RegNotify

EASA Regulations for Boeing 737-100

30 airworthiness directives and regulations affecting Boeing 737-100.

EASA AD US-2018-09-13

Wings - Main Landing Gear Support Fittings, Rear Spar and Inspar Upper Skin - Inspection

The Federal Aviation Administration's Airworthiness Directive 2018-09-13 addresses all Boeing 737-100, -200, -200C, -300, -400, and -500 series airplanes. This directive mandates inspections and corrective actions for cracking found in the wing inspar upper skin, rear spar upper chord, rear spar web, and main landing gear beam forward support fitting. It aims to ensure structural integrity and prevent potential fuel leaks and fire hazards.

Jun 19, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2018-10-12

Wings - Fuselage Keel Beam Upper Chords / Aft Vertical Stiffeners - Inspection

Airworthiness Directive 2018-10-12 is a final rule issued by the Federal Aviation Administration addressing all Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. It mandates repetitive high frequency eddy current and detailed inspections for cracking in aft vertical stiffeners and keel beam upper chords, along with applicable on-condition corrective actions. This directive aims to ensure structural integrity by detecting and mitigating fatigue cracks in critical wing fuselage components.

Jun 7, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2018-09-01

Wings - Main Landing Gear Beam Forward Support Fitting - Inspection

The Federal Aviation Administration Airworthiness Directive 2018-09-01 addresses all Boeing 737-100, -200, -200C, -300, -400, and -500 series airplanes. It mandates repetitive inspections of the main landing gear beam forward support fitting due to reported cracks that could compromise structural integrity. This directive aims to prevent potential fuel leaks, structural failures, or main landing gear collapse.

May 3, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2018-04-12

Fuel - Fuel Tank - Inspection / Revision of the Maintenance or Inspection Program

Airworthiness Directive 2018-04-12 is a final rule issued by the Federal Aviation Administration (FAA) addressing all Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This directive mandates modifications to fuel tank wiring to prevent electrical arcing and potential fuel tank explosions. It requires installation of shielded wire bundles and convoluted liners within fuel tank conduits and updates to the maintenance or inspection program to include specific airworthiness limitations.

Mar 27, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2018-04-08

Fuselage - Aft Pressure Bulkhead Gore Webs, Lap Splices and Repair Webs - Inspection

Federal Register Volume 83, Number 39 (2018) Final Rule Airworthiness Directive addresses all Boeing 737-100, -200, -200C, -300, -400, and -500 series airplanes. It mandates repetitive inspections of the aft pressure bulkhead gore webs, lap splices, and repair webs to detect widespread fatigue damage. The directive aims to prevent potential rapid decompression and loss of structural integrity.

Mar 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2018-04-06

Fuselage - Forward Entry Door Cut-out Intercostals / Frame Inner Chord — Inspection / Repair

Federal Aviation Administration Airworthiness Directive 2018-04-06 is a final rule addressing The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. It mandates inspections and repairs related to cracking in the fuselage forward entry door cut-out intercostals and frame inner chord to ensure structural integrity and prevent potential loss of the forward entry door and rapid decompression.

Mar 23, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2018-01-08

Fuselage - Frame Outboard Chord / Auxiliary Chord - Inspection

Federal Register Volume 83, Number 9 (2018-01-12) Final Rule Airworthiness Directive 2018-01-08 addresses all Boeing 737-100, -200, -200C, -300, -400, and -500 series airplanes. It mandates inspections for fatigue cracking in the frame outboard chord and the radius of the auxiliary chord, with required corrective actions if cracks are found. This directive aims to maintain structural integrity and prevent rapid decompression.

Jan 24, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2017-25-10

Stabilizers - Elevator Hinges - Inspections / Replacement

Federal Aviation Administration Airworthiness Directive 2017-25-10 is a final rule addressing all Boeing 737-100, -200, -200C, -300, -400, and -500 series airplanes. It mandates repetitive inspections, replacements, and tests of elevator hinge components and bearing plates to prevent potential disconnection of elevator hinges that could lead to horizontal stabilizer structural degradation. This directive aims to ensure continued airworthiness and safe flight by mitigating risks associated with bearing plate slider bushing wear.

Jan 18, 2018
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA AD US-2017-24-05

[Correction] Wings - Upper Aft Skin - Inspection

Correction to Airworthiness Directive 2017-24-05 issued by the Federal Aviation Administration (FAA) affecting The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This directive addresses repetitive inspections and necessary repairs for cracking in the upper aft skin at the rear spar of the wings. The correction clarifies the applicability section regarding the affected airplane models.

Dec 22, 2017
Airworthiness DirectiveMaintenanceSafety MgmtBoeing 737Boeing 737-100Boeing 737-200Boeing 737-200CBoeing 737-300Boeing 737-400Boeing 737-500

EASA SIB 2008-04R1

Pratt & Whitney JT8D Series Engines Rotating Group Components - Notification of Unapproved Parts due to Theft

EASA Safety Information Bulletin 2008-04R1 notifies operators and manufacturers about unapproved rotating group components for Pratt & Whitney JT8D series engines due to theft. The affected parts, identified by specific part and serial numbers, are installed on aircraft including Boeing 737-100 and -200 series, as well as McDonnell Douglas DC-9, MD-88, and MD-90-30 models. The bulletin aims to raise awareness that these stolen parts should not be used in any aircraft or held as spares.

Jul 17, 2008
Safety Information BulletinMaintenanceSafety MgmtBoeing 737-100Boeing 737-200McDonnell Douglas DC-9McDonnell Douglas MD-88McDonnell Douglas MD-90-30