RegNotify

EASA Regulations for Airbus A318

185 airworthiness directives and regulations affecting Airbus A318.

EASA AD 2026-0142

Wings – Main Landing Gear Support Rib 5 – Inspections

EASA Airworthiness Directive 2026-0142 is an airworthiness directive issued by the European Union Aviation Safety Agency concerning Airbus A318, A319, A320, and A321 aeroplanes with specific manufacturer serial numbers. The directive mandates inspections of the main landing gear support rib 5 due to identified quality issues that could lead to fatigue damage and potential structural failure. It applies to affected parts listed by part and serial numbers in the directive's appendix.

Jul 20, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2026-0136

Flights Controls – Trimmable Horizontal Stabilizer Actuator Ballscrew Lower Splines – Inspection / Replacement

EASA Airworthiness Directive 2026-0136 is an airworthiness directive addressing corrosion issues in the trimmable horizontal stabilizer actuator (THSA) ballscrew lower splines on Airbus A318, A319, A320, and A321 aircraft. It applies to specific THSA part numbers that may suffer corrosion leading to potential loss of control of the airplane. The directive mandates inspections and possible replacement of affected parts to ensure continued airworthiness.

Jul 10, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2026-0133

Fuselage – Centre Fuselage Forward Pressure Bulkhead – Inspection

EASA Airworthiness Directive 2026-0133 is an airworthiness directive addressing inspection requirements for the centre fuselage forward pressure bulkhead on Airbus A318, A319, A320, and A321 aeroplanes. It applies to various models and serial numbers except those with specific Airbus modifications embodied in production or service. The directive mandates repetitive rototest inspections of the forward pressure bulkhead hole C1 and provides an optional terminating modification.

Jul 8, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0274R1

Fire Protection – Fire Panel – Inspection

EASA Airworthiness Directive 2025-0274R1 is a regulatory update addressing fire panel inspections on Airbus A318, A319, A320, and A321 aircraft. It targets specific fire panel part numbers that have been linked to incidents of engine fire switch self-releasing, which could cause uncommanded in-flight engine shutdowns. The directive mandates inspections, replacements, and installation requirements to ensure continued airworthiness and safety.

Jul 7, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0158R2

Landing Gear – Main Landing Gear Door Actuators – Inspections

EASA Airworthiness Directive 2025-0158R2 is an updated regulatory requirement addressing inspections and corrective actions for main landing gear door actuators on Airbus A318, A319, A320, and A321 aircraft models. It targets actuators with specific part number 114122015 and serial numbers listed in Airbus Alert Operators Transmission A32N033-24, aiming to prevent landing gear extension issues caused by actuator assembly errors. The directive mandates repetitive inspections and eventual replacement or modification of affected parts to ensure continued airworthiness.

Jul 7, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2026-0130

Electrical Systems Installation – Battery Retaining Rods – Identification / Replacement

EASA Airworthiness Directive 2026-0130 is an airworthiness directive addressing battery retaining rods on Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspections and potential replacement or reidentification of affected battery retaining rods with Part Number D9241023700000 to prevent battery displacement and associated electrical system failures.

Jul 6, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0237R1

[Correction] Equipment / Furnishings – 80 VU Rack Attachments – Inspection / Repair

The document titled '[Correction] Equipment / Furnishings – 80 VU Rack Attachments – Inspection / Repair' is a correction notice related to Airbus S.A.S. aircraft models A318, A319, A320, and A321. It addresses inspection and repair procedures for the 80 VU rack attachments used in these aircraft. The correction ensures accurate maintenance guidelines for these specific equipment components.

Jun 24, 2026
CorrectionMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2026-0037

Equipment/Furnishings — Evacuation Slide/Inflation Hose Assemblies — Replacement

EASA Airworthiness Directive 2026-0037 is an official safety directive addressing evacuation slide inflation hose assemblies on Airbus A318, A319, A320, and A321 aircraft. It targets specific inflation hose assemblies and door evacuation slides identified by part and serial numbers that have been found to fail during emergency evacuations. The directive mandates the replacement of affected evacuation slides to ensure proper inflation and safe evacuation.

Feb 25, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2026-0028

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 2 — Damage Tolerant Airworthiness Limitation Items — Amendment

EASA Airworthiness Directive 2026-0028 is an amendment concerning the Airbus A318, A319, A320, and A321 aircraft family. It addresses updates to the Airworthiness Limitations Section Part 2, specifically the Damage Tolerant Airworthiness Limitation Items. This directive mandates compliance with revised maintenance tasks and intervals to ensure continued airworthiness of these aircraft models.

Feb 11, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 26-022

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 1, Safe Life Airworthiness Limitation Items — Amendment

EASA Airworthiness Directive 26-022 is a proposed amendment addressing the Time Limits and Maintenance Checks in the Airworthiness Limitations Section Part 1 for Airbus A318, A319, A320, and A321 aeroplanes. It applies to all manufacturer serial numbers of these models and updates the safe life airworthiness limitation items. The directive ensures continued airworthiness by mandating compliance with the latest Airbus ALS Part 1, Revision 11 issue 2.

