RegNotify

EASA Regulations for Nzskydive 750XL

22 airworthiness directives and regulations affecting Nzskydive 750XL.

EASA AD DCA-750XL-38A

Flap Assembly Screw Jack — Inspection

The Airworthiness Directive DCA/750XL/38A Flap Assembly Screw Jack – Inspection issued by the Civil Aviation Authority of New Zealand mandates inspection of flap screw jack assemblies on Pacific Aerospace Limited 750XL aircraft, specifically serial numbers 101 through 215, 220, 8001, and 8002, as well as spare parts with part numbers 11-45621-1 and 11-45622-1. This directive addresses potential incorrect assembly of the flap screw jack bearing retainer and stop, which could lead to fatigue failure. Compliance with the inspection and corrective actions outlined in Pacific Aerospace Mandatory Service Bulletin PACSB/XL/117 issue 2 is required.

Aug 30, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-39

Fuel Condition Lever — Inspection

Airworthiness Directive DCA/750XL/39 is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace Limited 750XL aircraft with serial numbers 101 through 216, 220, 8001, and 8002. This directive mandates inspection and adjustment of the fuel condition lever to prevent inadvertent movement into the cut-off position when ground idle is selected. The directive references Pacific Aerospace Mandatory Service Bulletin PACSB/XL/111 issue 1 dated 18 June 2019 for detailed instructions.

Aug 30, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-37

Engine Fuel Lines and Electrical Wiring — Inspection

Airworthiness Directive DCA/750XL/37 Engine Fuel Lines and Electrical Wiring – Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace Limited 750XL aircraft, serial numbers 101 through 215, 220, 8001, and 8002 fitted with or configured for an air conditioner and/or a standby alternator. This directive mandates inspection of engine fuel feed line hoses and electrical wiring forward of the engine firewall to detect chafing that could cause fuel leaks and fire. It references Pacific Aerospace Mandatory Service Bulletin PACSB/XL/113 issue 2 for inspection and corrective actions.

Apr 24, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-35

Engine Mount Chafing — Inspection

Airworthiness Directive DCA/750XL/35 Engine Mount Chafing – Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace Limited 750XL aircraft with serial numbers 101 through 215, 220, and 8001, 8002. This directive mandates inspection and preventive measures to address potential chafing damage involving the engine mount, Beta control rod, and inter-turbine temperature sensing probe. The directive references compliance with Pacific Aerospace Mandatory Service Bulletin PACSB/XL/102 issue 2 or later revisions.

Feb 1, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-36

Fuel Pickup Assembly and Wing Spar Web — Inspection

Airworthiness Directive DCA/750XL/36 Fuel Pickup Assembly and Wing Spar Web – Inspection is issued by the Civil Aviation Authority of New Zealand for Pacific Aerospace Limited 750XL aircraft, specifically serial numbers 177, 186 through 213, 220, 8001, and 8002. This directive mandates inspection of the fuel pickup assembly and wing spar web to detect cracks that may arise from a pre-stressed installation condition. The directive references Pacific Aerospace Mandatory Service Bulletin PACSB/XL/109 issue 1 dated 16 January 2019 for inspection and corrective actions.

Feb 1, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-34

Port Wing Internal Tank Abrasion — Inspection

Airworthiness Directive DCA/750XL/34 is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace Limited 750XL aircraft, serial numbers 100 through 213 (excluding 206) and 8001. This directive mandates inspection and potential repair of the port wing internal tank to address abrasion caused by fuel finger filters. The directive aims to prevent fuel leaks due to chafing damage in the wing skin.

Feb 1, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-33A

Aileron Pivot Fork Assembly — Inspection

The Airworthiness Directive DCA/750XL/33A issued by the Civil Aviation Authority of New Zealand mandates inspection and modification of the aileron pivot fork assembly on Pacific Aerospace Limited 750XL aircraft, specifically all serial numbers up to and including 220, 8001, and 8002. This directive requires operators to inspect the bearing assemblies on both starboard and port control columns and to implement retaining features as detailed in Pacific Aerospace Mandatory Service Bulletin PACSB/XL/115 issue 3 dated 21 January 2019.

Jan 31, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-32B

Landing Gear - Nose and Main Landing Gear Attachment Bolts — Inspection

The Airworthiness Directive DCA/750XL/32B issued by the Civil Aviation Authority of New Zealand mandates inspection and modification of nose and main landing gear attachment bolts on Pacific Aerospace Limited 750XL aircraft, specifically all serial numbers up to and including 216, 220, 8001, and 8002. This directive requires compliance with Pacific Aerospace Mandatory Service Bulletin PACSB/XL/105 issue 4, dated 19 December 2018, to ensure dual retaining devices are installed on the landing gear bolts.

Jan 31, 2019
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-31

Firewall Wiring Penetrations — Inspection

The Airworthiness Directive DCA/750XL/31 Firewall Wiring Penetrations – Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace Limited 750XL aircraft with serial numbers up to and including 221. This directive mandates inspection and corrective action to address potential ineffective firewall sealing for wiring penetrations. The directive requires compliance with Pacific Aerospace Mandatory Service Bulletin PACSB/XL/101 issue 1 or later approved revisions.

Jun 29, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-29

Refrigerant Hose Insulation — Inspection

Airworthiness Directive DCA/750XL/29 Refrigerant Hose Insulation – Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace Limited 750XL aircraft with serial numbers up to and including 208 that have factory air-conditioning modification PAC/XL/0409 or modification PAC/XL/0618. This directive mandates inspection and correction of non-compliant insulation lagging on the refrigerant hoses of the air-conditioning system to ensure safety. The directive requires compliance with Pacific Aerospace Mandatory Service Bulletin PACSB/XL/086 issue 2 or later approved revisions.

