EASA Regulations for Lockheed Martin C-130

4 airworthiness directives and regulations affecting Lockheed Martin C-130.

Get the next one by email

New ADs and bulletins for Lockheed Martin C-130, summarized like the ones below, every Monday.

EASA AD US-2024-01-02

Jan 10, 2024

Fuselage - Aft Fuselage Sloping Longerons - Records Review / Inspection

The Federal Aviation Administration's Airworthiness Directive 2024-01-02 addresses Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382 series and C-130 series airplanes. This directive concerns aft fuselage sloping longerons that may have been exposed to excessive heat during manufacturing, potentially reducing their mechanical strength and compromising structural integrity. The AD applies to specific part numbers and requires inspections and records reviews to ensure airworthiness.

Airworthiness Directive
  • Lockheed Martin Corporation 382 (Hercules)
  • Lockheed Martin 382
  • Lockheed Martin C-130

EASA AD US-2023-11-10

Jun 27, 2023

Fuselage - Aft Fuselage Sloping Longerons - Inspection

Federal Aviation Administration Airworthiness Directive 2023-11-10 is a final rule addressing Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382 series and C-130 series airplanes. It targets the inspection of aft fuselage sloping longerons, specifically those with part number 342986-( ), due to a quality audit revealing overaged, understrength longerons. This directive mandates conductivity and hardness checks to ensure structural integrity and prevent potential failure.

Airworthiness Directive
  • Lockheed Martin Corporation 382 (Hercules)
  • Lockheed Martin 382
  • Lockheed Martin C-130

EASA AD US-2023-09-13

May 22, 2023

Wings - Center Wing Upper and Lower Rainbow Fittings - Repetitive Inspection

Airworthiness Directive 2023-09-13 is a final rule issued by the Federal Aviation Administration addressing Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382 series and C-130 series airplanes, including C-130H models. This directive mandates repetitive inspections of the center wing upper and lower rainbow fittings for cracks and requires replacement if cracks are found to ensure continued airworthiness.

Airworthiness Directive
  • Lockheed Martin Corporation 382 (Hercules)
  • Lockheed Martin Model 382
  • Lockheed Martin C-130
  • Lockheed Martin C-130H

EASA AD US-2019-25-20

Jan 28, 2020

Flight Controls - Elevator Booster Actuator - Inspections

The Federal Aviation Administration (FAA) Airworthiness Directive 2019-25-20 is a final rule addressing Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 382 series and various C-130 model airplanes, including restricted and amateur category types. This directive mandates inspections of the elevator booster actuator assemblies due to reported hydraulic fluid leaks caused by fatigue cracks in the actuator cylinders. The directive aims to ensure continued airworthiness and safety of these aircraft by requiring part number identification, repetitive ultrasonic inspections, and replacement of cracked assemblies.

Airworthiness Directive
  • Lockheed Martin Corporation 382 (Hercules)
  • Lockheed Martin Model 382
  • Lockheed Martin C-130