RegNotify

EASA Regulations for Airbus A321

279 airworthiness directives and regulations affecting Airbus A321.

EASA AD 2020-0148

Fuel — Low Pressure Shut Off Valve — Inspection

EASA Airworthiness Directive 2020-0148 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A319, A320, and A321 aircraft models. It addresses a potential unsafe condition related to fuel leaks from low pressure shut off valves located on engine #1 and engine #2 pylon areas. The directive mandates inspection and corrective actions to prevent possible fuel spillage and fire hazards.

Jul 6, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A319Airbus A320Airbus A321

EASA AD 2020-0036R1

SUPERSEDED BY EASA AD 2022-0085

EASA Airworthiness Directive 2020-0036R1 is an updated regulatory requirement issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aircraft models. It mandates compliance with the Airworthiness Limitations Section (ALS) Part 2, which includes damage tolerant airworthiness limitation items essential for continued airworthiness. This directive ensures operators maintain the structural integrity of these aircraft by following specified maintenance tasks and intervals.

Jun 24, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0135

Engine — High Pressure Turbine Rotor Stage 2 Disc — Inspection

EASA Airworthiness Directive 2020-0135 is an airworthiness directive addressing the inspection and replacement of high pressure turbine rotor stage 2 discs on CFM International LEAP-1A engines. This directive applies to various LEAP-1A engine models installed on Airbus A319, A320, and A321 aircraft. It mandates inspection and replacement of specific affected turbine discs to ensure continued airworthiness.

Jun 15, 2020
Airworthiness DirectiveMaintenanceSafety MgmtCFM International LEAP-1ACFM International LEAP-1CAirbus A319Airbus A320Airbus A321

EASA AD 2020-0133

SUPERSEDED BY EASA AD 2021-0049

EASA Airworthiness Directive 2020-0133 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It addresses the issue of air leakage through certain cargo door seals that could reduce the effectiveness of the cargo compartment fire extinguishing system. The directive applies to specific part numbers of forward, aft, and bulk cargo door seals installed on these aircraft models.

Jun 10, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0130

Landing Gear — Main Landing Gear Torque Link Apex Pin — Replacement / Inspection

EASA Airworthiness Directive 2020-0130 is an airworthiness directive addressing the replacement and inspection of the main landing gear torque link Apex pins on Airbus A318, A319, A320, and A321 aeroplanes. The directive targets specific parts identified by part number 201383606 and serial numbers listed in Airbus Alert Operators Transmission A32N018-20 Revision 01. It aims to ensure continued airworthiness by mitigating risks associated with torque link pin failures.

Jun 8, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2019-0171R2

Aircraft Flight Manual Section Limitations — Amendment

EASA Airworthiness Directive 2019-0171R2 is an amendment addressing Airbus A321neo aircraft equipped with specific Elevator Aileron Computer (ELAC) units. It mandates changes to the Aircraft Flight Manual (AFM) limitations to mitigate reduced angle of attack protection caused by certain ELAC software versions. The directive applies to various A321neo models except those with Airbus modification 163923 installed in production.

Jun 2, 2020
Airworthiness DirectiveFlight OpsSafety MgmtAirbus A321Airbus A321neo

EASA AD 2020-0122

Equipment / Furnishings — Overhead Stowage Compartment Fixation Brackets — Inspection

EASA Airworthiness Directive 2020-0122 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A320-271N, A321-211, and A321-271N aeroplanes with specific manufacturer serial numbers. The directive addresses the inspection of overhead stowage compartment X-fixation brackets to ensure their correct installation and presence. It mandates a one-time detailed inspection to prevent potential overhead stowage compartment failure that could cause passenger injury.

May 29, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A320Airbus A321

EASA AD 2020-0118

SUPERSEDED BY EASA 2022-0096

EASA Airworthiness Directive 2020-0118 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A319, A320, and A321 aeroplanes. It addresses a flight safety issue related to automatic go-around procedures when the autopilot is engaged, which can cause an unexpected pitch-up attitude and autopilot disconnection. The directive applies to various Airbus A320 family models with specific serial numbers.

May 22, 2020
Airworthiness DirectiveFlight OpsSafety MgmtAirbus A319Airbus A320Airbus A321

EASA AD 2020-0103

[Correction] Equipment / Furnishings — Emergency Locator Transmitter Protection — Modifications

EASA Airworthiness Directive 2020-0103 is a correction issued by the European Union Aviation Safety Agency concerning Airbus A318, A319, A320, and A321 aeroplanes. It addresses modifications related to the Emergency Locator Transmitter (ELT) protection, specifically targeting ELTs with Part Number 01N65900. The directive mandates modifications to improve ELT battery current injection protection to prevent potential battery fires.

May 8, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD US-2020-07-51

[Final Rule] Engine - High Pressure Turbine 1st-Stage Disks - Removal

[Final Rule] Engine - High Pressure Turbine 1st-Stage Disks - Removal is a Federal Aviation Administration (FAA) airworthiness directive addressing certain International Aero Engines AG (IAE) V2522-A5, V2524-A5, V2525-D5, V2527-A5, V2527E-A5, V2527M-A5, V2528-D5, V2530-A5, and V2533-A5 turbofan engines. It mandates the removal from service of specific high-pressure turbine (HPT) 1st-stage disks due to an uncontained disk failure event on an Airbus A321-231 powered by an IAE V2533-A5 engine. This directive aims to prevent potential engine damage, aircraft damage, and loss of the airplane caused by high-energy debris from disk failure.

