EASA Regulations for Viking Air DHC-2 Mk. I

3 airworthiness directives and regulations affecting Viking Air DHC-2 Mk. I.

Get the next one by email

New ADs and bulletins for Viking Air DHC-2 Mk. I, summarized like the ones below, every Monday.

EASA AD CF-2020-22

Jun 18, 2020

Fuselage Structure — Inspection and replacement of fuselage struts

The Canadian Airworthiness Directive CF-2020-22 addresses inspection and replacement requirements for fuselage struts on Viking Air Ltd. DHC-2 Mk. I, Mk. II, and Mk. III aircraft. It mandates updated inspection procedures including visual, borescope, and non-destructive inspections to prevent structural failure caused by corrosion and damage to fuselage struts and airframe lugs. The directive also introduces improved strut part numbers with enhanced corrosion resistance.

Airworthiness Directive
  • Viking Air DHC-2
  • Viking Air DHC-2 Mk. I
  • Viking Air DHC-2 Mk. II
  • Viking Air DHC-2 Mk. III

EASA AD CF-2019-25

Jul 9, 2019

Airframe — Corrosion

The Canadian Airworthiness Directive CF-2019-25 addresses corrosion inspection and control for Viking Air Ltd. DHC-2 Mk. I, Mk. II, and Mk. III aircraft. It mandates compliance with the revised Supplemental Inspection and Corrosion Control Manual (PSM 1-2-5, Revision 1) to ensure aging aircraft are properly inspected and maintained to prevent corrosion-related safety issues. This directive replaces previous corrosion-related directives for these aircraft models.

Airworthiness Directive
  • Viking Air DHC-2
  • Viking Air DHC-2 Mk. I
  • Viking Air DHC-2 Mk. II
  • Viking Air DHC-2 Mk. III

EASA AD CF-2018-10

Apr 5, 2018

Fuselage — Cracking of Forward and Aft Wire Pull Fittings

The Canadian Airworthiness Directive CF-2018-10 addresses cracking issues in the forward and aft wire pull fittings on Viking Air Limited DHC-2 Mk. I and Mk. III aeroplanes equipped with specific gross weight increase kits. The directive applies to aircraft fitted with float strut wire pull fittings part numbers VALTBS1245-1/-2 and VALTBS1244-1. It mandates replacement of these fittings with improved parts made from a corrosion-resistant aluminum alloy and requires recurring inspections to ensure continued airworthiness.

Airworthiness Directive
  • Viking Air DHC-2
  • Viking Air DHC-2 Mk. I
  • Viking Air DHC-2 Mk. III