Jun 29, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-30

Relocation of Ground Terminations — Inspection

The Airworthiness Directive DCA/750XL/30 Relocation of Ground Terminations – Inspection is issued by the Civil Aviation Authority of New Zealand. It applies to Pacific Aerospace Limited 750XL aircraft, serial numbers up to and including 222, equipped with a main battery located within the engine bay at the firewall. This directive mandates inspection and modification of the aircraft's ground connections for power sources to enhance safety.

Jun 29, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-19A

Engine Oil Pressure Indicator — Replacement

The Airworthiness Directive DCA/750XL/19A Engine Oil Pressure Indicator — Replacement issued by the Civil Aviation Authority of New Zealand mandates inspections and replacements related to the engine oil pressure indication system on Pacific Aerospace Limited 750XL aircraft. It applies to all serial numbers of the 750XL model and addresses issues with low oil pressure indication warnings. The directive includes updates to the Pilots Operating Handbook and replacement or modification of specific oil pressure switches and indicators.

Apr 26, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace Limited 750XL

EASA AD DCA-750XL-28

Elevator Bellcrank Pivot - Inspection

The Airworthiness Directive DCA/750XL/28 Elevator Bellcrank Pivot - Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace 750XL aircraft with serial numbers up to and including 215. This directive mandates inspection of the elevator bellcrank pivot joint bolt to ensure the correct bolt length is installed. It specifically addresses the potential use of a bolt part number AN4-20 that is too short, requiring replacement with bolt part number AN4-21 if found.

Mar 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-24A

Pitot Static Tube Support Clamps - Inspection

Airworthiness Directive DCA/750XL/24A Pitot Static Tube Support Clamps - Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace 750XL aircraft with serial numbers up to and including 220. This directive mandates inspection and corrective actions on the pitot static tube support clamps to prevent chafing at the flame arrestor intersection. Compliance is required to ensure continued airworthiness and safety of the affected aircraft.

Mar 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-25A

Wing Leading Edge Tank Abrasion - Inspection

Airworthiness Directive DCA/750XL/25A Wing Leading Edge Tank Abrasion - Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace 750XL aircraft with serial numbers up to and including 135, except S/N 113. This directive mandates inspection of the wing leading edge skin to detect abrasion caused by ventilation duct chafing, which could lead to fuel leaks. The inspection must follow the instructions in Mandatory Service Bulletin PACSB/XL/091 issue 3 or later revisions.

Mar 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-27A

Firewall Sound Insulation - Inspection

Airworthiness Directive DCA/750XL/27A Firewall Sound Insulation - Inspection is issued by the Civil Aviation Authority of New Zealand and applies to all Pacific Aerospace 750XL aircraft with serial numbers up to and including 215. This directive mandates inspection of the firewall's aft face sound insulation material to ensure compliance with burn test criteria specified in FAR 23.853(f). If non-compliant black foam insulation is found, it must be removed following the instructions in Pacific Aerospace Mandatory Service Bulletin PACSB/XL/095.

Mar 1, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-18B

Fin Forward Pickup — Inspection

The Airworthiness Directive DCA/750XL/18B Fin Forward Pickup – Inspection issued by the Civil Aviation Authority of New Zealand mandates inspection and maintenance actions for Pacific Aerospace 750XL aircraft, serial numbers up to 193, 195, and 197. It addresses potential fatigue cracks in the fin forward pickup component to ensure continued airworthiness and safety. The directive references Pacific Aerospace Limited Mandatory Service Bulletin PACSB/XL/068 issue 6 dated 8 January 2018 for detailed procedures.

Feb 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-26

Rudder and Elevator Trim Drive Coupling - Modification

Airworthiness Directive DCA/750XL/26 Rudder and Elevator Trim Drive Coupling - Modification is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace 750XL aircraft with specific serial numbers. The directive mandates modification of the rudder and elevator trim drive coupling to prevent disengagement issues. This ensures the continued safe operation of the affected aircraft by maintaining effective trim system functionality.

Feb 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-22A

Ventilation Hose behind Instrument Panel - Inspection

Airworthiness Directive DCA/750XL/22A Ventilation Hose behind Instrument Panel - Inspection is issued by the Civil Aviation Authority of New Zealand and applies to all Pacific Aerospace 750XL aircraft with serial numbers up to and including 220. This directive mandates inspection and potential repair of the ventilation SCAT hose behind the instrument panel to prevent chafing damage to components and wiring. Compliance with the specified Pacific Aerospace Mandatory Service Bulletin PACSB/XL/083 issue 2 is required.

Feb 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL

EASA AD DCA-750XL-23

Cockpit Control Handles - Inspection

Airworthiness Directive DCA/750XL/23 Cockpit Control Handles - Inspection is issued by the Civil Aviation Authority of New Zealand and applies to Pacific Aerospace 750XL aircraft with serial numbers up to and including 215. This directive mandates inspection and corrective actions to prevent snagging of the control column with the cockpit control tee handles. The inspections must follow the instructions in Pacific Aerospace Mandatory Service Bulletin PACSB/XL/093 issue 1 or later approved revisions.

Dec 21, 2017
Airworthiness DirectiveMaintenanceSafety MgmtNzskydive 750XLPacific Aerospace 750XL