EASA Regulations for Airbus Canada BD-500-1A11

76 airworthiness directives and regulations affecting Airbus Canada BD-500-1A11.

EASA AD CF-2023-37R1

May 23, 2024

Standard Practices / Structures — Verification of Aircraft Repairs and Damage Assessments

Airworthiness Directive CF-2023-37R1 is a Canadian regulatory update addressing Airbus Canada Limited Partnership (ACLP) model BD-500-1A10 and BD-500-1A11 aircraft. It focuses on verifying aircraft repairs and damage assessments in light of revised structural stress data and operational loads for the A220 aircraft. The directive ensures compliance with updated repair manuals and engineering orders to maintain structural integrity.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-68R1

May 2, 2024

Stabilizer — Horizontal Stabilizer — Jamming of the Horizontal Stabilizer Trim Actuator

Airworthiness Directive CF-2023-68R1 addresses the jamming issue of the Horizontal Stabilizer Trim Actuator (HSTA) on Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft. The directive mandates lubrication and inspection procedures to prevent water intrusion and freezing in the HSTA ballscrew assembly, which can cause loss of pitch trim capability. This directive applies to specific serial numbers of the affected models and updates previous requirements.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2024-13

Apr 30, 2024

Hydraulic Power — Improperly Torqued Rudder Power Control Unit Hydraulic Fittings

Canadian Airworthiness Directive CF-2024-13 addresses hydraulic power issues related to improperly torqued rudder Power Control Unit (PCU) hydraulic fittings on Airbus Canada Limited Partnership BD-500-1A11 aircraft, specifically serial numbers 55170, 55172, and 55174 through 55183. The directive mandates corrective actions to prevent hydraulic fluid leakage that could lead to loss of hydraulic systems. It applies to these specific aircraft models and serial numbers.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-70

Oct 18, 2023

Standard Practices/Structures — Verification of Aircraft Repairs and Damage Assessments

The Canadian Airworthiness Directive CF-2023-70 titled 'Standard Practices/Structures — Verification of Aircraft Repairs and Damage Assessments' applies to Airbus Canada Limited Partnership BD-500-1A11 model aircraft. It mandates a review and disposition of existing structural repairs and damage assessments based on revised operational load data affecting the A220 aircraft. The directive also prohibits the use of certain previously authorized repair data for new structural repairs.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-69

Oct 18, 2023

Time Limits / Maintenance Checks — Airworthiness Limitations — Implementation

Airworthiness Directive CF-2023-69 is issued by Transport Canada and applies to Airbus Canada Limited Partnership aeroplanes Model BD-500-1A10 and BD-500-1A11. This directive mandates the implementation of updated Airworthiness Limitations as specified in Issue No. 017.01 of the Airbus Canada Limited Partnership AWL publication. It ensures that maintenance schedules reflect the latest mandatory maintenance tasks and limitations for continued airworthiness.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-67

Oct 10, 2023

Electrical Cabin Systems — Lug — Improper Terminal Lug Selection

Canadian Airworthiness Directive CF-2023-67 addresses improper terminal lug selection in electrical cabin systems on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive applies to specific serial numbers of these models and focuses on correcting terminal lug installations at lavatory and galley locations. This action aims to prevent electrical issues that could lead to false alarms and system malfunctions.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-64

Sep 19, 2023

Fuel Distribution — Twisted Motive Flow Flexible Fuel Line

Airworthiness Directive CF-2023-64 is issued by Transport Canada and applies to Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft with specific serial numbers. The directive addresses twisted Motive Flow (MF) flexible fuel lines installed in early configuration pylon to wing areas, which may cause fuel leaks and fire risks. It mandates inspection and corrective actions to ensure fuel line integrity and safety.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-57

Jul 31, 2023

Equipment / Furnishings — Emergency — Replacement and Relocation of the Wardrobe Personal Locator Beacon

Canadian Airworthiness Directive CF-2023-57 addresses the replacement and relocation of the Personal Locator Beacon (PLB) on Airbus Canada Limited Partnership model BD-500-1A11 aircraft, specifically serial numbers 55003 through 55009, 55016, 55034, 55038, 55039, 55041 through 55043, and 55050 through 55055. This directive mandates modifications to the wardrobe area to install a new PLB part number 500-32-2Y-H to enhance safety. The directive is issued under Canadian Aviation Regulation 521.427.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-58

Jul 31, 2023

Fire Protection — Fire Extinguishing System (FIREX) — Line Fouling with Hi-Lite Fasteners

Airworthiness Directive CF-2023-58 addresses fire protection concerns related to the fire extinguishing system (FIREX) on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive focuses on inspecting and correcting line fouling caused by Hi-Lite fasteners in the center mid fuselage and keel beam areas. It mandates inspections and potential repairs to ensure the cargo compartment fire extinguishing system remains fully operational.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-54

Jul 19, 2023

Time Limits / Maintenance Checks – Airworthiness Limitations – Implementation

Airworthiness Directive CF-2023-54 is issued by Transport Canada and applies to Airbus Canada Limited Partnership aeroplanes, specifically models BD-500-1A10 and BD-500-1A11. This directive mandates updates to the aircraft maintenance schedules to incorporate the latest Airworthiness Limitations as defined in Issue No. 017.00 of the AWL publication. The directive ensures continued airworthiness by enforcing compliance with updated maintenance tasks and intervals.

