

Airworthiness Directive 2019-03-07 is a final rule issued by the Federal Aviation Administration addressing The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates inspections of the Krueger flap bullnose attachment hardware to detect discrepancies and missing hardware that could cause the bullnose to detach during flight. The directive expands applicability to all airplanes with Krueger flap bullnose installations due to the rotable nature of the parts.

Mar 22, 2019

Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-600Boeing 737-700Boeing 737-700CBoeing 737-800Boeing 737-900Boeing 737-900ER

EASA AD US-2019-01-03

Landing Gear - Trunnion Pin Assemblies - Inspection / Lubrication / Replacement

The Federal Aviation Administration's Airworthiness Directive 2019-01-03 addresses inspection, lubrication, and replacement requirements for the forward and aft trunnion pin assemblies of the main landing gears on certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This directive updates previous requirements to include all affected airplanes and prohibits installation of certain landing gear components unless specific conditions are met. It aims to prevent corrosion and chrome damage that could lead to landing gear collapse.

Mar 19, 2019

Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-600Boeing 737-700Boeing 737-700CBoeing 737-800Boeing 737-900Boeing 737-900ER

EASA AD US-2018-26-06

Doors - Main Landing Gear Center Door Assemblies - Inspection

Federal Aviation Administration Airworthiness Directive 2018-26-06 is a final rule addressing all Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates inspections of the main landing gear center door assemblies due to reports of loose, worn, or missing attachment bolts. The directive aims to ensure the structural integrity of the main landing gear doors to prevent potential damage and loss of airplane control.

Jan 11, 2019

Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-600Boeing 737-700Boeing 737-700CBoeing 737-800Boeing 737-900Boeing 737-900ER

EASA AD US-2018-23-09

Stabilizers - Horizontal Stabilizers - Inspection

Airworthiness Directive 2018-23-09 is a final rule issued by the Federal Aviation Administration addressing The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. It mandates inspections of horizontal stabilizers to detect cracks in the rear spar upper chord caused by galvanic corrosion due to a manufacturing oversight involving missing protective finishes on certain bushings.

Dec 12, 2018

Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-600Boeing 737-700Boeing 737-700CBoeing 737-800Boeing 737-900Boeing 737-900ER

EASA AD US-2018-20-24

Fuel - Maintenance or Inspection Program - Revision

The Federal Aviation Administration's Final Rule titled 'Fuel - Maintenance or Inspection Program - Revision' issues a new airworthiness directive (AD 2018-20-24) for certain Boeing 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This directive mandates revisions to the maintenance or inspection programs to incorporate updated airworthiness limitations related to fuel tank ignition prevention and the nitrogen generation system. The AD addresses unsafe conditions that could lead to fuel tank explosions or engine flameouts.

Nov 16, 2018

Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-600Boeing 737-700Boeing 737-700CBoeing 737-800Boeing 737-900Boeing 737-900ER