EASA Regulations for Airbus Canada BD-500-1A11

69 airworthiness directives and regulations affecting Airbus Canada BD-500-1A11.

EASA AD CF-2022-11

Engine — Airplane Flight Manual (AFM) Normal and Non-Normal Procedures — Erroneous Uncontrolled High Thrust Detection

Airworthiness Directive CF-2022-11 is issued by Transport Canada and addresses erroneous uncontrolled high thrust detection in Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft models. This directive mandates updates to the Airplane Flight Manual (AFM) normal and non-normal procedures to mitigate the risk of dual engine automatic shutdown upon landing caused by abrupt thrust lever movements above 16,000 feet. The directive supersedes a previous AD and introduces final procedural changes to enhance flight safety.

Mar 18, 2022

Airworthiness DirectiveFlight OpsSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2022-04

Fuselage — Painted Radome Diverter Strips

Canadian Airworthiness Directive CF-2022-04 addresses the issue of painted radome lightning diverter strips on Airbus Canada Limited Partnership model BD-500-1A11 aircraft, specifically serial numbers 55070, 55075, 55080, 55084, 55085, 55096, and 55099. The directive mandates inspection and potential replacement of the radome to ensure lightning protection effectiveness. This directive aims to maintain the safety and airworthiness of affected aircraft by preventing lightning damage to critical avionics.

Feb 16, 2022

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A11

EASA AD CF-2022-01

Placards and Markings — Elevator and Rudder Surface Rigging Inaccuracy Resulting from Flight Control Decal Positional Offset

Airworthiness Directive CF-2022-01 addresses issues related to placards and markings on Airbus Canada Limited Partnership aeroplanes, specifically models BD-500-1A10 and BD-500-1A11. The directive focuses on inaccuracies in elevator and rudder surface rigging caused by positional offsets of flight control decals. It applies to specific serial numbers of these aircraft models and mandates inspection and corrective maintenance actions.

Jan 12, 2022

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-46

Exhaust — Non-Conforming Thrust Reverser Actuation System Deploy Hoses

Canadian Airworthiness Directive CF-2021-46 addresses an issue with non-conforming thrust reverser actuation system deploy hoses on certain Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive mandates replacement of these specific deploy hoses to ensure safe operation of the thrust reverser system. This AD applies to serial numbers 50030, 50033 through 50039 of the BD-500-1A10 and serial number 55056 of the BD-500-1A11.

Dec 10, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-44

SUPERSEDED BY TCCA AD CF-2022-11

Canadian Airworthiness Directive CF-2021-44 addresses an unsafe condition affecting Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft models. The directive introduces new procedures in the Aircraft Flight Manual related to engine thrust lever handling to prevent dual engine automatic shutdowns upon landing caused by erroneous uncontrolled high thrust detection above 16,000 feet.

Dec 3, 2021

Airworthiness DirectiveFlight OpsSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-39

Doors — Emergency Exits — Overwing Emergency Exit Door Handle Cover — Opening Force Exceeds Design Limits

Canadian Airworthiness Directive CF-2021-39 addresses an issue with the overwing emergency exit door handle cover on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive identifies that the handle cover brackets may require excessive force to open, potentially hindering emergency evacuation. This AD mandates corrective action to ensure compliance with safety standards.

Nov 11, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-27

SUPERSEDED BY TCCA AD CF-2022-18

The Canadian Airworthiness Directive CF-2021-27 mandates updates to the maintenance limits and tasks for Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. It requires incorporation of the latest edition 013.00 of the published airworthiness limits into the approved maintenance schedule. This directive ensures compliance with Transport Canada regulations to maintain aircraft airworthiness.

Aug 12, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-25

Equipment / Furnishings — Monuments — Tie-Rod Preload on Interior Monuments

The Airworthiness Directive CF-2021-25 issued by Transport Canada addresses tie-rod preload issues on interior monuments in Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive mandates inspection and adjustment of tie-rod assemblies in specific cabin areas to prevent potential hazards during emergency landings. This directive applies to aircraft with serial numbers 50010 through 50040 for BD-500-1A10 and 55003 through 55057 for BD-500-1A11.

Jul 23, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-21

SUPERSEDED BY TCCA AD CF-2021-50

Canadian Airworthiness Directive CF-2021-21 addresses a fuel system safety issue on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive mandates inspections and corrective actions related to missing lockwire on fuel pressure switches installed on AC boost pump cartridges and engine feed pressure switches. This AD aims to prevent fuel leaks and potential fire hazards caused by loose fuel pressure switches.

Jul 1, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-18

SUPERSEDED BY TRANSPORT CANADA AD CF-2021-22

Canadian Airworthiness Directive CF-2021-18 addresses corrosion issues on the main landing gear (MLG) lower spindle pin of Airbus Canada Limited Partnership model BD-500-1A10 and BD-500-1A11 aircraft. The directive mandates inspections and necessary repairs or replacements to prevent structural failure of the MLG lower spindle pin. This AD is an interim safety measure to mitigate risks associated with corrosion and potential fatigue cracking.

