EASA Regulations for Airbus A350-1041

103 airworthiness directives and regulations affecting Airbus A350-1041.

EASA AD 2020-0126

Flight Controls — Flap Drive Struts and Lever Bearing Assemblies — Inspection

EASA Airworthiness Directive 2020-0126 is an airworthiness directive issued for Airbus A350-1041 aeroplanes. It mandates inspections of the flap drive struts and lever bearing assemblies at flap station 3 on both right-hand and left-hand sides to detect wear and corrosion. This directive aims to prevent potential flap detachment during flight by ensuring the structural integrity of these components.

Jun 3, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-1041

EASA AD 2020-0091

SUPERSEDED BY EASA AD 2021-0206

EASA Airworthiness Directive 2020-0091 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with updated safe life airworthiness limitations specified in the Airbus A350 Airworthiness Limitations Section Part 1, Revision 04 including Variation 4.3. The directive ensures continued airworthiness by requiring operators to adhere to new or more restrictive maintenance tasks and life limits for components.

Apr 22, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0027R1

Flight Controls — Aileron, Elevator and Rudder Electro-Hydrostatic Actuators — Inspection / Replacement

EASA Airworthiness Directive 2020-0027R1 is an updated regulatory requirement addressing inspection and replacement of Electro-Hydrostatic Actuators (EHAs) for the aileron, elevator, and rudder flight controls on Airbus A350-941 and A350-1041 aircraft. The directive mandates insulation resistance checks and corrective actions for affected EHAs to ensure continued safe operation of these flight control components.

Feb 21, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0031

SUPERSEDED BY EASA AD 2022-0112

EASA Airworthiness Directive 2020-0031 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses an unsafe condition related to passenger oxygen masks that may stick and fail to fully inflate after exposure to high ground temperatures. The directive mandates replacement of affected passenger oxygen masks to ensure continued airworthiness.

Feb 18, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0028

Exhaust — Thrust Reverser Hinge Nut — Inspection / Replacement

EASA Airworthiness Directive 2020-0028 is an airworthiness directive addressing Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection and replacement of thrust reverser hinge nuts on both engines to ensure continued airworthiness and safety. The directive references Airbus Service Bulletin A350-78-P013 and Goodrich Service Bulletin RA35078-059 for detailed instructions.

Feb 14, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2020-0020-E

SUPERSEDED BY EASA AD 2020-0090

EASA Airworthiness Directive 2020-0020-E is an emergency directive affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the risk of un-commanded engine in-flight shutdowns caused by liquid spillage on the ENG START panel or ECAM Control Panel in the flight deck. The directive mandates amendments to the Airbus A350 Airplane Flight Manual to include procedures for handling liquid spillage in the cockpit.

Feb 6, 2020
Airworthiness DirectiveFlight OpsSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0301

Flight Controls — Aileron and Elevator Electro-Hydrostatic Actuators — Modification Aircraft Flight Manual — Amendment

EASA Airworthiness Directive 2019-0301 is an amendment addressing flight control issues on Airbus A350-941 and A350-1041 aeroplanes. It focuses on the modification of electro-hydrostatic actuators (EHA) for inboard ailerons and elevators, specifically parts with P/N CA67001-025, CB36001-003, and CA67006-025. The directive mandates updates to the Aircraft Flight Manual and installation of modifications to ensure continued airworthiness.

Dec 12, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0288

SUPERSEDED BY EASA AD 2022-0126

EASA Airworthiness Directive 2019-0288 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with the Airbus A350 Airworthiness Limitations Section Part 3 Revision 05 and variation 5.3, which include certification maintenance requirements essential for continued airworthiness.

Nov 28, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0265

Wings — Main Landing Gear Forward Pintle Bearing Lock Washer Tabs and Nuts — Inspection

EASA Airworthiness Directive 2019-0265 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspections of the main landing gear forward pintle bearing lock washer tabs and nuts to ensure proper installation and locking. The directive addresses a potential unsafe condition related to incorrect lock washer tab engagement that could lead to main landing gear collapse.

Oct 25, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0210

SUPERSEDED BY EASA AD 2024-0220

EASA Airworthiness Directive 2019-0210 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates inspection of cabin oxygen containers and adjacent panel fasteners to ensure proper installation and prevent oxygen mask deployment failure. The directive applies to specific manufacturer serial numbers as listed in Airbus Alert Operators Transmission A35P015-19.