Feb 4, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 26-023

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 3, Certification Maintenance Requirements — Amendment

EASA Airworthiness Directive 26-023 is a proposed amendment affecting Airbus A318, A319, A320, and A321 aeroplanes. It updates the Airworthiness Limitations Section Part 3, Certification Maintenance Requirements, introducing new and more restrictive maintenance tasks and limitations. This directive applies to all manufacturer serial numbers of the specified Airbus A320 family models.

Feb 4, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 26-024

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 4, System Equipment Maintenance Requirements — Amendment

EASA Airworthiness Directive 26-024 is a proposed amendment addressing time limits and maintenance checks for Airbus A318, A319, A320, and A321 aeroplanes. It updates the Airworthiness Limitations Section Part 4 concerning System Equipment Maintenance Requirements. This directive applies to all manufacturer serial numbers of the specified Airbus A320 family models.

Feb 4, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 26-025

Time Limits / Maintenance Checks — Airworthiness Limitations Section Part 5, Fuel Airworthiness Limitations — Amendment

EASA Airworthiness Directive 26-025 is a proposed amendment affecting Airbus A318, A319, A320, and A321 aeroplanes. It updates the Airworthiness Limitations Section Part 5 related to Fuel Airworthiness Limitations, applying to all manufacturer serial numbers of these aircraft models. The directive mandates compliance with the latest Airbus ALS Part 5, Revision 10, to ensure continued airworthiness.

Feb 4, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2026-0017

Equipment / Furnishings — Galley — Inspection

EASA Airworthiness Directive 2026-0017 is an inspection directive addressing forward-facing galley equipment on Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspections and corrective actions for specific galley part numbers to prevent damage such as delamination and corrosion that could lead to trolley detachment during emergency landings. The directive applies to all serial numbers of the affected aircraft models.

Jan 23, 2026
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0274

[Correction] Fire Protection — Fire Panel — Inspection

The document titled '[Correction] Fire Protection — Fire Panel — Inspection' is a correction notice related to the Airbus S.A.S. aircraft types A318, A319, A320, and A321. It addresses inspection procedures for the fire protection fire panel systems on these specific Airbus models. The correction aims to clarify or amend previous instructions to ensure proper maintenance and safety compliance.

Dec 11, 2025
CorrectionMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0258

Landing Gear — Nose Landing Gear Sliding Tube — Inspection

EASA Airworthiness Directive 2025-0258 is an airworthiness directive addressing the nose landing gear sliding tube on Airbus A318, A319, A320, and A321 aeroplanes. It mandates inspection of specific nose landing gear sliding tubes with part number 50-3752016-00 and certain serial numbers for overheat damage and cracks. The directive applies to all affected serial numbers listed and requires corrective actions if discrepancies are found.

Nov 21, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0253

SUPERSEDED BY EASA AD 2025-0274

EASA Airworthiness Directive 2025-0253 is issued for Airbus A318, A319, A320, and A321 aeroplanes concerning fire panels with specific part numbers. The directive addresses the risk of engine fire switch self-releasing, which can cause uncommanded in-flight engine shutdown. It mandates inspection, replacement, and repair of affected fire panels to ensure continued airworthiness.

Nov 14, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0248

Equipment / Furnishings — Overhead Stowage Compartments — Inspection / Repair

EASA Airworthiness Directive 2025-0248 is an airworthiness directive issued by the European Union Aviation Safety Agency addressing Airbus A318, A319, A320, and A321 aeroplanes equipped with ARIES overhead stowage compartments. The directive mandates inspection and repair of specific overhead stowage compartments to ensure their structural integrity. It applies to affected parts identified by certain part numbers and excludes aircraft with specific Airbus modifications embodied in production.

Nov 6, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0207R1

Fuselage — Seat Rail Connections Nylon Bushes — Replacement

EASA Airworthiness Directive 2025-0207R1 is an updated regulatory requirement addressing the replacement of nylon bushes with bronze bushes in the seat rail connections of Airbus A318, A319, A320, and A321 aircraft. This directive applies to all manufacturer serial numbers except those with Airbus modifications 152721 and 154725 incorporated. It aims to ensure continued airworthiness by mitigating risks associated with broken bolts in critical seat rail areas.

Oct 30, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321

EASA AD 2025-0237

Equipment / Furnishings — 80 VU Rack Attachments — Inspection / Repair

EASA Airworthiness Directive 2025-0237 is an airworthiness directive issued by the European Union Aviation Safety Agency affecting Airbus A318, A319, A320, and A321 aeroplanes, including both Current Engine Option (CEO) and New Engine Option (NEO) models. The directive addresses inspection and repair requirements for the 80 VU rack attachments, which house critical flight control, communication, and radio-navigation computers. It mandates repetitive inspections and corrective actions to ensure the structural integrity of the 80 VU rack fittings and prevent potential system failures.

Oct 27, 2025
Airworthiness DirectiveMaintenanceSafety MgmtAirbus A318Airbus A319Airbus A320Airbus A321