EASA Regulations for Bell Helicopter Textron 412

6 airworthiness directives and regulations affecting Bell Helicopter Textron 412.

EASA AD 2021-0148

Equipment & Furnishings — Emergency Flotation System — Rotorcraft Flight Manual (Supplement)

EASA Airworthiness Directive 2021-0148 is an update addressing the Emergency Flotation System (EFS) information in the Rotorcraft Flight Manual (Supplement) for Sikorsky S-76 and S-92A helicopters, Bell Helicopter Textron 212, 214B, 214ST, 412 series, and Bell Helicopter Textron Canada 222, 230, and 430 helicopters equipped with EFS. It mandates amendments to the Limitations Section of the flight manuals to include demonstrated sea state conditions for ditching performance of the EFS. This directive applies to helicopters with EFS installed as optional kits or via Supplemental Type Certificates.

Jun 21, 2021

Airworthiness DirectiveFlight OpsSafety MgmtBell 222Bell 230Bell 430Bell Textron Inc. (Bti) 212Bell Textron Inc. (Bti) 214STBell Textron Inc. (Bti) 412Mcdermott 214 Holdings, 214Sikorsky S-76Sikorsky S-92Sikorsky S-92ABell Helicopter Textron 212Bell Helicopter Textron 214BBell Helicopter Textron 214STBell Helicopter Textron 412Bell Helicopter Textron Canada 222Bell Helicopter Textron Canada 230Bell Helicopter Textron Canada 430

EASA AD US-2020-02-11

Electrical Power - Static Inverters - Replacement

Airworthiness Directive 2020-02-11 is a final rule issued by the Federal Aviation Administration addressing Bell Helicopter Textron Inc. Model 412 and 412EP helicopters. It mandates the replacement of certain static inverters with improved versions to correct unsafe conditions caused by inverter failures. The directive applies specifically to static inverters with part numbers 412-375-079-101 or 412-375-079-103 having serial numbers 29145 or higher.

Feb 17, 2020

Airworthiness DirectiveMaintenanceSafety MgmtBell Textron Inc. (Bti) 412Bell Helicopter Textron 412Bell Helicopter Textron 412EP

EASA AD US-2019-09-02

Engine Oil / Aircraft Fuel System - Oil / Fuel Check Valves - Replacement

Airworthiness Directive 2019-09-02 is a final rule issued by the Federal Aviation Administration addressing Bell Helicopter Textron, Inc. models 212, 412, 412CF, and 412EP. It mandates the replacement of certain engine oil and fuel check valves manufactured by Circor Aerospace, which have been found to crack or leak, potentially causing engine failure or fire. This directive expands previous requirements to include all affected helicopter models to ensure continued airworthiness and safety.

Jun 4, 2019

Airworthiness DirectiveMaintenanceSafety MgmtBell Textron Inc. (Bti) 212Bell Textron Inc. (Bti) 412Bell Helicopter Textron 212Bell Helicopter Textron 412Bell Helicopter Textron 412CFBell Helicopter Textron 412EP

EASA AD 2014-0118R1

Main Rotor Drive — Engine-to-Transmission Drive Shaft Line Nuts — Inspection / Replacement

EASA Airworthiness Directive 2014-0118R1 is a regulatory document addressing the inspection and replacement of engine-to-transmission drive shaft line nuts on Bell Helicopter Textron Inc. 212, 412, and 412EP helicopter models. The directive focuses on nuts with part numbers MS21042L4 and MS21042L5, which were found to be susceptible to cracking due to a production defect causing hydrogen embrittlement. This AD mandates inspections and replacement procedures to prevent potential loss of main rotor power.

Sep 25, 2018

Airworthiness DirectiveMaintenanceSafety MgmtBell Textron Inc. (Bti) 212Bell Textron Inc. (Bti) 412Bell Helicopter Textron 212Bell Helicopter Textron 412Bell Helicopter Textron 412EP

EASA AD US-2018-17-01

SUPERSEDED BY FAA AD 2019-09-02

Airworthiness Directive 2018-17-01 supersedes AD 2017-15-02 and applies to Bell Helicopter Textron, Inc. Model 212, 412, 412CF, and 412EP helicopters. It addresses unsafe conditions related to certain Circor Aerospace engine oil and fuel check valves, part numbers 209-062-520-001 and 209-062-607-001, manufactured between October 2011 and March 2015, excluding those marked with "TQL". The directive requires inspection and replacement of these check valves to prevent potential engine failure or fire.

Aug 27, 2018

EASA SIB 2007-11

FAA SAIB SW-07-29 - Aeronautical Accessories, Inc. (AAI) High Skid Gear Crosstubes

FAA Special Airworthiness Information Bulletin (SAIB) SW-07-29 and EASA Safety Information Notice 2007-11 address potential cracking and premature failure of Aeronautical Accessories, Inc. (AAI) part number 412-321 series high skid gear crosstubes installed on Bell Helicopter Textron Model 412, 412EP, 412CF, and Agusta S.p.A. Model AB412 and AB412EP helicopters. These crosstubes, installed under AAI's Supplemental Type Certificate SR01052AT, may fail before reaching the FAA-approved life limit, posing safety risks during operations.

May 23, 2007

Safety Information BulletinMaintenanceSafety MgmtBell Helicopter Textron 412Bell Helicopter Textron 412EPBell Helicopter Textron 412CFAgusta S.p.A. AB412Agusta S.p.A. AB412EP