Airworthiness DirectiveSuperseded
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-52

Jul 13, 2023

Oxygen — Portable Oxygen Bottles — Oxygen Masks Not Connected to Oxygen Bottles After Servicing

The Canadian Airworthiness Directive CF-2023-52 addresses an issue with portable oxygen bottles and oxygen masks on certain Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. It mandates inspection and correction of oxygen masks that are not connected to their respective portable oxygen bottles after maintenance. This directive ensures proper oxygen supply to cabin crew and passengers during decompression or emergency situations.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-31

May 9, 2023

Equipment / Furnishings — Fixed Emergency Locator Transmitter

Canadian Airworthiness Directive CF-2023-31 addresses the fixed Emergency Locator Transmitter (ELT) installation on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. The directive applies to specific serial numbers of these models and mandates changes to the ELT equipment to enhance safety. It focuses on replacing the existing ELT part number 51090170-1 with a new part number 51090130-2 to prevent fire risks associated with lithium battery thermal runaway.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-27

May 5, 2023

Electrical System Installation — Rear Cabin — Low Clearance Condition

The Airworthiness Directive CF-2023-27 titled 'Electrical System Installation — Rear Cabin — Low Clearance Condition' applies to Airbus Canada Limited Partnership aeroplanes BD-500-1A10 and BD-500-1A11 with specified serial numbers. It addresses a potential chafing issue between a power harness and the left side window shade in the rear cabin area. This directive mandates corrective action to prevent electrical system failures that could affect emergency equipment functionality.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-28

May 5, 2023

Fire Protection — Fire Extinguisher Bottle Available Push Button Annunciators (PBAs) — Do Not Illuminate After Direct Current (DC) Bus Loss

Canadian Airworthiness Directive CF-2023-28 addresses a fire protection issue in Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft. The directive focuses on the fire extinguisher bottle available push button annunciators (PBAs) that fail to illuminate after a direct current (DC) bus loss, potentially misleading flight crews during engine fire events. This AD mandates a software upgrade to restore proper PBA functionality.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2022-13R1

Apr 19, 2023

Pneumatic — Non-Conforming Bleed Leak Detection System Sensing Elements

Airworthiness Directive CF-2022-13R1 is issued by Transport Canada concerning Airbus Canada Limited Partnership aeroplanes Model BD-500-1A10 and BD-500-1A11. The directive addresses non-conforming bleed leak detection system sensing elements that may have insufficient salt fill, potentially impairing the detection of hot bleed air leaks. This condition affects the safety of the aircraft by risking damage to structures and systems critical for safe flight and landing.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-24

Apr 11, 2023

Electrical Power – Variable Frequency Generator (VFG) Power-Feeder Harness Chafing

Canadian Airworthiness Directive CF-2023-24 addresses a safety issue on Airbus Canada Limited Partnership BD-500-1A10 and BD-500-1A11 aircraft models. The directive mandates modification of the variable frequency generator (VFG) power-feeder harness routing to prevent chafing that could cause loss of electrical power or fire. This directive applies to specific serial numbers of these aircraft and is issued under Canadian Aviation Regulation 521.427.

Airworthiness DirectiveSuperseded
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-23

Apr 11, 2023

Flight Controls — Replacement of Horizontal Stabilizer Trim Actuator Upper Gimbal Bushing Flanges

Canadian Airworthiness Directive CF-2023-23 mandates the replacement of the horizontal stabilizer trim actuator (HSTA) upper gimbal bushing flanges on Airbus Canada Limited Partnership aircraft models BD-500-1A10 and BD-500-1A11. This directive applies to specific serial numbers of these models and aims to address a potential flight control issue. The directive ensures continued airworthiness and safety of the affected aircraft.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-15

Mar 6, 2023

Flight Controls — Electrical Rigging Confirmation and Surface Travel Check of Primary Flight Control Surfaces

Canadian Airworthiness Directive CF-2023-15 addresses the electrical rigging confirmation and surface travel check of primary flight control surfaces on Airbus Canada Limited Partnership model BD-500-1A10 and BD-500-1A11 aircraft. This directive mandates updated maintenance procedures to ensure accurate positioning of flight controls following electrical rigging. It applies to all serial numbers of these aircraft models.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-08

Feb 14, 2023

Equipment / Furnishings — Connector Not To Specification — Emergency Power Supply Unit

Canadian Airworthiness Directive CF-2023-08 addresses a manufacturing defect in the electrical connectors of Emergency Power Supply Units (EPSU) on Airbus Canada BD-500-1A11 aircraft, serial numbers 55071 to 55074. The directive mandates corrective actions to ensure proper connector locking and prevent loss of emergency lighting. This directive applies specifically to certain Airbus Canada Limited Partnership aircraft formerly known as Bombardier Inc. models.

Airworthiness Directive
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A11

EASA AD CF-2023-04

Feb 6, 2023

Time Limits / Maintenance Checks – Airworthiness Limitations – Implementation

Canadian Airworthiness Directive CF-2023-04 is issued by Transport Canada and applies to Airbus Canada Limited Partnership aeroplanes Model BD-500-1A10 and BD-500-1A11, including serial numbers 5R0001 and 55001 and subsequent. This directive mandates the incorporation of updated Airworthiness Limitations into the maintenance schedules of these aircraft to ensure continued airworthiness. It supersedes a previous directive and introduces more restrictive maintenance requirements.

Airworthiness DirectiveSuperseded
  • Airbus BD-500 (A220 Series)
  • Airbus Canada BD-500-1A10
  • Airbus Canada BD-500-1A11