EASA Regulations for Airbus A330-841

16 airworthiness directives and regulations affecting Airbus A330-841.

Get the next one by email

New ADs and bulletins for Airbus A330-841, summarized like the ones below, every Monday.

EASA AD 2026-0200

Oct 20, 2026

Landing Gear – Tachometer Wiring Harness – Modification

The document titled 'Landing Gear – Tachometer Wiring Harness – Modification' is an airworthiness directive issued for Airbus S.A.S. aircraft models A330, A330-841, and A330-941. It addresses a modification related to the wiring harness of the landing gear tachometer system on these specific aircraft types. The directive aims to ensure continued airworthiness and operational safety of the affected aircraft.

Airworthiness Directive
  • Airbus A330841941

EASA PAD 26-107

Sep 17, 2026

Flight Controls – Flight Control Primary Computer – Modification

EASA Airworthiness Directive Proposal 26-107 is a regulatory document addressing Airbus A330-841 aeroplanes with specific manufacturer serial numbers. It mandates modifications to the Flight Control Primary Computer (FCPC) to upgrade to the P19/M32NEO 2K2 standard to prevent flight control system faults. The directive applies to certain serial numbers and includes concurrent modification requirements.

Proposed AD
  • Airbus A330841

EASA AD US-2026-10-05

Jun 8, 2026

Goodrich Cabin Attendant Seats - Replacement

The Federal Aviation Administration's Airworthiness Directive 2026-10-05 is a final rule addressing Goodrich cabin attendant seats installed on various Airbus SAS Model A330 and A340 series airplanes. This directive requires replacing non-compliant seat track attachments and hardware and re-identifying the seats with new part numbers to ensure compliance with safety standards. The affected aircraft include Airbus A330-200, A330-300, A330-743L, A330-841, A330-941, A340-200, A340-300, A340-541, A340-542, A340-641, and A340-642 models.

Airworthiness Directive
  • Airbus A330-200
  • Airbus A330-300
  • Airbus A330-743L
  • Airbus A330-841
  • Airbus A330-941
  • Airbus A340-200
  • Airbus A340-300
  • Airbus A340-541
  • Airbus A340-542
  • Airbus A340-641
  • Airbus A340-642

EASA AD 2023-0111R1

May 28, 2024

Pneumatic – High Pressure Valve – Inspection / Replacement

EASA Airworthiness Directive 2023-0111R1 is an updated safety directive addressing issues with the high pressure valve (HPV) clips on Airbus A330-841 and A330-941 aeroplanes. It mandates amendments to the Aircraft Flight Manual (AFM), updates to the Master Minimum Equipment List (MMEL), and inspection or replacement of HPV clips to prevent potential duct bursts and loss of aircraft control. This directive applies to all manufacturer serial numbers of the specified Airbus A330 models.

Airworthiness DirectiveSuperseded
  • Airbus A330841941

EASA AD 2024-0014

Jan 10, 2024

Time Limits / Maintenance Checks – System Equipment Maintenance Requirements – ALS Part 4 – Amendment

EASA Airworthiness Directive 2024-0014 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting all Airbus A330 aeroplane models including A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841, and A330-941. This directive mandates compliance with updated system equipment maintenance requirements as specified in Airbus A330 Airworthiness Limitations Section Part 4 Revision 9. It ensures continued airworthiness by requiring operators to follow new or more restrictive maintenance tasks and life limits for components.

Airworthiness DirectiveSuperseded
  • Airbus A330201202203223223F243243F301302303321322323341342343841941

EASA AD 2023-0169

Sep 4, 2023

Fire Protection — Engine Fire Extinguishing Pipes — Inspection

EASA Airworthiness Directive 2023-0169 is an airworthiness directive addressing Airbus A330-841 and A330-941 aeroplanes with specific manufacturer serial numbers. It mandates inspection of the engine fire extinguishing pipe drain holes to ensure protective caps have been removed, preventing potential fire extinguishing failures. This directive applies specifically to certain Airbus A330 models and aims to maintain safe engine fire protection systems.

Airworthiness Directive
  • Airbus A330841941

EASA AD 2023-0054

Mar 14, 2023

Fuselage — Rear Fuselage — Modification

EASA Airworthiness Directive 2023-0054 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A330-202, A330-203, A330-223, A330-243, and A330-841 aeroplanes. The directive addresses a modification to the rear fuselage, specifically the circumferential joint at Frame 58, to ensure structural integrity. It applies to specific manufacturer serial numbers of these aircraft models.