Apr 14, 2020
Airworthiness DirectiveMaintenanceSafety MgmtInternational Aero Engines Ag V2500-( )5Airbus A321

EASA AD 2020-0080

SUPERSEDED BY EASA AD 2022-0082

EASA Airworthiness Directive 2020-0080 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates compliance with updated safe life airworthiness limitations as specified in the Airbus A318/A319/A320/A321 Airworthiness Limitations Section (ALS) Part 1 Revision 07. This directive ensures continued airworthiness by requiring operators to adhere to new or more restrictive maintenance tasks and life limits for components.

Apr 1, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0073

SUPERSEDED BY EASA AD 2024-0203

EASA Airworthiness Directive 2020-0073 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It addresses issues with certain trimmable horizontal stabilizer actuators (THSA) that may have deviations from the Component Maintenance Manual acceptance test procedure. The directive mandates replacement of affected THSA parts to ensure continued safe operation of the aircraft.

Mar 26, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0067

SUPERSEDED BY EASA AD 2022-0091

EASA Airworthiness Directive 2020-0067 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aircraft models. It mandates compliance with the Airbus Airworthiness Limitations Section Part 3 Revision 07, which includes certification maintenance requirements and updated maintenance tasks for these aircraft. This directive ensures continued airworthiness by enforcing updated maintenance limits and tasks.

Mar 23, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0053

Nacelles / Pylons — Engine Pylon Nose Fire Seals — Inspection / Replacement

EASA Airworthiness Directive 2020-0053 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A320-271N, A321-271N, A321-271NX, and A321-272N aeroplanes. It addresses inspection and replacement requirements for engine pylon nose fire seals with Part Number D0003109300000 to ensure firewall integrity. The directive mandates a detailed inspection and corrective actions to prevent potential loss of fire protection in case of an engine fire.

Mar 10, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A320Airbus A321Airbus A320-271NAirbus A321-271NAirbus A321-271NXAirbus A321-272N

EASA AD 2020-0044

SUPERSEDED BY EASA AD 2024-0002

EASA Airworthiness Directive 2020-0044 is an airworthiness directive issued by the European Union Aviation Safety Agency addressing certain CFM International CFM56-5B, CFM56-5C, and CFM56-7B engine models installed on Airbus A318, A319, A320, A321, A340, and Boeing 737 series aircraft. The directive mandates inspection and potential replacement of high-pressure turbine inner stationary seals to prevent damage caused by honeycomb separation. This directive aims to ensure continued airworthiness and safety of affected engines and aircraft.

Mar 3, 2020
Airworthiness DirectiveMaintenanceSafety MgmtCFM International CFM56-5BCFM International CFM56-5CCFM International CFM56-7BAirbus A318Airbus A319Airbus A320Airbus A321Airbus A340Boeing 737

EASA AD 2020-0037

[Correction] Fuselage — Frame Foot Coupling at Frame 43 — Inspection / Repair

EASA Airworthiness Directive 2020-0037 is a corrective directive addressing inspection and repair requirements for the fuselage frame foot coupling at frame 43 on Airbus A318, A319, A320, and A321 aircraft. It applies to all serial numbers except those with Airbus modifications 153126 or 153742 incorporated during production. The directive mandates a one-time special detailed inspection and subsequent repair or modification to ensure structural integrity.

Feb 28, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0034

SUPERSEDED BY EASA AD 2022-0102

EASA Airworthiness Directive 2020-0034 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates compliance with the Airbus Airworthiness Limitations Section (ALS) Part 4 Revision 07, which includes system equipment maintenance requirements and life limits for components. This directive ensures continued airworthiness by requiring operators to follow updated maintenance tasks and replacement intervals.

Feb 25, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0019

Fuselage — Lateral Window Frame Upper Fastener Holes — Inspection

EASA Airworthiness Directive 2020-0019 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspections of the lateral window frame upper fastener holes to detect cracks that could compromise structural integrity. The directive applies to specific serial numbers except those with certain Airbus modifications or service bulletins already embodied.

Feb 5, 2020
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2020-0007

Engine — Rotating Air High Pressure Turbine Front Seal — Replacement

EASA Airworthiness Directive 2020-0007 is a regulatory document addressing the replacement of rotating air high pressure turbine (HPT) front seals on CFM International CFM56-5B, CFM56-5C, and CFM56-7B engines. These engines are installed on various Airbus models including A318, A319, A320, A321, A340, and Boeing 737-600, 737-700, 737-800, and 737-900 aircraft. The directive mandates inspections and replacement of specific affected HPT front seals to prevent potential uncontained engine failures.

Jan 15, 2020
Airworthiness DirectiveMaintenanceSafety MgmtCFM International CFM56-5BCFM International CFM56-5CCFM International CFM56-7BAirbus A318Airbus A319Airbus A320Airbus A321Airbus A340Boeing 737-600Boeing 737-700Boeing 737-800Boeing 737-900

EASA AD 2019-0316

SUPERSEDED BY EASA AD 2020-0236

EASA Airworthiness Directive 2019-0316 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes. It addresses a safety issue related to emergency escape slides and rafts, specifically the inflation reservoirs which may have defective rupture disk assemblies. The directive mandates repetitive pressure checks of these inflation reservoirs to ensure proper functionality.

Dec 23, 2019
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321