May 11, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2020-32R1

SUPERSEDED BY TCCA AD CF-2025-27

Airworthiness Directive CF-2020-32R1 is issued by Transport Canada and applies to Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 aircraft. It addresses cracks found in the aft wing-to-body fairing (WTBF) structure, specifically around the tie-rod attachments at fuselage station 973. The directive mandates inspections, repairs, tie-rod load adjustments, and incorporation of reinforcement modifications to maintain structural integrity.

Apr 26, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-10

SUPERSEDED BY TCCA AD CF-2022-67

Canadian Airworthiness Directive CF-2021-10 addresses vibration-induced failures on Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft equipped with Gogo 2Ku antenna radomes part numbers P23743-605 or P23743-606. The directive mandates replacement of the Emergency Locator Transmitter (ELT) antenna and inspection of the fuselage skin around the antenna attachment area to prevent antenna loss and fuselage damage. This AD applies to aircraft from serial number 50001 and 55001 onward respectively.

Mar 19, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-09

SUPERSEDED BY TCCA AD CF-2025-47

Canadian Airworthiness Directive CF-2021-09 addresses a potential safety issue in Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft. It mandates inspection and corrective actions for twisted or damaged Motive Flow flexible fuel line assemblies in the pylon to wing area to prevent fuel leaks and fire risks. This directive applies to specific serial numbers of these aircraft models.

Mar 15, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-07

SUPERSEDED BY TRANSPORT CANADA AD CF-2021-27

Canadian Airworthiness Directive CF-2021-07 mandates updated airworthiness limitations for Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft models. This directive requires incorporation of the latest Airbus Canada Airworthiness Limitations (AWL) Issue No. 012.01 into the approved maintenance schedules. It supersedes the previous AD CF-2020-25 and applies to aircraft serial numbers 50001 and subsequent for BD-500-1A10, and 55001 and subsequent for BD-500-1A11.

Mar 4, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-03

Equipment/Furnishings — Mid Fuselage Insulation — Potential Damage to Insulation Blankets below Over Wing Emergency Exit Door (OWEED)

The Canadian Airworthiness Directive CF-2021-03 titled 'Equipment/Furnishings — Mid Fuselage Insulation — Potential Damage to Insulation Blankets below Over Wing Emergency Exit Door (OWEED)' applies to Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11 with specified serial numbers. It addresses potential damage to insulation blankets located beneath the left and right over wing emergency exit doors. The directive mandates inspections and corrective actions to ensure continued fire protection.

Feb 16, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2021-01

Fire Protection — Powerplant Fire Extinguishing (FIREX) Interconnection Hose Not Properly Installed

Canadian Airworthiness Directive CF-2021-01 addresses a fire protection issue related to the powerplant fire extinguishing (FIREX) interconnection hose installation on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive applies to specific serial numbers of these models and mandates corrective action to ensure the FIREX hose is properly secured. This measure aims to prevent ineffective fire extinguishing in the event of a powerplant fire.

Jan 11, 2021

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2020-30R1

Fuselage — Forward Avionics Bay — Water Ingress from Forward Galley Drains

Airworthiness Directive CF-2020-30R1 addresses water ingress issues in the forward avionics bay caused by forward galley drains on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. This directive applies to specific serial numbers of these models and aims to prevent water from causing electrical short circuits that could affect avionics functionality. The directive updates previous requirements to reflect production modifications.

Dec 14, 2020

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2019-31R1

Ice and Rain Protection — Insufficient Engine Core Ventilation Resulting in Higher Engine Core Temperatures

Airworthiness Directive CF-2019-31R1 addresses insufficient engine core ventilation leading to higher engine core temperatures on Airbus Canada Limited Partnership model BD-500-1A11 aircraft. This directive updates previous requirements to prevent nuisance Engine Fire Warning messages that could cause unnecessary engine shutdowns. It applies specifically to certain serial-numbered BD-500-1A11 aeroplanes.

Oct 23, 2020

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A11

EASA AD CF-2020-41

Engine - Aircraft Flight Manual — Operating Limitations

The Airworthiness Directive CF-2020-41 titled 'Engine - Aircraft Flight Manual — Operating Limitations' applies to Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aeroplanes equipped with Pratt & Whitney PW1521G, PW1524G, PW1521G-3, or PW1524G-3 engines. This directive addresses engine in-flight shutdowns by updating operating limitations in the Aircraft Flight Manual for operations above 29,000 feet and requires inspections following engine N1 speed exceedances. It mandates incorporation of an updated AFM supplement and inspections of the low-pressure compressor rotor when necessary.

Oct 20, 2020

Airworthiness DirectiveFlight OpsMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11

EASA AD CF-2020-42

Fuselage — Application of Additional Protection on Waste Box to Inhibit Future Corrosion Development

Airworthiness Directive CF-2020-42 is issued by Transport Canada and applies to Airbus Canada Limited Partnership aeroplanes, specifically models BD-500-1A10 and BD-500-1A11. The directive addresses corrosion issues on the waste box, waste access doubler, and waste service door 146BR located at the rear fuselage. It mandates the application of additional protective coatings to inhibit future corrosion development on these parts.

Oct 20, 2020

Airworthiness DirectiveMaintenanceSafety MgmtAirbus BD-500 (A220 Series)Airbus Canada BD-500-1A10Airbus Canada BD-500-1A11