Airworthiness Directive
  • Airbus A330202203223243841

EASA AD 2022-0253

Dec 19, 2022

Engine Fuel & Control — Engine Electronic Control Software — Modification / Replacement

EASA Airworthiness Directive 2022-0253 is an airworthiness directive addressing the engine electronic control software on Airbus A330-841 and A330-941 aeroplanes equipped with Rolls-Royce Trent 7000 engines. It mandates modifications or replacements of affected Engine Electronic Control (EEC) software to prevent potential engine crystal icing protection loss. The directive applies to specific EEC software part numbers and requires compliance to ensure continued safe operation.

Airworthiness Directive
  • Airbus A330841941

EASA AD 2022-0227

Nov 24, 2022

Pneumatic – High Pressure Valve – Inspection / Replacement

EASA Airworthiness Directive 2022-0227 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A330-841 and A330-941 aeroplanes. It addresses issues related to the engine bleed air system high pressure valve (HPV) clips, specifically Part Number 6764-222, requiring inspections, maintenance, and amendments to the Airplane Flight Manual and Master Minimum Equipment List. The directive aims to prevent potential damage caused by leaking HPV clips that could lead to loss of aircraft control.

Airworthiness DirectiveSuperseded
  • Airbus A330841941

EASA AD 2021-0250R1

Oct 12, 2022

Time Limits / Maintenance Checks – System Equipment Maintenance Requirements – ALS Part 4 – Amendment

EASA Airworthiness Directive 2021-0250R1 is an updated directive affecting all Airbus A330 models, including A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-841, and A330-941. It mandates compliance with the Airbus A330 Airworthiness Limitations Section (ALS) Part 4 Revision 8, which contains system equipment maintenance requirements essential for continued airworthiness. This directive ensures operators maintain updated maintenance tasks and life limits for components to prevent unsafe conditions.

Airworthiness DirectiveSuperseded
  • Airbus A330201202203223223F243243F301302303321322323341342343841941

EASA AD 2022-0181

Aug 29, 2022

Pneumatic – High Pressure Valve – Inspection / Replacement

EASA Airworthiness Directive 2022-0181 is an airworthiness directive issued for Airbus A330-841 and A330-941 aeroplanes addressing issues related to the engine bleed air system high pressure valve (HPV) clips, part number 6764-222. The directive mandates amendments to the Airplane Flight Manual (AFM), updates to the Master Minimum Equipment List (MMEL), and repetitive inspections and replacements of HPV clips to prevent potential duct bursts and loss of airplane control.

Airworthiness DirectiveSuperseded
  • Airbus A330841941

EASA AD 2022-0170-E

Aug 17, 2022

Superseded by EASA AD 2022-0181

EASA Airworthiness Directive 2022-0170-E is an emergency directive affecting Airbus A330-841 and A330-941 aeroplanes. It addresses issues related to leaking Bleed System High Pressure Valves (HPV) that may cause damage to the Pressure Regulating Valve and potentially lead to loss of aircraft control. The directive mandates amendments to the Aircraft Flight Manual and imposes dispatch restrictions to mitigate the risk.

Airworthiness DirectiveSuperseded
  • Airbus A330841941

EASA AD 2021-0210

Sep 16, 2021

Aircraft Flight Manual — Take-off Distance with Crosswind above 20 Knots — Amendment

EASA Airworthiness Directive 2021-0210 is an amendment addressing the Airbus A330-841 and A330-941 aeroplanes. It mandates an update to the Aircraft Flight Manual to correct take-off distance calculations when crosswinds exceed 20 knots. This directive ensures accurate performance data is used for safe aircraft operation under these conditions.

Airworthiness Directive
  • Airbus A330841941

EASA AD 2021-0198

Aug 27, 2021

Engine Fuel & Control – Engine Electronic Control Software – Modification / Replacement

EASA Airworthiness Directive 2021-0198 is an airworthiness directive issued for Airbus A330-841 and A330-941 aeroplanes equipped with Rolls-Royce Trent 7000 engines. It addresses an unsafe condition related to the Engine Electronic Control (EEC) software that could cause erroneous engine oil pressure warnings and potentially lead to dual engine in-flight shutdown. The directive mandates modification or replacement of affected EEC software to a serviceable standard.

Airworthiness DirectiveSuperseded
  • Airbus A330841941

EASA AD 2021-0035

Jan 25, 2021

Exhaust — Thrust Reverser Translating Cowl Pressure Seals — Inspection / Rework

EASA Airworthiness Directive 2021-0035 is an airworthiness directive issued by the European Union Aviation Safety Agency addressing Airbus A330-841 and A330-941 aeroplanes. It mandates inspection and rework of thrust reverser translating cowl pressure seals to ensure their integrity and proper bonding. The directive applies to specific affected thrust reverser parts identified by serial numbers.

Airworthiness Directive
  • Airbus A330841941