Aug 26, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0206

SUPERSEDED BY EASA AD 2021-0141

EASA Airworthiness Directive 2019-0206 is an airworthiness directive issued for Airbus A350-941 and A350-1041 aeroplanes, excluding those with certain production modifications. It addresses inspection and maintenance requirements for the trimmable horizontal stabilizer fittings and bearing assembly attachment interface to prevent potential corrosion and structural issues.

Aug 20, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0175

Power Plant — Engine Mounts and Thrust Links Washers — Inspection / Replacement

EASA Airworthiness Directive 2019-0175 is an airworthiness directive affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the inspection and replacement of washers installed on engine mount primary pins and thrust links to prevent potential engine mount pin disengagement. The directive applies specifically to certain manufacturer serial numbers and references Airbus Alert Operators Transmission A71P016-19 for detailed instructions.

Jul 19, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0168

SUPERSEDED BY EASA AD 2024-0186

EASA Airworthiness Directive 2019-0168 is an airworthiness directive issued for Airbus A350-941 and A350-1041 aeroplanes concerning the inspection of crew oxygen cylinder assemblies with part numbers 4441227-058-000 and 4441227-058-001. It addresses a design defect causing loss of retention of the regulator inlet filter retainer, which could lead to fire risk during ground operational testing. The directive mandates inspections and corrective actions to ensure continued airworthiness of affected oxygen cylinders.

Jul 16, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2019-0020

Flight Controls — Slat Geared Rotary Actuators — Replacement

EASA Airworthiness Directive 2019-0020 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses the replacement of slat geared rotary actuators (SGRA) with specific part numbers that have been found to have cracks due to manufacturing process issues. The directive mandates corrective actions to ensure continued safe operation of these aircraft.

Jan 31, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2018-0245R1

SUPERSEDED BY EASA AD 2019-0168

EASA Airworthiness Directive 2018-0245R1 is an amendment addressing safety concerns on Airbus A350-941 and A350-1041 aeroplanes related to the crew oxygen cylinder assemblies with part number 4441227-058-000. The directive mandates operational checks and replacement of affected oxygen cylinder assemblies to prevent potential ignition or fire during ground operational testing. This directive applies to all manufacturer serial numbers of the specified Airbus A350 models.

Dec 5, 2018
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2018-0246

Pneumatic — Engine Bleed Air System — Modification Aircraft Flight Manual — Amendment

EASA Airworthiness Directive 2018-0246 is an airworthiness directive affecting Airbus A350-941 and A350-1041 aeroplanes, excluding those with Airbus modification 113759 embodied in production. This directive addresses an issue with the engine bleed air system related to the Auxiliary Power Unit (APU) bleed leak alert and requires an amendment to the Aircraft Flight Manual (AFM).

Nov 13, 2018
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2018-0213R1

SUPERSEDED BY EASA AD 2019-0301

EASA Airworthiness Directive 2018-0213R1 is an amendment addressing a technical issue in the inboard aileron electro-hydrostatic actuators on Airbus A350-941 and A350-1041 aeroplanes. The directive requires updates to the Aircraft Flight Manual and installation of specific software modifications to prevent potential loss of inboard aileron control. This directive applies to all serial numbers except those with Airbus modifications 113758 and 113759 incorporated during production.

Nov 9, 2018
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2018-0243

Doors — Bulk Cargo Door Hinge Arms — Modification

EASA Airworthiness Directive 2018-0243 is an airworthiness directive issued for Airbus A350-941 and A350-1041 aeroplanes. It addresses issues related to the bulk cargo door hinge arms, specifically the bonding and securing of hinge arm bushes. The directive mandates modifications to affected bulk cargo doors to ensure continued airworthiness and safety.

Nov 8, 2018
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2018-0220

Wings — Wing Rib Foot to Wing Lower Cover Clearance — Inspection / Temporary Operational Restrictions

EASA Airworthiness Directive 2018-0220 is an airworthiness directive issued by EASA affecting Airbus A350-941 and A350-1041 aeroplanes. It addresses a potential unsafe condition related to the clearance between wing rib feet and the wing lower cover, which could lead to fuel tank ignition under certain conditions. The directive mandates inspections and temporary operational restrictions to ensure continued airworthiness.

Oct 12, 2018
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041

EASA AD 2018-0179

SUPERSEDED BY EASA AD 2019-0288

EASA Airworthiness Directive 2018-0179 is an airworthiness directive issued by the European Aviation Safety Agency affecting Airbus A350-941 and A350-1041 aeroplanes. It mandates compliance with the updated Airbus A350 Airworthiness Limitations Section (ALS) Part 3, variation 4.2, which includes new and more restrictive Certification Maintenance Requirements (CMRs).

Aug 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A350Airbus A350-941Airbus A350-1041