Powerplant – Engine Mounts – Inspection
Proposal for consultation. Not binding until EASA issues the final AD; the requirements can still change.
- Published
AI-generated summary of the official EASA document. Verify against the PDF before acting.
What to do
Operators of Airbus A300 B4-603, B4-605R, C4-605R variant F, F4-605R, and A310-304 and A310-308 aeroplanes must identify if affected engine mount parts are installed. For those with affected parts, engines must be replaced with serviceable ones before 6,900 flight cycles elapse since the last fluorescent penetrant inspection. Installation of affected engines is permitted only if they are replaced within the required timeframe. Comments on the proposal must be submitted by 16 December 2026.
Summary
EASA Airworthiness Directive Proposal PAD No. 26-140 addresses inspection requirements for engine mounts on Airbus A300-600 and A310 aeroplanes equipped with General Electric CF6-80C2 series engines. The directive targets specific engine mount platform assemblies and lower mount rear beams that may have been improperly inspected during fluorescent penetrant inspections. It aims to ensure structural integrity by mandating inspections and possible replacements of affected parts.
What changed
This new proposed Airworthiness Directive introduces a one-time inspection requirement for affected engine mount parts due to a quality issue identified in fluorescent penetrant inspections performed without the required developer. It requires replacement of engines with affected parts before accumulating 6,900 flight cycles since the last inspection and allows installation of affected engines only if they are replaced within the specified timeframe.
Why it matters
This directive is critical for aviation professionals as it addresses a potential safety risk from undetected cracks in engine mount components, which could lead to structural failures. Operators and maintenance organizations must ensure compliance to prevent unsafe conditions and maintain airworthiness. The directive also clarifies inspection and replacement procedures, helping compliance teams manage maintenance schedules effectively.
More for Airbus A300-600
All 66- EASA PAD 26-135Oxygen – Chemical Oxygen Generators – ReplacementNov 11, 2026
- EASA PAD 26-132Placards and Markings - Main Deck Cargo Door Operation Limitation - Installation; Doors – Main Deck Cargo Door Actuator Bearing Fittings – Inspection / Opening ProhibitionNov 4, 2026
- EASA AD 2026-0209Wings – Main Landing Gear Attachment / Rib 5 Forward Lug – Inspection(s)Nov 3, 2026
- EASA PAD 26-109Wings – Main Landing Gear Attachment / Rib 5 Forward Lug – Inspection(s)Sep 18, 2026
- EASA PAD 26-013
Get the next one by email
New ADs and bulletins for these 6 aircraft types, summarized like this page, every Monday.