Doors – Forward and Aft Cargo Door Seals – Inspection / Replacement
- Published
- Takes effect
AI-generated summary of the official EASA document. Verify against the PDF before acting.
What to do
Operators of Airbus A350-941 and A350-1041 aeroplanes must identify if affected cargo door seals are installed and replace them with serviceable parts within 12 months from 2026-12-02. Maintenance teams must cease using the temporary repair procedure from the effective date and avoid installing any affected parts or cargo doors containing them. Compliance can also be achieved by replacing the entire cargo door with one having serviceable seals.
Summary
EASA Airworthiness Directive 2026-0220 is an airworthiness directive applicable to Airbus A350-941 and A350-1041 aeroplanes. It addresses the inspection and replacement of forward and aft cargo door seals with specific part numbers that have been repaired using a maintenance procedure incorrectly published as a permanent repair. The directive mandates replacement of these affected cargo door seals to ensure proper airtightness and fire extinguishing system effectiveness in the cargo compartments.
What changed
This new airworthiness directive introduces a requirement to replace forward and aft cargo door seals, part numbers V0007007220200 and V0007007320200, if they were repaired using a maintenance procedure intended only as a temporary fix. It prohibits further maintenance using the temporary repair procedure and forbids (re)installation of affected parts. The directive also accepts replacement of entire cargo doors with serviceable parts as a compliance method.
Why it matters
This directive is critical for aviation professionals because the affected cargo door seals may compromise the airtightness and halon retention capability of the cargo compartments, potentially reducing the effectiveness of the fire extinguishing system. Operators and maintenance organizations must ensure compliance to maintain aircraft safety and regulatory conformity. Failure to comply could lead to unsafe conditions and regulatory penalties.
More for Airbus A350
All 229- EASA PAD 26-141Flight Controls – Flight Control and Guidance System – ModificationNov 18, 2026
- EASA AD 2026-0218Time Limits / Maintenance Checks – Damage Tolerant Airworthiness Limitation Items Part 2 – AmendmentNov 13, 2026
- EASA AD 2026-0214Electrical Power – Emergency Electrical Network Management Unit – Modification / Re-IdentificationNov 5, 2026
- EASA AD 2026-0210Stabilizers – Trimmable Horizontal Stabilizer Centre Joint Pivot Fitting – InspectionsNov 3, 2026
Get the next one by email
New ADs and bulletins for Airbus A350, summarized like this page, every Monday.